HIT Welding 802269 User manual

Brand
HIT Welding
Model
802269
Category
Welding System
Type
User manual

HIT Welding 802269 is a versatile welding tool that provides precise welding control for various tasks. With a welding amperage output of 20 to 225 amps, it offers ample power for welding different materials. Its dual voltage capability allows for efficient operation on both 115V and 230V power sources, making it adaptable to various job site conditions. The HIT 802269 also features infinite amperage control, enabling fine-tuning of the welding current for optimal results on different metal thicknesses.

HIT Welding 802269 is a versatile welding tool that provides precise welding control for various tasks. With a welding amperage output of 20 to 225 amps, it offers ample power for welding different materials. Its dual voltage capability allows for efficient operation on both 115V and 230V power sources, making it adaptable to various job site conditions. The HIT 802269 also features infinite amperage control, enabling fine-tuning of the welding current for optimal results on different metal thicknesses.

HIT70
ARC Welder
Assembly & Operating Instructions
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time
without prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO
NOT OPERATE THIS PRODUCT!
HAVE QUESTIONS OR PROBLEMS? DO NOT RETURN THIS PRODUCT TO THE
RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com
or call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of
the sales receipt is required.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
201604
HIT70 ARC Welder Assembly & Operating Instructions Manual
2
GENERAL PRODUCT SPECIFICATIONS
SPECIFICATIONS
Amperage Output: 50 (Low), 70 (High)
Two Voltage Settings For Better Heat Control
Primary Input 20 Amps
Open Circuit Volts (Max) 42VAC
Duty Cycle Rating 20% @ 50A
FEATURES:
Advanced Thermal Overload Protection
For Transformer
Includes Welding Cable & Electrode Holder, Grounding Cable
& Earth Clamp, Clipping Hammer/Brush &
Welding Face Shield
This product contains chemicals known to the State of California to cause cancer
and birt
h eff
ects or other reproductive harm.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
When unpacking, check to make sure all parts listed are included. If any parts are missing or broken,
please call Customer Service at 1-888-287-6981.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage of this
product. Before use, read carefully and understand all warnings, cautions, instructions and labels.
Failure to do so could result in serious personal injury, property damage or even death.
IMPORTANT SAFETY RULES
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT.
THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR.
Max – Min
Switch
Power On/Off
Cable/Ground
Clamp
Thermal
Overload
Brush
Face Shield
Electrode Diameter 1/16” , 5/64”
Suggested Electrodes: E6013
Welding Cable
Electrode
Holder
HIT70 ARC Welder Assembly & Operating Instructions Manual
3
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
4
GENERAL PRODUCT INFORMATION
Max – Min
Switch
Cable/Ground
Clamp
Thermal
Overload
Brush
Face Shield
Welding Cable
Electrode
Holder
HIT70 ARC Welder Assembly & Operating Instructions Manual
5
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
6
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
7
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
8
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
9
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
10
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
11
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
12
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
13
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
14
GENERAL PRODUCT INFORMATION
HIT70 ARC Welder Assembly & Operating Instructions Manual
15
GENERAL PRODUCT INFORMATION
Repair Parts List
HIT70 ARC Welder Assembly & Operating Instructions Manual
14
GENERAL PRODUCT INFORMATION
NO. PART NAME
1 1.1.01.01.0061
Case
1
2 2.07.28.211
Thermal Overload indicator
1
3 2.07.80.221
Power Switch
1
4 2.07.80.031
Voltage Selector
1
5 1.1.01.03.0061
Front Panel
1
6 2.05.05.035
Plastic Frame
2
7 1.2.08.01.0034
Electrode Holder and Cable
1
8 1.2.08.02.0046
Ground Cable/Clamp
1
9 2.05.05.201
Cable Holder
3
10 1.1.04.01.1603
Transformer
1
11 1.1.01.04.0042
Lower Panel
1
12 2.07.36.740
Thermostat
1
13 2.03.05.140
Power Cord with Plug
1
14 1.1.01.03.0062
Rear Panel
1
15 2.05.08.115
Handle
1
QTY
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

HIT Welding 802269 User manual

Brand
HIT Welding
Model
802269
Category
Welding System
Type
User manual

HIT Welding 802269 is a versatile welding tool that provides precise welding control for various tasks. With a welding amperage output of 20 to 225 amps, it offers ample power for welding different materials. Its dual voltage capability allows for efficient operation on both 115V and 230V power sources, making it adaptable to various job site conditions. The HIT 802269 also features infinite amperage control, enabling fine-tuning of the welding current for optimal results on different metal thicknesses.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents