2. Comdronic
  3. AC6-HP+ Electronic Manometer
AC6-HP+ Electronic Manometer

Comdronic AC6-HP+ Electronic Manometer User guide

  • Hello! I have reviewed the Comdronic AC6-HP+ Quick-Start Guide and understand that this document provides instructions on how to use the AC6-HP+ Pressure Meter. I am ready to answer questions about its zero datum setting, access to an on-board valve database, menu navigation using directional buttons, and more.
  • How do you switch the AC6 on?
    What is the maximum system pressure?
    How do you set a zero datum?
    How do you enter numerical data?
    How do you switch the AC6 off?
AC6‐HP+Quick‐StartGuide
ConnecttheBLUE connection
tubetothisconnector.
Equalisingvalve.
Presstoaccessthehandset’s
on‐boardvalvedatabase.
Use▲►▼◄buttonsformenu
navigationandtoenternumerical
data– seenotebelow.
Presstocancelanentryorto
returntoapreviousscreen.Also
usetoswitchtheAC6‘OFF’.
Numericentries:usethe▲▼buttonstoincreaseordecreasevalues.Usethe►buttontoaddadigit.Ifadecimalpointisrequired,
pressthe▼buttonwhenthezerodigitisshowing.Toenteranegativenumber,presstheZERO buttonbeforeanynumberisadded.
Securingring.Usethelanyardsupplied
tosuspendtheAC6frompipework(or
similar)whiletakingreadings.
PROTECTFROMFROSTINSTORAGE
PRESSANY BUTTONTOSWITCHTHEAC6‘ON’.
TOTALSYSTEMPRESSURE=20BARMAX.
Presstosetazerodatumbefore
takingameasurement.
MENU
?ZERO
--+ +
ConnecttheRED connection
tubetothisconnector.
Internalstrainersprotectthe
sensor‐unitfromsmalldirtparticles.
Theseareserviceparts.
Note:blockedstrainerswillslow
performanceandreduceaccuracy.
Presstoacceptmenuselections
andscreenentries.
Presstoentermenuscreens.
/