QUAD LOCK 10055530 Operating instructions

Hello! I have reviewed the instructions for the QUAD LOCK Weatherproof Wireless Charger. This document provides information on how to install and use the charger on your motorcycle. It covers topics from attaching the charger head and wiring to managing cable fitment and understanding the LED status indicators.
What is the recommended power input for the USB-A port?

What should I consider when fitting the cable?

What do the LED states indicate?

Wiring Instructions

WEATHERPROOF WIRELESS CHARGER

INSTRUCTIONS

HEAD

Attach Wireless

Charging Head

USB-A PORT

RECOMMENDED 5V/2A

USING CABLE TIES?

We advise against putting the cables

under too much tension. Allow for a little

movement, otherwise you may ﬁnd the

cable being pulled or bumped out of the

socket whilst your bike is in motion.

CABLE CLEARANCE

To ensure the power cable doesn’t interfere

with motorcycle operation (steering,

breaking etc.), push the Wireless Charging

Head down, then turn the handlebars.

NOTE.

The location

of your USB-A

port may dier

from shown

USB-C

POWER

ON/OFF

BUTTON

Tighten

(4Nm)

Cable fitment

50cm,

1.2m

or 1.5m

CABLE

USB-C

USB-A

45°

ERROR MODE

FULL CHARGE

CHARGING

POWER ON

LOW INPUT POWER MODE

<5W (5V/1A)

The phone may reach 100% charge but in some instances

it may take a long time for the cyan light to show.

WIRELESS CHARGER

OVER HEATING

LED states Attaching your phone Detaching your phone