2. Atlona
  3. AT-IR-CS-RX

Atlona AT-IR-CS-RX User manual

  • Hello! I am an AI chatbot trained to assist you with the Atlona AT-IR-CS-RX User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Atlona IR Receiver Cable for
POE Extenders
AT-IR-CS-RX
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Signal (S)
Ground ( )
Power (P)
AT-UHD-EX-70C-TX
AT-UHD-EX-70C-RX
AT-IR-CS-TX
Emitter
AT-IR-CS-RX
Receiver
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
RS-232
RX
TX
IR IN
S
IR OUT
S
-
+
CAT5e/6/7 OUT
HDMI IN
FW
DC 48V IN
LINK
POWER
AT-UHD-EX-70C-TX
FW
LINK
POWER
AT-UHD-EX-70C-RX
RS-232
RX
TX
IR IN
P
S
IR OUT
S
CAT5e/6/7 IN
HDMI OUT
Introduction
The Atlona IR Receiver Cable for POE Extenders provides greater distance and better IR rejection
from sources such as: plasma, CFL, and LCD panels.
Features and Specifications
Mounting and Placement
Captive Screw
Connection Diagram
• Frequency range from 30 to 60 kHz
• Distance up to 10m w/no interference on axis
*Operational distance may vary due to interference from IR radiating sources
Ex. Sunlight, CFL, LCD, or Plasma displays
• Reception Angle: +/- 45° off axis
• Dimensions (H x W x D) 10 x 62 x 10 (mm)
0.39 x 2.44 x 0.39 (inch)
• Red status LED indicator for quick verification the IR receiver is picking up the IR remote’s signal
• Power Requirement: 12V DC, 20mA -- Maximum current output: 100mA -- Signal level: 10.8V
To mount the receiver, peel the back off and affix it to a
clean surface.
The receiver may be placed anywhere, as long as it is in direct
line of sight of the remote.
* Designed for select Atlona products
** For warranty information see http://www.atlona.com/marketing/img/limited_warranty/
/