Frost King HC3A Installation guide

Type
Installation guide

Frost King HC3A

The Frost King HC3A is a self-regulating heating cable designed to prevent water pipes from freezing. It is suitable for use on pipes with a diameter of up to 1-1/2 inches and can be installed on both horizontal and vertical pipes, following the instructions provided in the manual that came with the device. The cable is equipped with a built-in thermostat that automatically turns the heating element on and off as needed to maintain the temperature of the pipe above freezing.

Frost King HC3A

The Frost King HC3A is a self-regulating heating cable designed to prevent water pipes from freezing. It is suitable for use on pipes with a diameter of up to 1-1/2 inches and can be installed on both horizontal and vertical pipes, following the instructions provided in the manual that came with the device. The cable is equipped with a built-in thermostat that automatically turns the heating element on and off as needed to maintain the temperature of the pipe above freezing.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Frost King HC3A Installation guide

Type
Installation guide

Frost King HC3A

The Frost King HC3A is a self-regulating heating cable designed to prevent water pipes from freezing. It is suitable for use on pipes with a diameter of up to 1-1/2 inches and can be installed on both horizontal and vertical pipes, following the instructions provided in the manual that came with the device. The cable is equipped with a built-in thermostat that automatically turns the heating element on and off as needed to maintain the temperature of the pipe above freezing.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages