Sunny Health & Fitness SF-B0717 User guide

Brand
Sunny Health & Fitness
Model
SF-B0717
Category
Fitness, gymnastics & weight training
Type
User guide
ELECTRIC SURFACE CYCLE 90
SF-B0717
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions.
Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE
CONTACTED US: [email protected] or 1- 877 - 90SUNNY (877-907-8669).
1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be achieved if the equipment is assembled,
maintained and used properly. It is your responsibility to ensure that all users of the equipment
are informed of all warnings and
precautions.
1. Before starting any exercise program, you should consult your physician to determine if you
have any medical or physical conditions that could put your health and safety at risk, or
prevent you from using the equipment properly. Your physician’s advice is essential if you are
taking medication that affects your heart rate, blood pressure or cholesterol level.
2. Be aware of your body’s s
ignals. Incorrect or excessive exercise can damage your health.
Stop exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, shortness of breath, lightheadedness, dizziness or nauseous feeling. If
you do experience any of these conditions, you should consult your physician before
continuing with your exercise program.
3. Keep children and pets away
from the equipment. The equipment is designed for adult use
only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 4 feet (1.2 M) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/or wear and
tear.
6. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from the
equipment during exercise, discontinue use of the equipment immediately and do not use until
the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid weari
ng loose clothing that may
become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 220 pounds (100 KG).
10.The equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/ or damage to the product or property, proper lifting and moving are
required.
12.Your product is intended for use in c
ool and dry conditions. You should avoid storage in
extreme cold, hot or damp areas as this may lead to corrosion and other related problems.
13.This equipment is designed for indoor and home use only; it is not intended for commercial
use.
2
EXPLODED DRAWING
HARDWARE PACKAGE
#5 M8 4p cs
#5 M8 4pcs
#A Spanner 1pc
#B Wrench 1pc
#C Wrench 1pc
3
PARTS LIST
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following informatio n in order for us to accurately identify the part(s) needed:
The model number (found on cover of manual)
The product name (found o n cover of manual)
The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near
the front of the manual)
Please contact us at support@sunnyhealthfitness.com or 1- 877 - 90SUNNY ( 877-907-8669).
1
Main Frame
1
2
Front Stabilizer
1
3
Rear Stabilizer
1
4
Cap
4
5
Screw
M8
4
6
Crank Cap
2
7
Screw
M8
2
8L
Crank-L
1
8R
Crank-R
1
9
Screw
M6
6
10
Rubber Plate
2
11
Motor
1
12
Nut
2
13L
Pedal-L
1
13R
Pedal-R
1
14
Cover-R
1
15
Screw
M4
8
16
Magnet
1
No. Description Spec. Qty.
17
Plastic Magnet Se at
1
18
Washer
1
19
Screw
M3
7
20
Screw
M3
1
21
Remote Control Rear Cover
1
22
Screw
M2
2
23
Remote Control
1
24
Remote Control Front Cover
1
25
Label
1
26
Remote Control Cable
1
27
Power Cable
1
28
Cover-L
1
29
Control Panel
1
30L
Pedal Strap-L
1
30R
Pedal Strap-R
1
A
Spanner
1
B
Wrench
1
C
Wrench
1
ASSEMBLY INSTRUCT IONS
Attach the Re ar Stabilizer (No. 3) to the Main Frame
(No. 1) using 2 Bolts (No. 5) an d secure with Spanner
(A).
#5 M8 2pcs
#A 1pc
5
2
1
#5 M8 2pcs
#A 1pc
5
3
1
5
STEP 2:
Connect the Left Pedal (No. 13L) and Right Pedal (No.
13R) onto the Le ft Crank (No. 8L) a nd Right Crank (No.
8R).
NOTE: The Left Peda l (No. 13L) and Right Pedal (No.
13R) are marked L fo r Left P edal (No. 13L) and R for
Right Pedal (No. 1 3R). Re move the 2 Nuts (No. 12)
located on the Pedals.
Left Pedal (No. 13L): Align Left Pedal (No. 13L) with the
Left Crank (No. 8L) at 90 d egrees. Insert the pedal into
the crank arm; turn the pedal counter-clockwise as tightly
as you can with your hand. Once screwed in place, use
Wrench to hold the bolt of the pedal then screw 1 Le ft
Nut (No. 12) clockwise
onto
thread end o f the Left Pedal
(No. 13L). Secure with Wrench.
Right Pedal (No. 13R): Align the Right Pedal (No. 13R)
with the Right Crank (No. 8R) at 90 degrees. Insert the
pedal into the crank arm; turn the pedal clockwise as
tightly as you can with your hand. Once screwed in place,
use Wrench to hold the bolt of the pedal then screw 1
Right Nut (
No.12R
) counter-clockwise
onto
thread end of
the Right Pedal (No. 13R). Secure with Wrench.
STEP 3:
Attach the Pedal Straps (No. 30) to the Left Pedal (No.
13L) and Right Pedal (No. 13R).
12L
13L
13R
13L
12R
8R
13R
The assembly is now complete!
6
SAFETY NOTES
ELECTRICAL INFORMATION
Rated Voltage: 110V
Do not stand on cycle. Only use while seated in a chair.
If cycle is tilted over 45 degrees, it will auto stop.
If cycle detects problems during exercise, it will auto stop within 10
seconds.
REMOTE CONTROL FUNCTION KEYS
START/STOP
Starts and stop machine
MODE
Changes display between RPM-TIME-ODO
TIME
Changes the timer in 5 minute intervals
DIRECTION
Changes the direction forward or backward
RPM + -
Increases or decreases RPM in intervals of 5
1. Plug in the power. Turn on the power switch. Cycle beeps and display
shows “-.-.-.-“. It is in standby mode.
2. Press the START/STOP button on the remote control to start the cycle.
Cycle automatically starts on a 5 minute timer. Timer can be set to 5, 10, 15, 20, 25, 30 minutes.
Press Time to set the timer. When timer reaches 0, cycle will auto stop.
Press + - to increase or decrease the RPM in increments of 5. Initial RPM is 30. Maximum RPM
is 90.
Press DIRECTION to change the directi
on forward or backward.
Press MODE to switch the function displayed from RPM to TIME to ODO.
3. Press the START/STOP button to stop the cycle.
NOTE:
After it stops, cycle keeps the last settings. Use the remote control to change the settings.
MODE, TIME, DIRECTION, RPM + - buttons only work when the cycle is pedaling. The buttons do
not work when it is in standby mode.
Version 1.2
OPERATING INSTRUCTIONS
ELECTRICAL INFORMATION
Rated Voltage: 110V
Power switch
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Sunny Health & Fitness SF-B0717 User guide

Brand
Sunny Health & Fitness
Model
SF-B0717
Category
Fitness, gymnastics & weight training
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents