Anthro USB Sync Kit Assembly Instructions

Brand: Anthro

Model: USB Sync Kit

Type: Assembly Instructions

WELCOME

Hello! Thank you for choosing Anthro.

These instructions describe the

installation of Anthro's USB Sync Kit.

If you have any questions or if we can

help you in any way, please contact

Anthro at 800.325.3841.

PARTS LIST

Before beginning this assembly, please take a moment to

review the parts list below to verify that your shipment

is complete. The Tablet Charging Cart and devices are not

included with this item.

Product Quantity Part Number

01 10-port USB Hub w/Power Adapter and 1 400-5438-00A

one USB connector for laptop

02 Data Cables 10

4-foot 30-pin to USB 400-5458-00

1-meter Lightning to USB 400-5469-00

03 Laptop Data cord 1 400-5438-00B

04 AC power cord 1 400-5438-00C

Anthro Corporation

| 10450 SW Manhasset Dr. | Tualatin, OR 97062

Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: [email protected] | anthro.com

Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409

ASSEMBLY INSTRUCTIONS

USB Sync Kit

for Anthro Tablet Charging Carts and Cabinets

Shown with 40-unit Tablet Charging Cart, not included.

Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!

CONGRATULATIONS! YOUR USB SYNC KIT INSTALLATION IS COMPLETE!

*300-5565-00*

300-5565-00

Rev B, March 2013

Warranty:

The USB Sync Kit has a one-year warranty

against manufacturing defects.

Notices:

Technology Furniture is a trademark of Anthro

Corporation. Anthro reserves the right to

modify the design and speciﬁcations

without prior notice.

STEP 1 - CONNECT

 Verify that your iPads are fully charged. Without a full

charge, devices will not sync.

 Connect the hub to the power on the cart or cabinet. [A]

 Connect your powered-up laptop to the hub using the

cord that came with the kit. [B]

 Connect your devices to the hub, either [C] at the IT Area

(by unplugging the cords from the power adapter and

plugging them into the hub) or [D] at the User Area (by

disconnecting the charge cord from device and plugging

in the cords that came with the kit).

 Connect the cart or cabinet to the power in the room.

STEP 2 - TURN IT OFF

 Turn off the power switch on the cart or cabinet.

STEP 3 - TURN IT ON

 Turn on the power switch on the cart or cabinet. Restoring power to your

device prompts it to check for updates.

Anthro USB Sync Kit Assembly Instructions

Anthro USB Sync Kit Assembly Instructions

Anthro USB Sync Kit Assembly Instructions

Related papers

Other documents