Vertical SBX 320 IP Quick Reference Manual

Vertical
Brand
Vertical
Model
SBX 320 IP
Category
Telephones
Type
Quick Reference Manual

Vertical SBX 320 IP is a digital phone with a range of features to enhance your communication experience. It features an LCD display to keep you informed about your calls and messages, with flexible pre-programmed buttons for quick access to frequently used functions. The speakerphone allows for hands-free conversations, while the headphone jack provides privacy when needed. The phone also supports speed dialing, call transfer, conferencing, and voice mail, making it a versatile tool for both personal and professional use.

Vertical SBX 320 IP is a digital phone with a range of features to enhance your communication experience. It features an LCD display to keep you informed about your calls and messages, with flexible pre-programmed buttons for quick access to frequently used functions. The speakerphone allows for hands-free conversations, while the headphone jack provides privacy when needed. The phone also supports speed dialing, call transfer, conferencing, and voice mail, making it a versatile tool for both personal and professional use.

Voice Mail Features
Phone Buttons & Features
Issue 2.0 - September 2008
Button/Feature Used to...
1 Headphone Jack speak to a caller when using a headset instead of holding the
handset.
2Handset answer or place an internal or external call.
3 LCD Display display phone status information, dialing directories, and test
message information.
4Speaker hear the other party during a call without using the handset or
headset (hands-free mode).
5MSG LED indicate new voice mail messages are waiting.
6 Pre-Programmed/
Flexible Buttons
(8)
access external line calls, pre-assigned features, or user
defined feature code assignments.
Note: These include Flex Button 1: DND and Flex Button 2:
CALL BACK.
7 TRANS/PGM Button set up a conference call or transfer a call. It is also used to
access User Programming features.
8 SPEED Button access speed dialing, saved number redial, and last number
redial. Button is also used to access flexible button program-
ming.
9 VOLUME Button decrease (-) or increase (+) the volume of the speaker or
handset while on a call. This button is also used to scroll up
and down in the User Programming menus.
10 Microphone (MIC) used to speak to a caller when in speaker mode.
11 HOLD/SAVE Button put a call on hold or save the current User Programming
setting.
12 Dialpad dial phone numbers and make entries on the display.
13 SPEAKER Button toggle between speaker (or headset) mode and handset
mode. You can also use this button to exit any menu screen.
Note: The button LED is lit red when the Speakerphone
mode is active.
Quick Reference Guide
8-Button
Digital Phone
for SBX 320 IP Systems
2
1
4
5
6
8
9
10
11
12
13
3
7
See back page for descriptions.
Basic Call Features
Voice Mail Features
+
This feature requires specific pre-programming.
Contact your System Administrator for details.
Make
a Call
1. Pick up the handset, or press SPEAKER.
2. Dial a station (internal) or phone number (external).
Note: When dialing an external number, you may be required
to enter an authorization, account, and/or access code.
3. Hang up the handset or press SPEAKER to end the conversation.
Answer
a Call
When the phone is ringing:
Lift the handset or press SPEAKER, then press the flashing green
line (Flex) button.
Call
Last
Number
Dialed
1. Lift the handset or press SPEAKER.
2. Enter 552.
OR
Press SPEED, then press 6.
3. Press the HOLD/SAVE to dial the number.
Put a
Call
on Hold
While on a call:
1. Press HOLD/SAVE to place the current call on hold.
2. Press the flashing red line (Flex) button to retrieve the call.
Transfer
a Call
While on a call:
1. Press TRANS/PGM to put the current call on hold.
2. Dial the destination target (station or hunt group).
Wait for the destination target to answer.
3. Announce to the destination target who is calling, then hang
up to complete the (screened) transfer.
OR
While the destination target phone is ringing:
Hang up to complete the (unscreened) transfer without
announcing the caller to the destination.
Note: You can press TRANS/PGM to reconnect to the caller,
as needed.
Set Up a
Conference
Call
+
1. Use the basic steps for placing a call to make the first call in
the conference.
2. Press the CONF to put the current call on hold while you add
another participant.
3. Dial the next participant.
• Repeat steps 2 and 3 to add more participants (up to the
maximum allowed by your system).
4. Press the CONF
twice to connect all of the participants.
Mute a Call
+
During a conversation:
Press
MUTE to prevent other party from hearing anything from
your end of the conversation.
Use 2.5mm
Headset Jack
1. Press TRANS/PGM, then one of the following:
• 171 to enable the setting.
• 75 to toggle between the speaker and the headset.
• 76 to select whether to have calls ring to the speaker,
headset, or both.
2. Press HOLD/SAVE to store the setting.
Set/Change
Your Password
1. Dial TRANS/PGM, then enter 31 to set your password.
Note: To change your password press TRANS/PGM, then
enter 32.
2. Use the dialpad to enter a password (3 to 5 digits).
3. Press [#], and listen for a confirmation tone.
Record Your
Voice Mail
Greeting
1. Press TRANS/PGM.
2. Enter 61, then press #.
At the prompt:
3. Begin recording your greeting.
4. Press HOLD/SAVE or SPEAKER to end and save the recording.
• A confirmation tone sounds.
Check
Messages from
Your Office
Phone
1. Press CALL BACK.
At the prompt:
2. Enter your password, then # to play the first message.
3. Follow the prompts to listen to (and manage) your messages
(see below).
Check
Messages
from
Outside
the Office
+
1. Call the main office number.
When you hear the Auto Attendant greeting:
2. Press the appropriate access code.
+
At the prompt:
3. Enter your station number.
4. Enter your password, then press #.
5. Follow the prompts to listen to (and manage) your messages
(see below).
Listen to
&
Manage
Messages
1. Dial into Voice Mail using either of the methods shown above
(that is, from inside or from outside the system).
• New messages will automatically be played first, then any
saved messages.
At the prompt:
2. Do one of the following:
• Press #1 to delete the current message.
• Press #2 to play the next message.
• Press the #3 to play the message again.
• Press #5 to reply to the current message (see below).
• Press #6 to forward the current message (see below).
Reply to a
Message
While listening to a message:
1. Press #5 to dial the voice mailbox of the station that left
the message.
At the prompt:
2. Record your reply.
Forward a
Message
While listening to a message:
Press #6, then enter the destination voice mailbox to which
you want to forward the message.
Note: You will be prompted to add a comment.
Once forwarded, the message will be removed
from your mailbox.
Set Cell Phone
Notification
1. Press Trans/PGM.
2. Enter 68, then press 1 (to turn on notification).
3. Press
HOLD/SAVE to store the setting, then press TRANS/PGM,
again.
4. Enter 69, then the number at which you want to be notified.
5. Press HOLD/SAVE to store the setting.
  • Page 1 1
  • Page 2 2

Vertical SBX 320 IP Quick Reference Manual

Vertical
Brand
Vertical
Model
SBX 320 IP
Category
Telephones
Type
Quick Reference Manual

Vertical SBX 320 IP is a digital phone with a range of features to enhance your communication experience. It features an LCD display to keep you informed about your calls and messages, with flexible pre-programmed buttons for quick access to frequently used functions. The speakerphone allows for hands-free conversations, while the headphone jack provides privacy when needed. The phone also supports speed dialing, call transfer, conferencing, and voice mail, making it a versatile tool for both personal and professional use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents