2. SECO-LARM
  3. SL-1901-JAQ

SECO-LARM SL-1901-JAQ, SL-1901-DAQ Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the SECO-LARM SL-1901-JAQ Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation to
Conduit Drop
Installation to
Conduit Box
Installation to Conduit Box
and Conduit Drop
`
SL-1901-DAQ Strobe Light to Conduit Drop Bracket
SL-1901-JAQ Strobe Light to Conduit Box Bracket
Installation Guide
Overview
Parts List
1x
Drop Bracket (SL-1901-DAQ) or
Box Bracket (SL-1901-JAQ)
Medium Screws (for Conduit Drop
and Conduit Box Installation)
1x
Adapter Plate
Short Screws
1x
Rubber Gasket
Long Screws
1x
Manual
These brackets may be used together or separately to allow for 3 different installation
possibilities for a strobe light: to
either a conduit box or conduit drop separately, or a
conduit box in conjunction with a conduit drop.
ENFORCER Strobe Light to Conduit Mounting Brackets
2 SECO-LARM U.S.A., Inc.
To Conduit Box Only
To Conduit Box and Conduit Drop
Step Two:
Install Strobe Light to Adapter
Plate
(already attached to Conduit
Box/Drop in Step One)
To Conduit Drop Only
Step One:
After installing/assembling conduit
box/
conduit drop, attach adapter plate as
shown below
Conduit Drop
Conduit Drop
Conduit Box
(Install First)
Conduit Box
Oval Unthreaded Hole
Short Screws (Included)
Oval Unthreaded Hole
Oval Unthreaded Hole
Medium Screws (Included)
Adapter Plate (Included)
Adapter Plate (Included)
Short Screws (Included)
Adapter Plate (Included)
Short Screws (Included)
Adapter Plate (Included)
Rubber Gasket (Included)
Note Gasket Orientation
Strobe Light Lens
Long Screws (Included)
Strobe Light Base
(Use Two Larger Holes
Extending Through Base)
Threaded Hole
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO
-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice.
SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 201
5 SECO-LARM U.S.A., Inc. All rights reserved.
This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO
-LARM.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for 1 (one) year from the date of sale to the original customer.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
PICSN4
Phone: (949) 261-2999 | (800) 662-0800
Email: sales@seco-larm.com
MiSL-1901-xAQ_151106.docx
Order Part #:762-118-1%
Sample Installation
/