Panasonic CS-UW12GKE Owner's manual

Brand: Panasonic

Model: CS-UW12GKE

Category: Split-system air conditioners

Type: Owner's manual

POWER TIMER

Operating Instructions

Air Conditioner

Indoor Unit Outdoor Unit

CS-UW9GKE CU-UW9GKE

CS-UW12GKE CU-UW12GKE

F566242

ENGLISH 2 ~ 7

Before operating the unit,

read these operating

instructions thoroughly

and keep them for future

reference.

ESPAÑOL 8 ~ 13

Antes de utilizar la unidad,

sírvase leer atentamente

estas instrucciones

de funcionamiento y

conservarlas como futuro

elemento de consulta.

Manufactured by:

PANASONIC HOME APPLIANCES AIR-

CONDITIONING (GUANGZHOU) CO., LTD.

ZHONGCUN, PANYU DISTRICT, GUANGZHOU CITY,

GUANGDONG PROVINCE, CHINA.

(Guangzhou) Co., Ltd. All rights

reserved. Unauthorized copying and

distribution is a violation of law.

ITALIANO 14 ~ 19

Prima di utilizzare l’unità

si prega di leggere

attentamente le istruzioni

e di conservare questo

opuscolo per potervi fare

riferimento in futuro.

NEDERLANDS 20 ~ 25

Lees voor u het

apparaat gebruikt deze

gebruiksinstructies grondig

na en bewaar ze voor

toekomstig gebruik.

Indoor Unit

During Installation

• Do not install the unit in a potentially

explosive atmosphere.

• Ensure that the drainage pipe is

connected properly. Otherwise, leakage

may occur.

During Operation

• Do not wash the unit with water, benzene,

thinner or scouring powder.

• Do not use for other purposes such as

preservation of food.

• Do not use any combustible equipment in

front of the airow outlet.

• Do not expose directly to cold air for a

long period.

• Aerate the room regularly.

SAFETY PRECAUTIONS

To prevent personal injury, injury to others, or property damage, please observe the following.

Incorrect operation due to failure to follow instructions may cause harm or damage, the seriousness of which is classied as below:

Warning

This sign warns of death or serious

injury.

Caution

This sign warns of injury or damage

to property.

The instructions to be followed are classied by the following symbols:

This symbol denotes an action that is

PROHIBITED.

These symbols denote actions

that are COMPULSORY.

DEFINITION

Warning

Caution

Power Supply

During Operation

• Do not pull the cord to disconnect the

plug.

• Switch off the power supply and unplug

before cleaning or servicing.

• Turn off the power supply and unplug if

the unit is not used for a long period of

time.

• This air conditioner is equipped with a

built-in surge protective device.

However, in order to further protect your

air conditioner from being damaged by

abnormally strong lightning activity, you

may want to disconnect it from the power

supply. Do not touch the air conditioner

during lightning, it may cause electric

shock.

Remote Control

During Operation

• Do not use rechargeable

(Ni-Cd) batteries.

• Do not allow infants and

small children to play with

the remote control to prevent

them from accidentally

swallowing the batteries.

• Remove the batteries if the

unit is not going to be used

for a long period of time.

• New batteries of the same

type must be inserted

following the polarity stated

to prevent malfunction of the

remote control.

Air inlet

Air outlet

Air inlet

Air outlet

Power Supply

During Installation

• This equipment must be earthed and

installed with ELCB. Otherwise, it may

cause electrical shock or re in case of

malfunction.

During Operation

• Do not share the same power outlet with

other equipment.

• Do not modify power cords.

• Do not use extension cords.

• Do not operate with wet hands.

• Do not operate or stop the unit by

inserting or pulling out the power plug.

• Insert the power plug properly.

• Use the specied supply cord.

• If the supply cord is damaged, it must be

replaced by the manufacturer, its service

agent or similarly qualied persons in

order to avoid a hazard.

• Dust on the electric power plug should

be periodically wiped with a dry cloth.

• In case of emergency or abnormal

conditions (burning, unusual odour, etc),

turn off the power supply and unplug.

Outdoor Unit

During Installation

• Ensure that the drainage pipe is

connected properly. Otherwise, leakage

may occur.

During Operation

• Do not sit or place anything on the

outdoor unit.

• Do not insert your ngers or other

objects into the outdoor unit.

• After long periods of use, make sure the

installation rack is not damaged.

Indoor Unit

During Installation

• Do not install, remove and

reinstall the unit by yourself;

improper installation will

cause leakage, electric shock

or re. Please consult an

authorized dealer or specialist

for the installation work.

During Operation

• Do not insert your ngers or

other objects into the indoor

unit.

• Do not attempt to repair the

unit by yourself.

• Do not place anything on the

indoor unit.

F566242_EN1.indd 2 2009-1-13 13:36:52

ENGLISH

English English English English English English

REGULATORY INFORMATION

The appliance is not intended for use by young children or the inrm person without

supervision. Young children should be supervised to ensure that they do not play with the

appliance.

ENVIRONMENTAL REQUIREMENTS

Battery Disposal

The batteries must be recycled or disposed of properly.

INFORMATION FOR USERS ON COLLECTION

AND DISPOSAL OF OLD EQUIPMENT AND

USED BATTERIES

These symbols on the products, packaging, and/or accompanying

documents mean that used electrical and electronic products and batteries

should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used

batteries, please take them to applicable collection points, in accordance with

your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save

valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products and

batteries, please contact your local municipality, your waste disposal service

or the point of sale where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact

your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard

these items, please contact your local authorities or dealer and ask for the

correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case

it complies with the requirement set by the Directive for the chemical involved.

Use this air conditioner under the following temperature range.

Temperature (°C)

Indoor Outdoor

*DBT: Dry bulb temperature

*WBT: Wet bulb temperature

*DBT *WBT *DBT *WBT

COOLING

Maximum

32 23 43 26

Minimum

21 15 21 15

HEATING

Maximum

27 – 24 18

Minimum

20 – -5 -6

NOTICE: • This model is not suitable for 24 hours non-stopping operation in heating mode below -5°C. When

the outdoor temperature is below -5°C and you use this model out of above conditions, the outdoor

unit might be frozen up and stop operation for protection control.

OPERATION CONDITION

Replacement or installation of power plugs shall be performed by authorized/

qualied personnel only. The wires in this mains lead are coloured in accordance

with the following code:

Terminals

wires

live

neutral

colours

(GB Standard)

brown

blue

red

black

green-yellow

earth

green/yellow

Wiring colour may vary depending on a country wiring code’s standard.

TABLE OF CONTENTS

Note:

The illustrations in this manual are for

explanation purposes only and may differ

from the actual unit. It is subjected to change

without notice for future improvement.

Thank you for purchasing

Panasonic Air Conditioner

SAFETY PRECAUTIONS

REGULATORY INFORMATION

HOW TO OPERATE

4~5

CARE & CLEANING

TROUBLESHOOTING

PRODUCT SPECIFICATION

QUICK GUIDE

Back cover

F566242_EN1.indd 3 2009-1-13 13:36:53

AUTO

HEAT

COOL

DRY

FAN

SPEED

AIR

SWING

PO WER TI MER

• In heat mode, it takes a while for the unit to warm up. The

power indicator blinks during this operation.

• Recommended temperature: 20°C ~ 24°C

HOW TO OPERATE

Notes:

• Use a screwdriver to short the two Reset Terminals on the

back of remote control to restore the remote control's default

setting.

• Remove the batteries if the unit is not to be used for a long

period.

REMOTE CONTROL TRANSMITTER

AUTO MODE - FOR YOUR CONVENIENCE

HEAT MODE - TO ENJOY WARM AIR

• Make sure it is not

obstructed.

• Certain uorescent lights

may interfere with signal

transmission. Please

consult your nearest

dealer.

Maximum distances : 8m

INDICATOR

RECEIVER

Insert AAA or

R03 batteries

Pull out

Inserting the batteries

• Unit selects the operation mode according to the room

temperature.

• Once auto mode is selected, the unit will operate at the

standard setting temperature.

• To change the standard setting temperature, press for

“

” or for “

”.

Room

temperature

Operation

mode

Standard

setting

temperature

(+2°C)

(–2°C)

23°C & above Cool 25°C 27°C 23°C

Below 23°C Dry 22°C 24°C 20°C

Below 20°C Heat 21°C 23°C 19°C

• Recommended temperature: 26°C ~ 28°C

COOL MODE - TO ENJOY COOL AIR

• During soft dry operation, the indoor fan operates at low

fan speed to give a very gentle cooling operation.

• Recommended temperature: 1°C ~ 2°C lower than room

temperature.

● Forheat,coolanddrymodes,therangeof

temperature can be selected from 16°C ~ 30°C.

DRY MODE - TO DEHUMIDIFY THE

ENVIRONMENT

Select Turn on Adjust

temperature

REMOTE CONTROL PREPARATION

MODE OPERATION

AUTO HEAT

DRY COOL

• The retention period of batteries might be affected

to be shorter because of the using times of the

remote control, even less than one year.

LCD display

F566242_EN1.indd 4 2009-1-13 13:36:54

ENGLISH

AUTO

HEAT

COOL

DRY

FAN

SPEED

AIR

SWING

TO SELECT FAN SPEED

• There are 3 fan speeds, as well

as automatic*.

* For automatic fan speed,

the speed of the indoor fan

is automatically adjusted

according to the operation.

• To ventilate air in the room.

• There are 5 selections in addition to automatic

vertical airow direction.

TO ADJUST AIRFLOW

DIRECTION

Hints

■ Temperature setting of 1°C higher in cool mode or

2°C lower in heat mode than the desired temperature

performs a 10% power saving.

■ To reduce power consumption during cool mode, close

the curtains to prevent the sunlight and heat from

coming in.

FEATURE OPERATION

● Toturnofftheairconditioner,press .

• The timer indicator of the indoor unit will light up during the timer

operation.

• When the ON-TIMER is set, operation will start 15 minutes before

the actual set time in cooling operation and 30 minutes in heating

operation.

• If you press operation button during the timer setting

operation, timer setting will be cancelled.

• When a power failure occurs, the timer setting will be cancelled.

Once power is resumed, reset the timer.

Select ON/OFF timer and Set

the ON/OFF time hourly.

TocancelONorOFFtimer,press .

• When you want the air conditioner to turn ON or OFF automatically.

TO SET THE TIMER

TIMER SETTING

Conrm

the setting.

• If automatic vertical airow direction has

been set, the louver swings up and down

automatically.

• Please do not adjust the vertical airow

direction louver manually.

• Horizontal airow direction louver could

be only adjusted manually. Be careful not

to insert your ngers into the unit to avoid

injuring by cross-ow fan.

F566242_EN1.indd 5 2009-1-13 13:36:55

AirQualityAirQuality

TIMER

POWER

Hints

■ Clean the lter regularly for best performance and to reduce

power consumption.

■ Please consult your nearest dealer for seasonal inspection.

Note

■ If chemical cloth is used to wipe the unit, instruction for the

cloth should be followed.

Raise and pull to

remove. Wash

and dry.

FRONT PANEL

Remove

Vacuum, wash and dry.

• It is recommended to clean air lters once every 2 weeks.

• Wash/rinse the lters gently with water to avoid damage to the

lter surface.

• Dry the lters thoroughly under the shade, away from re or

direct sunlight.

• Replace any damaged lter.

Part no.: CS-UW12GKE:CWD001168

CS-UW9GKE: CWD001110

AIR FILTER

Wipe the unit

gently with a

soft, dry cloth.

