Guardian Warning Flag Line Operating instructions

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com

Replacement Warning

Flag Line

Part #: 15231

Materials: heavy-duty nylon.

Length: 100’.

Minimum tensile strength: 500 lbs.

Flags spaced every 2½’.

For use in combination with

Guardian Fall Protection Single

Stanchion (part # 15225), Goose

Single Stanchion (part # 15227),

or other compatible warning

line post, as determined by the

jobsite Competent Person.

UPC-A Code: 672421152318

Compliant with all OSHA 1910 and

OSHA 1926 Subpart M regulations

when used as a component of

a complete warning line system.

Replacement Warning Flag Line is

suitable for the following application:

Fall Prevention: Replacement Warning Flag Line may be used as a component of Fall

Prevention systems ONLY. Fall Prevention Systems are placed around the leading edges of

any and all fall hazards to prevent a worker from going over an edge, and may be used in

substitute of Fall Protection or safety netting systems. Installation requirements for Fall

Prevention Systems set forth in product instruction manuals MUST be adhered to. Personal

Fall Arrest, Work Positioning, Climbing, Rescue, and any other systems must NEVER be

connected to Fall Prevention Systems.

WARNING

Use of equipment in unintended applications

may result in serious injury or death.

85297 (Rev. A)