Roger ME-12 User manual

Roger
Brand
Roger
Model
ME-12
Type
User manual

Roger ME-12

The Roger ME-12 mounting bracket is designed to provide ergonomic access to the MD70 graphic touch panel. It is adjustable, allowing for inclinations of 30º, 45º, or 60º to accommodate different user heights and ensure optimal photo capturing capabilities. Made from powder-coated stainless metal sheet, the ME-12 bracket is durable and sturdy.

Features:

  • Adjustable inclination for ergonomic use
  • Durable powder-coated stainless metal sheet construction
  • Easy installation with pre-drilled holes for wall mounting
  • Cable hole for easy cable management

Use Cases:

  • Access control systems

Roger ME-12

The Roger ME-12 mounting bracket is designed to provide ergonomic access to the MD70 graphic touch panel. It is adjustable, allowing for inclinations of 30º, 45º, or 60º to accommodate different user heights and ensure optimal photo capturing capabilities. Made from powder-coated stainless metal sheet, the ME-12 bracket is durable and sturdy.

Features:

  • Adjustable inclination for ergonomic use
  • Durable powder-coated stainless metal sheet construction
  • Easy installation with pre-drilled holes for wall mounting
  • Cable hole for easy cable management

Use Cases:

  • Access control systems
Roger Access Control System
ME-12 mounting bracket User Manual
Product version: 1.0
Document version: Rev. A
ME-12 User manual.doc 2017-10-11
2/5
1. DESCRIPTION AND SPECIFICATION
ME-12 mounting bracket is dedicated to installation of MD70 graphic touch panel with adjustable
inclination and in certain distance to the wall in order to offer ergonomic access of users to the
device. The positioning of MD70 is particularly beneficial when photos are taken by MD70 as the
inclination enables reliable photo capturing regardless of user height. ME-12 bracket is made of
powder coated stainless metal sheet.
Parameter
Value
Inclination against wall
30º, 45º or 60º
Dimensions HxWxD
220 x 97 x 131.5 mm
Weight
0.88 kg
2. INSTALLATION
ME-12 bracket consists of front panel for MD70 attachment and base for wall mounting. Prior to
installation the bracket must be disassembled. The inclination of front panel (30, 45 or 60º) is
adjusted by selection of holes dedicated to front panel and base assembly (fig. 2).
Fig. 1 Arrangement of wall mounting holes
Rubber spacer
Rubber spacer
Rubber spacer
Rubber spacer
ME-12 User manual.doc 2017-10-11
3/5
Fig. 2 Arrangement of front panel and base assembly holes
Fig. 3 Arrangement of MD70 mounting holes
Mounting bolts
Mounting hole
Mounting hole
Mounting hole
Mounting hole
ME-12 User manual.doc 2017-10-11
4/5
Fig. 4 Arrangement of connection cable
3. ORDERING INFORMATION
Product
Description
ME-12
MD70 mounting bracket
MD70
Graphic touch panel with Mifare Classic/Desfire/ NFC reader
4. PRODUCT HISTORY
Product version
Released
Description
ME-12 v1.0
06/2017
The first commercial version of the product
ME-12 User manual.doc 2017-10-11
5/5
This symbol placed on a product or packaging indicates that the
product should not be disposed of with other wastes as this may
have a negative impact on the environment and health. The user
is obliged to deliver equipment to the designated collection points
of electric and electronic waste. For detailed information on
recycling, contact your local authorities, waste disposal company
or point of purchase. Separate collection and recycling of this type
of waste contributes to the protection of the natural resources
and is safe to health and the environment. Weight of the
equipment is specified in the document.
Contact:
Roger sp. z o.o. sp.k.
82-400 Sztum
Gościszewo 59
Tel.: +48 55 272 0132
Fax: +48 55 272 0133
Tech. support: +48 55 267 0126
E-mail: support@roger.pl
Web: www.roger.pl
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Roger ME-12 User manual

Roger
Brand
Roger
Model
ME-12
Type
User manual

Roger ME-12

The Roger ME-12 mounting bracket is designed to provide ergonomic access to the MD70 graphic touch panel. It is adjustable, allowing for inclinations of 30º, 45º, or 60º to accommodate different user heights and ensure optimal photo capturing capabilities. Made from powder-coated stainless metal sheet, the ME-12 bracket is durable and sturdy.

Features:

  • Adjustable inclination for ergonomic use
  • Durable powder-coated stainless metal sheet construction
  • Easy installation with pre-drilled holes for wall mounting
  • Cable hole for easy cable management

Use Cases:

  • Access control systems
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents