MI-18250A
spray.com
TankJet® 18250A
Tank Cleaning Nozzle
USER GUIDE
GENERAL SAFETY INFORMATION
• Be cautious of any sharp threads
• Do not operate the nozzle (when it’s in the open) outside
the container
• Do not attempt to touch the nozzle during
operation rotation
• Handle all chemicals according to the
corresponding MSDS
• WARNING: DO NOT USE TO SPRAY FLAMMABLE
LIQUIDS –SUCH USE COULD RESULT IN FIRE OR
EXPLOSION CAUSING BODILY INJURY OR DEATH
TECHNICAL SPECIFICATIONS
Specifications
Aplication: Cleaning the inside of containers such as drums, barrels
and tanks
Features: The nozzles will fit through the 2 7/23” (60 mm) diameter
hole. Reactionary force produced by the three flat sprays
rotates the spray head providing 360° coverage. The pres-
sure to the nozzle controls the spray head rotational speed
Temperature: Maximum operating temperature is 360° F (170° C)
Pressure: Maximum operating pressure is 100 psi (7 bar)
Material: 316 stainless steel
Weight: 1.5 lb. (0.68 kg.)
Parts List: PL 18250A
INSTALLATION
• The 18250A nozzle can be installed in any orientation
• Use teflon tape when installing the 18250A
• Screw the nozzle onto a 3/4” NPT pipe to 150 in/lbs.
PARTS LIST
Item Part No. Description
1
CP46951 – 316SS Inlet cap, type 316 stainless steel for
#18250A – 316SS_ _ – 316SS
CP46951 – 316SS Inlet cap, type 316 stainless steel
for #B18250A – 316SS_ _ – 316SS
2 CP46939 – 316HSS
Upper & lower race, type 316 stainless
steel Kolsterized (2 req’d) for
#_18250A_ _ – 316SS_ _ – 316SS
3 46952
Bearing retainer assembly: retainer,
polyphenylene sulde and 3/16“ ball, type
316 stainless steel Kolsterized (2 req’d)
for #_18250A_ _ – 316SS_ _ – 316SS
4 CP46938 – 316SS Body connector, type 316SS stainless steel
5 CP46936 – SSTEF Sleeve, 50% stainless steel lled teon
for #_18250A – 316SS_ _ – 316SS
6 CP46937 – 316SS Retainer, type 316SS stainless steel
7
CP18255 – 21 – SSPV
Body & tip sub-assembly, type 316
stainless steel for #_18250A – 316SS21
– 316SS
CP18255 – 45 – SSPV
Body & tip sub-assembly, type 316
stainless steel for #_18250A – 316SS45
– 316SS
2spray.com | 1.800.95.SPRAY | Intl. Tel: 1.630.665.5000
EC DECLARATION OF INCORPORATION
We, Spraying Systems Co.®
North Avenue and Schmale Road, P.O. Box 7900,
Wheaton, IL 60187-7901
Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000
Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842
www.spray.com
in accordance with the following directive(s):
2006/42/EC The machinery directive
hereby declare that:
Equipment Tank Cleaning Devices
Model number 18250A, 21400A, 23240
is in conformity with the applicable requirements of the following documents:
Ref. no. Title Edition/ Date
EN ISO 4413 Hydraulic fluid power — General rules and safety requirements for systems
and their components 2010
EN 12100 Safety of machinery – General principles for design risk assessment and risk
reduction
2010
BS EN ISO 14121-1 Safety of machinery – Risk assessment Part 1: Principles 2007
ASME- B31.1 ASME Code for Pressure Piping 2020
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above
referenced specifications. The unit complies with all applicable Essential Requirements of the Directives.
Signed by:
Robert J. Adams, P.E.
Director of Engineering-Industrial Division
Spraying Systems Co.
12/7/2020
Wheaton, Illinois, USA
3
spray.com | 1.800.95.SPRAY | Intl. Tel: 1.630.665.5000
North Avenue and Schmale Road. P.O. Box 7900, Wheaton, IL 60187-7901 USA
Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000
Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842
Email: info@spray.com
www.spray.com
MI-TankJet_18250A Rev. 11/21 © 2021 Spraying Systems Co.
/
