M-system R7M-EC8C User manual

M-system
Brand
M-system
Model
R7M-EC8C
Type
User manual
R7M-EC8C
P. 1 / 3EM-7803-AH
RELAY CONTACT OUTPUT EXTENSION MODULE, 8 points
(Modbus)
MODEL
R7M-EC8C
INSTRUCTION MANUAL
BEFORE USE ....
Thank you for choosing M-System. Before use, please check
contents of the package you received as outlined below.
If you have any problems or questions with the product,
please contact M-System’s Sales Office or representatives.
■ PACKAGE INCLUDES:
Discrete output extension module ............................... (1)
■ MODEL NO.
Confirm Model No. marking on the product to be exactly
what you ordered.
■ INSTRUCTION MANUAL
This manual describes necessary points of caution when
you use this product, including installation, connection and
basic maintenance procedures.
POINTS OF CAUTION
■ GENERAL PRECAUTIONS
Before you remove the unit or mount it, turn off the power
supply and input signal for safety.
■ ENVIRONMENT
•Indooruse
•Whenheavydustormetalparticlesarepresentintheair,
install the unit inside proper housing with sufficient ven-
tilation.
•Donotinstalltheunitwhereitissubjectedtocontinuous
vibration.Donotsubjecttheunittophysicalimpact.
•Environmentaltemperaturemustbewithin-10to+55°C
(14to131°F)withrelativehumiditywithin30to90%RH
in order to ensure adequate life span and operation.
■ WIRING
•Do not install cables (power supply, input and output)
close to noise sources (relay drive cable, high frequency
line, etc.).
•Do not bind these cables together with those in which
noises are present. Do not install them in the same duct.
■ AND ....
The unit is designed to function as soon as power is sup-
plied,however,awarmupfor10minutesisrequiredforsat-
isfying complete performance described in the data sheet.
M-SYSTEM WARRANTY
M-System warrants such new M-System product which it manufactures to be free from defects in materials and workmanship during the 36-month period following the date that such
product was originally purchased if such product has been used under normal operating conditions and properly maintained, M-System’s sole liability, and purchaser’s exclusive
remedies, under this warranty are, at M-System’s option, the repair, replacement or refund of the purchase price of any M-System product which is defective under the terms of this
warranty. To submit a claim under this warranty, the purchaser must return, at its expense, the defective M-System product to the below address together with a copy of its original
sales invoice.
THIS IS THE ONLY WARRANTY APPLICABLE TO M-SYSTEM PRODUCT AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. M-SYSTEM SHALL HAVE NO LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR
SPECIAL DAMAGES OF ANY KIND WHATSOEVER.
M-System Co., Ltd., 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN, Phone: (06) 6659-8201, Fax: (06) 6659-8510, E-mail: info@m-system.co.jp
R7M-EC8C
P. 2 / 3EM-7803-AH
10
+24V
11
Y0
12
Y1
1
0V
2
COM0
3
COM0
13
Y2
4
COM0
14
Y3
5
COM0
15
Y4
6
COM1
16
Y5
7
COM1
17
Y6
8
COM1
9
COM1
18
Y7
NO.
ID FUNCTION
NO.
ID FUNCTION
1 0V 0V 10 +24V 24VDC
2 COM0 Common0 11 Y0 Output0
3 COM0 Common0 12 Y1 Output1
4 COM0 Common0 13 Y2 Output2
5 COM0 Common0 14 Y3 Output3
6 COM1 Common1 15 Y4 Output4
7 COM1 Common1 16 Y5 Output5
8 COM1 Common1 17 Y6 Output6
9 COM1 Common1 18 Y7 Output7
■ OUTPUT TERMINAL ASSIGNMENT
COMPONENT IDENTIFICATION
0 1 2 3 4 5 6 7
10 11 12 13
2341
15 16 17 18
7896
14
5
Discrete Output Status Indicator LED
Output Terminals
■ DISCRETE OUTPUT STATUS INDICATOR LED
LEDindicatorsshowoutputsignalstatus.
ContactON :LEDON
ContactOFF :LEDOFF
EXTERNAL DIMENSIONS unit: mm (inch)
11.5
(.45)
10 11 12 13
2341
15 16 17 18
78
9
6
14
5
94 (3.70)
30 (1.18)
[5 (.20)]
DIN RAIL
35mm wide
54 (2.13)
17 (.66)
18–M3 SCREW
TERMINALS
for OUTPUT
6 (.24)
3 (.12)5.5 (.22)
50 (1.97)
18.5 (.73)
R7M-EC8C
P. 3 / 3EM-7803-AH
WIRING INSTRUCTIONS
■ SOLDERLESS TERMINAL mm (inch)
Refer to the drawing belowfor recommended ring tongue
terminal size. Spade tongue type is also applicable. Solder-
less terminals with insulation sleeve do not fit. Applicable
wiresize:0.3–0.75mm
2
CONNECTION DIAGRAM
Connect the unit as in the diagram below.
3.2 (.13) dia.
4 min.
(.16)
12 (.47) max.
6 max.
(.24)
3 (.12) max.
■ Output Connection Examples
4 Points per Common
10
14
1
2
5
11
+24V
24V DC
Y0
0V
+–
Y3
COM0
COM0
+
18
6
9
15
Y4
Y7
COM1
COM1
+
8 Points per Common
10
14
1
2
5
11
+24V
24V DC
Y0
0V
+–
Y3
15
Y4
18
Y7
COM0
COM0
6
9
COM1
COM1
+–
10
5
1
2
6
4
7
13
8
9
14
12
15
11
16
17
18
COM0
COM0
COM0
Y0
Y1
Y2
Y3
COM0
COM1
COM1
COM1
0V
+24V
Y4
Y5
Y6
Y7
COM1
3
+
+
+
–
–
–
EXTENSION CONNECTOR
CONNECTING THE EXTENSION MODULE
1) Removetheextensionconnectorcoverlocatedattheside
of the basic module.
2) Connecttheextensionmodule.
3) Mount the combined module on a DIN rail.
  • Page 1 1
  • Page 2 2
  • Page 3 3

M-system R7M-EC8C User manual

M-system
Brand
M-system
Model
R7M-EC8C
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents