Foxconn Bloodrage GTI User manual

Bloodrage Motherboard

User’s Manual

Statement:

This manual is the intellectual property of Foxconn, Inc. Although the information

in this manual may be changed or modied at any time, Foxconn does not obligate

itself to inform the user of these changes.

Trademark:

All trademarks are the property of their respective owners.

Version:

User’s Manual V1.1 for Bloodrage motherboard.

Symbol description:

Caution: refers to important information that can help you to use motherboard

better, and tells you how to avoid problems.

Warning: indicating a potential risk of hardware damage or physical injury may

exist.

WEEE:

The use of this symbol indicates that this product may not be treated as household

waste. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could otherwise

be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local city ofce, your

household waste disposal service or the shop where you purchased this product.

More information:

If you want more information about our products, please visit Foxconn’s

website: http://www.foxconnchannel.com

C

A

U

T

I

O

N

!

W

A

R

N

I

N

G

!

All trade names are registered trademarks of respective manufacturers listed.

All images are for reference only, please refer to the physical motherboard for specic features.

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard Bloodrage

is in conformity with

(reference to the specication under which conformity is declared in

accordance with 89/336 EEC-EMC Directive)

■ EN 55022: 1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology

equipment

■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits for harmonic current emissions

(equipment input current <= 16A per phase)

■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits of voltage uctuations and icker in low

voltage supply systems for equipment with rated current <=

16A

■ EN 55024/A2:2003 Information technology equipment-Immunity characteristics

limits and methods of measurement

Signature : Place / Date : TAIPEI/2009

Printed Name : James Liang

Declaration of conformity

Trade Name: FOXCONN

Model Name: Bloodrage

Responsible Party: PCE Industry Inc.

Address: 458 E. Lambert Rd.

Fullerton, CA 92835

Telephone: 714-738-8868

Facsimile: 714-738-8838

Equipment Classication: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions : (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Tested to comply with FCC standards.

Signature : Date : 2009

Installation Precautions

Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certied fans in order to avoid damage

to the motherboard and CPU due to high temperature. Never turn on the

computer if the CPU Heatsink is not properly installed.

■ We cannot guarantee that your system can operate normally when over-

clocked. Stable operation at overclocked speeds depends on the overclock-

ing capabilities of all devices

■ When connecting USB, 1394a or S/PDIF cables to the internal connectors

on the motherboard, make sure their pinouts are matching with the connec-

tors on the motherboard. Incorrect connections might damage the mother-

board.

■ When handling the motherboard, avoid touching any metal leads or connec-

tors.

■ If there is a PCI Express x16 graphics card installed in your system, we

recommend using a 24-pin ATX power supply to get the best performance.

■ Before turning on the power, please make sure the power supply AC input

voltage setting has been congured to the local standard.

■ To prevent damage to the motherboard, do not allow screws to come in contact

with the motherboard circuit or its components. Also, make sure there are no

leftover screws or metal components placed on the motherboard or within the

computer casing.

■ If you are uncertain about any installation steps or have a problem related to

the use of the product, please consult a certied computer technician.

C

A

U

T

I

O

N

!

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that ows between two objects at different electrical potentials. Normally it

comes out as a spark which will quickly damage your electronic equipment.

Please wear an electrostatic discharge (ESD) wrist strap when handling

components such as a motherboard, CPU or memory.

■ Ensure that the DC power supply is turned off before installing or removing

CPU, memory, expansion cards or other peripherals. It is recommended to

unplug the AC power cord from the power supply outlet. Failure to unplug

the power supply cord may result in serious damage to your system.

W

A

R

N

I

N

G

!

TABLE OF CONTENTS

Chapter 1 Product Introduction

Package List ..................................................................................................2

Product Specications ...................................................................................3

Layout ............................................................................................................5

Back Panel Connectors .................................................................................6

Chapter 2 Hardware Install

Install the CPU and CPU Cooler ...................................................................9

Install the Memory .......................................................................................12

Install an Expansion Card............................................................................14

Install other Internal Connectors..................................................................16

Illustration of the Optional Accessory ..........................................................21

Jumpers .......................................................................................................24

Onboard Button ...........................................................................................26

Onboard LED...............................................................................................26

Onboard Debug LED ...................................................................................27

Chapter 3 BIOS Setup

Enter BIOS Setup ........................................................................................29

Main Menu ...................................................................................................29

Standard CMOS Features ...........................................................................31

Advanced BIOS Features ............................................................................33

Advanced Chipset Features ........................................................................35

Integrated Peripherals .................................................................................36

Power Management Setup ..........................................................................40

PnP/PCI Congurations...............................................................................43

PC Health Status .........................................................................................44

Quantum BIOS ...........................................................................................46

Board Information ........................................................................................55

Load Optimized Defaults .............................................................................56

Set Supervisor Password ............................................................................56

Set User Password ......................................................................................56

Save & Exit Setup........................................................................................56

Exit Without Saving .....................................................................................56

Chapter 4 CD Instruction

Utility CD Introduction ..................................................................................58

AEGIS PANEL

Main Panel .............................................................................................61

HW Monitor ............................................................................................62

Overclocking...........................................................................................64

QF OC Panel ..........................................................................................64

OC Gear .................................................................................................65

Conguration ..........................................................................................65

FOX LiveUpdate

Local Update ..........................................................................................

66

Online Update ........................................................................................68

Congure ...............................................................................................71

About & Help ..........................................................................................73

FOX LOGO ..................................................................................................74

FOX DMI ......................................................................................................75

Chapter 5 RAID Conguration

RAID Conguration Introduction ..................................................................78

Intel

®

Matrix Storage Manager .....................................................................80

Create a RAID Driver Diskette.....................................................................81

BIOS Conguration......................................................................................83

Create RAID in BIOS ...................................................................................83

Install a New Windows XP .........................................................................107

Existing Windows XP with RAID built as data storage .............................. 111

Appendix

ATI

®

CrossFireX

TM

Technology .................................................................. 115

NVIDIA

®

SLI

TM

Technology ..........................................................................117

Technical Support :

Website :

http://www.foxconnchannel.com

Support Website :

http://www.foxconnsupport.com

Worldwide online contact Support :

http://www.foxconnchannel.com/support/online.aspx

CPU, Memory, VGA Compatibility Supporting Website :

http://www.foxconnchannel.com/product/Motherboards/compatibility.aspx

Support

Thank you for buying Bloodrage, a Foxconn Quantum Force series

motherboard. Quantum Force products are Foxconn's high end

enthusiast products engineered to maximize computing power,

providing all you need for break-through performance.

With advanced overclocking capabilities and a range of connectivity

features for today's multi-media computing requirements, Bloodrage

enables you to unleash more power from your computer.

This chapter includes the following information:

■ Package List

■ Product Specications

■ Layout

■ Back Panel Connectors

2

1

Package List

Check your product package for the following items:

Before your purchase, if any of the above items is damaged or missing, please contact

your retailer. Accessories are not in the warranty, only the motherboard is.

C

A

U

T

I

O

N

!

Motherboard Foxconn Bloodrage motherboard

I/O modules 1 X USB 2.0 x 2 ports and 1 x 1394a module

Cables 1 X Ultra DMA cable

1 X SAS cable

3 X SATA Signal cables

2 X SATA Power and Signal cables right angle

Accessory I/O Shield

Water Block

SONAR X-Fi Card

Extreme Cooling Tube

Thermal Peripheral Bag

Application CD Foxconn motherboard support CD

Documentation User’s Manual

Quick Installation Guide

Registration Card

CREATIVE Invite Card

3

1

1-1 Product Specications

CPU Support LGA1366 Intel

®

CPU:

Core

TM

i7 and Core

TM

i7 Extreme Series processors

Supports Intel

®

Hyper-Threading Technology

QPI Up to 6.4GT/s

Chipset North Bridge: Intel

®

X58 chipset

South Bridge: Intel

®

ICH10R

Memory 3 x 240-pin DDR3 DIMM sockets

Supports up to 12GB of system memory

Triple channel DDR3 1800(oc)/1600(oc)/1333/1066/800MHz

(oc*: Overclocking)

* The memory controller is integrated into the Core

TM

i7 CPU, overclocking

might vary from CPU to CPU. Intel ofcially only supports DDR3 1333

Audio SONAR X-Fi Xtreme Sound Card - 7.1 channel HD Audio with EAX4.0 &

CMSS 3D support

LAN 2 x Realtek 8111C Gigabit LAN with Teaming support for 2Gb LAN

Expansion Slots 4 x PCI Express x16 slots (2 x PCIe x 16 mode or 4 x PCIe x 8 mode) with

ATI CrossFireX

TM

and NVIDIA

SLI

TM

support

1 x PCI Express x1 slot

1 x PCI slot

Onboard Serial ATA 6 x SATA connectors

300MB/s data transfer rate

Supports hot plug and NCQ (Native Command Queuing )

Supports RAID 0, RAID 1, RAID 5, RAID 0+1

Supports Intel

®

Matrix Storage Technology

2 x SAS/SATA channels by Marvell 88SE6320

300MB/s data transfer rate

Supports hot plug and NCQ (Native Command Queuing )

Supports RAID 0, RAID 1

Supports SAS

Supports SATA

USB Supports 12 USB 2.0 ports (8 rear panel ports, 2 onboard USB connectors

providing 4 extra ports)

Supports USB 2.0 protocol up to 480Mb/s

Supports hot plug

Internal Connectors 1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x Floppy disk drive connector

1 x Front panel connector

1 x 1394a connector

1 x Speaker connector

1 x HDA_DH connector

1 x VFD connector

2 x SAS_SATA connectors (Controlled by Marvell 88SE6320)

4

1

1 x CPU fan header (4-pin)

1 x System fan header (3-pin)

2 x Power fan headers (3-pin)(FAN1, FAN2)

1 x IDE connector (Controlled by JMicron JMB363)

6 x SATA connectors (Controlled by ICH10R)

2 x USB 2.0 connectors (Supporting 4 x USB devices)

Back Panel 1 x PS/2 Keyboard port

Connectors 1 x Coaxial S/PDIF out connector

8 x USB 2.0 ports

1 x 1394a port

2 x RJ-45 LAN ports

1 x Clear CMOS button

2 x External SATA ports (Controlled by JMicron JMB363)

Hardware Monitor System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU/System overheating shutdown

CPU/System fan speed control

Onboard 1394a Supports hot plug

Supports 400Mb/s transmission rate

Supports 2 independent 1394a devices

PCI Express x16 PCI-E1_16X and PCI-E2_16X support 8GB/s (16GB/s concurrent)

bandwidth

PCI-E1_8X and PCI-E2_8X support 2GB/s (4GB/s concurrent) bandwidth

Low power consumption and power management features

PCI Express x1 Supports 500MB/s (1GB/s concurrent) bandwidth

Low power consumption and power management features

Green Function Supports ACPI (Advanced Conguration and Power Interface)

Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4

(suspend to disk), and S5 (soft - off)

Bundled Software AEGIS PANEL

FOX LiveUpdate

FOX LOGO

FOX DMI

Operating System Supports for Microsoft

®

Windows

®

Vista/XP

Form Factor ATX Form Factor, 12 inches x 9.6 inches (30.5cm x 24.4cm)

This motherboard does not support Windows

®

2000.

C

A

U

T

I

O

N

!

5

1

1-2 Layout

Note : The above motherboard layout is for reference only, please refer to the

physical motherboard for detail.

1. 8-pin ATX 12V Power Connector

2. System Fan Header

3. HDA_DH Header

4. PCI Express x1 Slot

5. PCI Express x16 Slots

6. PCI Slot

7. VBAT_DISCHARGE Jumper

8. Floppy Connector

9. 1394a Connector

10. Front USB Connectors

11. FAN1 Header

12. SAS_SATA Connectors

13. Front Panel Connector

14. Debug LED

15. Power on Button

16. Reset Button

17. SATA Connectors

18. BIOS ROM 2

19. BIOS ROM 1

20. IDE Connector

21. BIOS_Select Jumper

22. FAN2 Header

23. Speaker Connector

24. VFD Connector

25. 24-pin ATX Power Connector

26. Force_Reset Button

27. Button_En Jumper

28. DDR3 DIMM Slots

29. South Bridge: Intel® ICH10R

30. CPU Fan Header

31. LGA1366 CPU Socket

32. North Bridge: Intel® X58 Chipset

13

20 22

31

11

25

7

8

1

2

9

16 18

32

28

26

23

29

30

34

6 5

10

12

15

17

27

19 21

24

14

6

1

1-3 Back Panel Connectors

1. PS/2 Keyboard Port

Use the lower port (purple) to connect a PS/2 keyboard.

2. USB Ports

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as an

USB keyboard/mouse, USB printer, USB ash drive and etc.

3. Clear CMOS Button

Onboard Clear CMOS button is located directly on the motherboard PCB, so you can easily clear

CMOS after failed overclocking attempts.

4. Coaxial S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital coaxial

audio. Before using this feature, ensure that your audio system provides a coaxial digital audio in

connector.

■ Make sure the power supply is turned off before pressing the CLR_CMOS button to

clear CMOS.

■ Push down the CLR_CMOS button and hold it there for a couple of seconds to clear

the CMOS completely, then release.

C

A

U

T

I

O

N

!

External SATA

Ports

USB Ports

LAN Ports

PS/2 Keyboard Port

Coaxial

S/PDIF Out

1394a Port

4

1 7

2

6 8

Audio Ports

Line Out

Microphone

Subwoofer

Rear Speaker

Side Speaker

Line In

3

5

USB Ports

Clear CMOS

Button

7

1

5. 1394a Port

This port is used to connect a 1394a device.

6. External SATA Port

To connect external SATA device(s) to your system by expanding the internal SATA port(s) to the

chassis back panel. External SATA device shall provide power by its own.

7. RJ-45 LAN Port

Each Gigabit Ethernet LAN port provides Internet connection at up to 1Gb/s data rate.

Both Gigabit Ethernet LAN ports can be combined in teaming mode to support connection speeds

up to 2Gb/s!

8. Audio Ports (SONAR X-Fi Card)

For the denition of each audio port, please refer to the table below :

Note: The SONAR X-Fi card is in the package, you can connect it to the back panel.

Port 2-channel 4-channel 5.1-channel 7.1-channel

Blue Line In Line In Line In Line In

Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink Microphone In Microphone In Microphone In Microphone In

Orange - - Center/Subwoofer Out Center/Subwoofer Out

Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out

Grey - - - Side Speaker Out

LAN Type

Left: Active Right: Link

Status Description Status Description

1000M

Off No Link Off No Link

Green

Blinking

Data

Activity

Off 10 Mb/s Connection

Green 100 Mb/s Connection

Orange 1000 Mb/s Connection

Active

LED

Link

LED

This chapter introduces the hardware installation process,

including the installation of the CPU, memory, power supply,

slots, pin headers and the mounting of jumpers. Caution should

be exercised during the installation of these modules. Please

refer to the motherboard layout prior to any installation and read

the contents in this chapter carefully.

This chapter includes the following information :

■ Install the CPU and CPU Cooler

■ Install the Memory

■ Install an Expansion Card

■ Install other Internal Connectors

■ Illustration of the Optional Accessory

■ Jumpers

■ Onboard Button

■ Onboard LED

■ Onboard Debug LED

Please visit the following website for further details on supported CPUs,

Memory and VGAs for your motherboard :

http://www.foxconnchannel.com/product/Motherboards/compatibility.aspx

9

2

2-1 Install the CPU and CPU Cooler

Install the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

LGA1366 CPU Socket

Alignment Key

Pin_1 Corner of the CPU Socket

LGA1366 CPU

Notch

Pin_1 triangle marking of CPU

Read the following guidelines before you begin to install the CPU :

■ Make sure that the motherboard supports the CPU.

■ Always turn off the computer and unplug the power cord from the power supply before

installing the CPU to prevent hardware damage.

■ Unlock and open the CPU socket carefuly.

■ Remove the socket protection cap.

■ Locate the Pin_1 of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or

you may locate the notches on both sides of the CPU and alignment keys on the CPU

socket.)

■ Close and lock the CPU socket carefuly.

■ Check if your heatsink has a thermal pad or thermal grease preapplied. If yes make

sure to remove possible plastic protections from the bottom of the Heatsink before

you install it. If no, apply an even and thin layer of thermal grease on the surface of

the CPU.

■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating

and damage of the CPU may occur.

■ Install and fasten the CPU Heatsink.

■ Connect the Heatsinks dan to the CPU fan connector.

■ After the rst boot up we recommend entering the BIOS by hitting the "DEL" key and

loading the setup/optimized defaults.

■ Apply an even and thin layer of thermal grease on the surface of the CPU.

■ Remember to always check if your system works properly and stable with the default

conguration before voiding your warranty by altering the system conguration.

C

A

U

T

I

O

N

!

10

2

Follow the steps to install the CPU onto the CPU socket :

2. Lift the metal cover on the CPU

socket.

5. When CPU is properly seated,

replace the metal cover and push the

CPU socket lever back to its locked

position.

4. Check pin one marking (triangle)

with the pin one corner of the CPU

socket, align the CPU notches with

the socket alignment keys and gently

put the CPU onto the socket.

Before installing the CPU, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the CPU.

C

A

U

T

I

O

N

!

3. Remove protective socket cover.

1. Release the CPU socket lever.

Lift up the socket cover with only vertical motion.

C

A

U

T

I

O

N

!

11

2

Install the CPU Cooler

Follow the steps below to correctly install the CPU cooler on the motherboard. The Foxconn

QuantumForce BloodRage comes equipped with socket 1366 and socket 775 mounting holes to

support current Heatsinks, waterblocks, phase change coolers and DI/LN2 pots without the need

for modications or upgrade kits.

1. Apply and spread an even thermal

grease on the surface of CPU.

2. Place the four bolts of the CPU

cooler to the holes of the motherboard,

push them straight down from the top,

and the bolts will be fastened on the

motherboard. That's it.

3. Check the solder side of the

motherboard, the push pin should be

xed as depicted in the picture.

3

2

1

4. Attach the 4-wire CPU cooler

connector to the CPU fan socket on

the motherboard .

Release bolts of CPU cooler from

motherboard :

1. Turning the push pin (bolt)

along with the direction of arrow

(counterclockwise).

2. Pull the push pin straight up.

3. Turning push pin clockwise to its

default position.

Socket 775 Push-Pin Heatsinks like the Intel 775 stock Heatsinks will NOT t properly

since the 1366 CPU socket is slightly higher than the 775 CPU socket!

W

A

R

N

I

N

G

!

12

2

2-2 Install the Memory

Triple Channel Memory Conguration

This motherboard provides three DDR3 memory sockets and supports Triple Channel Technology.

When memory is installed, the BIOS will automatically check the memory in your system.

The combinations of DIMM modules are :

DIMM1 DIMM2 DIMM3

Triple Channel DS/SS DS/SS DS/SS

Dual Channel DS/SS DS/SS -

Dual Channel DS/SS - DS/SS

Dual Channel - DS/SS DS/SS

Single Channel DS/SS - -

Single Channel - DS/SS -

Single Channel - - DS/SS

(DS : Double Side, SS : Single Side, - : No Memory)

It is recommended that memory of the same capacity, brand, speed, and chips be

used and please select dual channel rst to achieve optimum performance.

C

A

U

T

I

O

N

!

Read the following guidelines before you begin to install the memory :

■ Make sure that the motherboard supports the memory. It is recommended that memory

of the same capacity, brand, speed, and chips be used.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing the memory to prevent hardware damage.

■ Memory modules have a foolproof design. A memory module can be installed in only

one direction. If you are unable to insert the memory, switch the direction.

C

A

U

T

I

O

N

!

■ Use caution when removing the CPU cooler because the thermal grease may stick it

to the CPU. If the Heatsink is stuck slightly twist it left and right until you can remove

it. Be patient and do not use a lot of force.

■ We can not guarantee that any of fans can work normally, including the Intel stock

775 fan. You should conrm that the interface bewteen the fan and the CPU is in good

status.

C

A

U

T

I

O

N

!

13

2

Installing a Memory

If you take a look at front side of memory module, it has asymmetric pin counts on both sides

separated by a notch in the middle, so it can only t in one direction. Follow the steps below to

correctly install your memory modules into the sockets.

Step 1:

Spread the clips at both ends of the memory socket. Place

the memory module onto the socket, then put your ngers

on top edge of the module, and push it down rmly and

seat it vertically into the memory socket.

Step 2:

The clips at both ends of the socket will snap into place

when the memory module is securely inserted.

Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module. Be sure

to install DDR3 DIMMs on this motherboard.

C

A

U

T

I

O

N

!

144-Pin

96-Pin

Notch

Page is loading ...

Foxconn Bloodrage GTI User manual

This manual is also suitable for

Foxconn Bloodrage GTI User manual

Related papers

Other documents