Delta 1977-CZ-DST Specification

Brand: Delta

Model: 1977-CZ-DST

Type: Specification

COLD WATER TAPS

■ Beverage Faucet Collection

■ Single Handle Deck Mount

■ 1 Hole Sink Applications

■ Diamond Seal

Technology

■ Integrated Supply Tubes

■ Air Gap Included

■ Compatible with RO (Reverse Osmosis)

Systems

■ Traditional or Transitional Styles Available

Submitted Model No.: _______________________________________________

Specific Features: __________________________________________________

STANDARD SPECIFICATIONS:

•

9 1/4" (235 mm) high, 5" (127 mm) long, spout

swings 360˚.

•

Single lever handle design.

•

Diamond Seal

Technology.

•

Works with RO systems, filtered water systems, or as

a cold water tap.

•

Laminar water stream with maximum 1.50 gpm @

60 psi, 5.7 L/min @ 414 kPa

•

4" (102 mm) maximum deck thickness (2 3/4"

(70 mm) with air gap).

• Mounting wrench to assist in tightening mounting

nut securely.

• Integrated supply tube with 3/8" compresssion fitting.

• Air gap included with 1/4" tube for RO system and

3/8" tube for drain.

1977-DST▲

55 E. 111th Street, Indianapolis, Indiana 46280

350 South Edgeware Road, St. Thomas, ON N5P 4L1

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue

models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or

www.deltafaucet.com for finish options and product availability.

DSP-K-1977-DST Rev. D

COMPLIES WITH:

•

ASME A112.18.1 / CSA B125.1

•

ASME A112.18.6

Indicates compliance to

ICC/ANSI A117.1

•

Verified compliant with .25% weighted average Pb

content regulations.

6 7/8"

(175 mm)

9 1/4"

(235 mm)

(127 mm)

2 1/2"

(64 mm)

Min. 2 1/2" (64 mm)

Clearance to Back Splash

46"

(1168 mm)

37 1/2"

(953 mm)

2 39/64"

(66 mm)

3/8"

Compression

Fittings

1 1/8"

(29 mm)

▲ Designate proper finish suffix

2 1/8"

(54 mm)

7 53/64"

(199 mm)

38 3/4"

(984 mm)

(102 mm)

2 3/4"

(70 mm)

WARRANTY

•

Lifetime limited warranty on parts (other than

electronic parts and batteries) and finishes:

or, for commercial users, for 5 years from

date of purchase.

•

5 year limited warranty on electronic parts

(other than batteries); or, for commercial

users, for 1 year from the date of purchase.

No warranty is provided on batteries.

Delta 1977-CZ-DST Specification

Delta 1977-CZ-DST Specification

Delta 1977-CZ-DST Specification

Related papers