• Do not use benzene, thinner or scouring powder.

• Use only soap ( pH7) or neutral household detergent.

• Do not use water hotter than 40°C.

WASHING INSTRUCTIONS

CARE & CLEANING

If the remote control is misplaced or malfunctioned.

Action Mode

Press once Automatic

Press and hold until you hear one

beep sound, then release

Force Cooling

• To turn off, press the AUTO OFF/ ON button again.

Toswitchofftheremotecontrolsignalreceivingsound,

press the button and hold for approximate 10 seconds

untildoublebeepsoundisheard,thenrelease.

• Repeat the above step if you want to switch on the

signal receiving sound.

Toswitchofftheautorestartcontrol,pressthebutton

and hold for approximate 15 seconds until triple beep

soundisheard,thenrelease.

• To switch on the auto restart control, repeat the above step.

AUTO OFF/ON BUTTON

AIRFLOW DIRECTION

LOUVER

AIRFLOW DIRECTION

LOUVER

Switch off the power supply before cleaning

INDOOR UNIT

Remove

CS-UW12GKE CS-UW9GKE

F566242_EN1.indd 6 2009-1-13 13:36:57

ENGLISH

Symptom Cause

Mist emerges from indoor unit.

■

Condensation effect due to cooling process.

Waterowingsoundduringoperations.

■

Refrigerant ow inside the unit.

The room has a peculiar odour.

■

This may due to damp smell emitted by the wall, carpet, furniture or clothing.

Indoor fan stops occasionally during

automatic fan speed setting.

■

This helps to remove the surrounding odours.

Operation is delayed a few minutes after

restart.

■

The delay is a protection to the unit’s compressor.

Outdoor unit emits water/steam.

■

Condensation or evaporation occurs on pipes.

The unit operates automatically when

power is resumed after a power failure.

■

It is the Auto Restart function of the unit. Operation will be restarted automatically under the

previous operation mode and airow direction when power is resumed as the operation is

not stopped by remote control .

■

To cancel the Auto Restart Control, please refer to page 6.

Power indicator blinks during operation

and the indoor fan is stopped.

■

The unit is in defrost mode, and the melted frost is drained from the outdoor unit.

Indoor fan stops occasionally during

heating operation.

■

To avoid unintended cooling effect.

TURN OFF POWER SUPPLY and CALL Authorized Distributor under the following conditions:

• Abnormal noise during operation.

• Water/foreign particles have entered the Remote Control.

• Water leaks from Indoor unit.

• Circuit breaker switches off frequently.

• Power cord becomes unnaturally warm.

• Switches or buttons are not functioning properly.

• The timer indicator blinks and the unit can not be operated.

NON SERVICEABLE CRITERIAS

TROUBLESHOOTING

• Activate heat mode for 2~3 hours to thoroughly dry the unit.

• Turn off the power supply and unplug.

• Remove the remote control batteries.

FOR EXTENDED NON-USE

• Checking of remote control batteries.

• No obstruction at air inlet and air outlet vents.

• After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents:

Cooling: ≥ 8°C

Heating: ≥ 14°C

SEASONAL INSPECTION AFTER EXTENDED

NON-USE

The following symptoms do not indicate malfunction.

Symptom Check

Heating/Cooling operation is not working

efciently.

■

Set the temperature correctly.

■

Close all doors and windows.

■

Clean or replace the air lters.

■

Clear any obstruction at the air inlet and air outlet vents.

Noisy during operation.

■

Check if the unit has been installed at an incline.

■

Close the front panel properly.

Remote control does not work.

■

Insert the batteries correctly.

■

Replace weak batteries.

The unit does not work.

■

Check if the circuit breaker is tripped.

■

Check if timers have been set.

Check the following before calling for servicing.

F566242_EN1.indd 7 2009-1-13 13:36:57

Page is loading ...

