Power button functions
a. Press and hold the power On/Off button for a few seconds to turn the device ON or OFF
b. Once the device is on, press and hold the power button for a few seconds to enter into Bluetooth
mode.
c. Short press the power Button to change the colors of the LED lamp.
Bluetooth connection
a. Long press the power button to on the device. The LED indicator will turn on and a sound is
heard confirming the microphone is set into Bluetooth pairing mode.
b. Turn on the Bluetooth on your Smartphone or Tablet and start to search for the Microphone.
Once SY-XK5 appears on your phone or tablet, click on it to pair your device with the
microphone.
c. The microphone will emit a sound, confirming the pairing process has been established.
d. In the case you are asked to enter a password, simply enter ‘0000’ and click ok.
Bluetooth Paring and connection
a. If the Microphone speaker has been connected previously via Bluetooth to any device, it will
connect with the last Bluetooth device automatically once it is turned on.
b. In the case the Microphone has never been connected via Bluetooth before, the unit will enter
into pairing mode. Pair the microphone with your device.
c. Your Microphone can only be connected to one device at a time.
d. At the same time your smartphone or tablet will not be able to connect to your microphone if it
is already paired with another device. You will need to un-pair your device in order to connect
it to the microphone.
Music playback from TF card
Power on the Microphone and insert a TF card (Micro SD) making sure the memory card contains
MP3 files. Make sure to insert the memory card carefully and in the correct position. The music will
start to play automatically.
LED Lamp
a. Turn on the speaker and short press the power button to activate the LED lamp.
b. Short press the power button to change the LED lamp to different colors.
c. Short press the power button six times to activate the LED lamp as to the rhythm of the music.