Commercial Electric Y293035 Operating instructions

Installation

Stripping the Speaker Wire

Preparing the Banana Plug

3 4

5 6

Use and Care Guide

Banana Plugs

Select 16AWG to 12AWG speaker wire.

Strip away the ends of the jacket. 0.75-1.00in. .

Unscrew the bottom of the banana plug.

Inserting the wire

Insert one end of the speaker wire into the (black or red) banana plug

Conductor bending

Insert one end of the speaker wire into the (black or red) banana plug

Insert it to the end,make the conductor bend.

Repeat this step with each banana plug.

Preparing for Use Ready for Use

Tighten the bottom of the banana plug.

The bottom is firmly fixed to the conductor.

Ensure the speaker wires are secure in the banana plugs.

Your final assembly should look like this.

Plug banana plugs into the appropriate receptors.

Item #0000 157 572

Model #Y293035

Download PDF