PRODUCT SPECIFICATION

Indoor Unit

Outdoor Unit

Test conditions

1. Cooling: Indoor Dry Bulb Temp. (°C) 27 Outdoor Dry Bulb Temp. (°C) 35

Wet Bulb Temp. (°C) 19 Wet Bulb Temp. (°C) 24

Heating: Indoor Dry Bulb Temp. (°C) 20 Outdoor Dry Bulb Temp. (°C) 7

Wet Bulb Temp. (°C)12 (MAX) Wet Bulb Temp. (°C) 6

2. Standard piping length: 7.5m(Includes Indoor Unit piping length).

Model

CS-UW9GKE

CU-UW9GKE

CS-UW�2GKEW�2GKE

CU-UW�2GKEW�2GKE

COOL HEAT

Single, 230V, 50Hz

Power/Current

[W]

8�0 780

�080 �060

[A] 3.80 3.70

5.00 4.80

Refrigerant

[kg]

R4�0A

0.80

R4�0A

0.98

Cooling Capacity

[kW]

2.50

3.30

Heating Capacity

[kW] 2.70

3.70

Noise Level

JIS C 96�2 [<70 dB(A)]

[dB(A)]

39 39

Conditions �m Distance

Max. cooling

48 49

49 50

Sound power level [dB(A)]

50 50

6� 62

62 63

Air Circulation

/min.] �0.3 �0.3

9.0 9.2

Product Weight

[kg]

7.5

9.0

Dimensions (H × W × D)

[mm]

250 × 770 × 205

280 × 799 × �83

530 × 650 × 230

540 × 780 × 289

F566242_EN1.indd 26 2009-1-13 13:36:58

Page is loading ...

AUTO

HEAT

COOL

DRY

FAN

SPEED

AIR

SWING

Select the desired mode.

Seleccione el modo deseado.

Selezionare la modalità desiderata.

Selecteer de gewenste stand.

AUTO HEAT

DRY COOL

Start/stop the operation.

Inicie/detenga el funcionamiento.

Avviare/arrestare l’apparecchio.

Start/stop het apparaat.

Fordetailexplanation,pleaserefertopages4~5.

Paraunaexplicacióndetallada,porfavorlealaspáginas10y11.

Perinformazionidettagliate,andareapagina16e17.

Voorgedetailleerdeuitleg,refereeralstublieftaandepagina’s22~23.

Select fan speed.

Seleccione la velocidad del

ventilador.

Selezionare la velocità della ventola.

Selecteer de ventilatorsnelheid.

QUICK GUIDE/GUÍA RÁPIDA/

GUIDA RAPIDA/SNELLE GIDS

Adjusttheairowdirection

louver.

Ajuste la persiana de

direccióndelujodeaire.

Regolare l’aletta della

direzionedelussod’aria.

Stel de jaloezieën voor de

luchtstroomrichting af.

Select the desired temperature.

Seleccione la temperature

deseada.

Selezionare la temperatura

desiderata.

Stel de gewenste temperatuur in.

Printed in China

F1006-04

F566242

Pursuant to at the directive 2004/�08/EC, article 9(2)

Panasonic Testing Centre

Panasonic Service Europe, a division of

Panasonic Marketing Europe GmbH

Winsbergring �5, 22525 Hamburg, F.R. Germany

F566242_EN1.indd 28 2009-1-13 13:37:03

Panasonic CS-UW12GKE Owner's manual

Brand: Panasonic

Model: CS-UW12GKE

Category: Split-system air conditioners

Type: Owner's manual

Download PDF

report

in other languages

italiano: Panasonic CS-UW12GKE Manuale del proprietario
español: Panasonic CS-UW12GKE El manual del propietario
Nederlands: Panasonic CS-UW12GKE de handleiding

Panasonic CS-UW12GKE Owner's manual

Panasonic CS-UW12GKE Owner's manual

in other languages

Related papers

Other documents