1 Version 1.0
720P Wi-Fi Borescope
SKU: BORESCOPE720
2 Version 1.0
THANK YOU FOR PURCHASING THE
BORESCOPE720
Please read this manual before operating the
device and keep it handy.
Your purchase should include:
• 1 x BORESCOPE720
• 1 x Wi-Fi Module
• 1 x Micro USB to USB Cable
• 1 x Attachable Hook
• 1 x Attachable Magnet
• 1 x Attachable Side View Mirror
• 2 x 3M Adhesive Suction Cup Pads
3 Version 1.0
GET FAMILIAR WITH YOUR DEVICE
4 Version 1.0
A. Power Button
B. Indicator LEDs
C. Camera Connection Port
D. Charging Port
5 Version 1.0
OPERATING YOUR DEVICE
IMPORTANT NOTICE: Allow the device to charge
4-6 hours before using it.
HOW TO CHARGE THE DEVICE
1. Plug the Micro USB cable into the
charging port on the device (figure D)
and the other end into a wall charger or
your computer.
a. The indicator light will be a solid
red while charging.
b. The indicator light will turn off
once done charging.
HOW TO CONNECT TO THE DEVICE
1. Download the ‘WiFi Check’ app from the
app store or go to the below links.
a. Android –
www.minigadgets.com/wcdroid
b. iOS –
www.minigadgets.com/wcios
6 Version 1.0
2. Plug the end of the borescope cable into
the camera connection port of the wi-fi
module (figure C).
3. Power the wi-fi module on by pressing
the power button (figure A) for 2
seconds and letting go.
a. The indicator lights will turn a
solid blue and green.
4. The wi-fi module will begin broadcasting
its own wi-fi signal. Go to your phone’s
wi-fi settings and connect to the wi-fi
signal that starts with “DN”.
a. EXAMPLE: “DN-B30E”
5. Once your phone is connected to the
network, open the WiFi Check app on
your smartphone or tablet.
6. The application will automatically start
up with a view of what the borescope is
seeing.
7 Version 1.0
APP ICON EXPLANATION
1. Photo Capture
2. Video Capture
3. Photo/Video
Album
4. 360-degree view
rotation
5. 180-degree view
rotation
6. Resolution
adjustment
8 Version 1.0
EXPORTING VIDEOS/PHOTOS FROM THE
APP
1. Photos and videos are automatically
saved to your phones gallery upon
hitting the Photo or Video capture
buttons.
a. If this does not happen,
please make sure the app
has permissions to access
your photos.
ADJUSTING THE FLASHLIGHT
1. Scroll up or down on the scroll wheel
located on the borescope cable to
increase or turn down/off the flashlight
LEDs
9 Version 1.0
TROUBLESHOOTING
THE DEVICE WON’T TURN ON
• Charge the device for at least 4 hours
before the first use.
• Make sure the device is securely
connected to the charging source.
OTHER PROBLEMS
• Call our technical support at 770-694-
6921
10 Version 1.0
SPECIFICATIONS
Battery Life
~120 Minutes
Water Resistant
Waterproof rating IP67
Type of Memory
Utilizes phone storage
Viewing Angle
70°
Video Format
.MP4
Record/Streaming
Resolution
720P
Operating
Systems
Android 6 & up
iOS 8 & up
/
