2
WARRANTY
YEAR
INSTALLATION MANUAL
FEATURES
• 200mm (8-Inch)
• Integrated Low Profile Subwoofer with Power Amplifier
• Upright Design for Utilities & RV's
• Simple Installation Behind Seats, On Panels and Cargo Area
• Easy Connection from High Level Speaker Wires or
Low Level RCA
• Full Featured Wired Controller
8” (200mm) COMPACT UPRIGHT
AMPLIFIED SUBWOOFER
XT1408A
INCLUDED
- Remote controller: Adjusts volume, gain, frequency & phase
- Installation hardware
SPECIFICATIONS
GENERAL
- Cabinet: High density compound resin
- Mounting: Metal brackets (pair)
- Mounting Position: Behind seats, on panels, cargo areas
- Weight: Approx 3.5 kg (including accessories)
- Dimensions: 250 (W) x 265 (H) x 118 (D) mm
INTEGRATED SUBWOOFER
- Speaker: High compliance, rolled edge
- Cone Diameter: 200mm (8-inch)
- Max Power: 250 Watts
- Voice Coil: Heat Resistant Ø35mm
- Magnet: 16 oz (440g) Strontium
- Frequency: 37 - 200Hz
2XWSXW,PSHGDQFH
POWER AMPLIFIER
- Input: High (speaker wires) or low level (RCA)
,QSXW/HYHODW0D[*DLQ5&$P9P9N
6SHDNHU/LQH99N
- RMS Power Output: 125 watts @ 14.4V 80Hz 2
- Maximum Output: 250 watts
- Sensitivity: 102dB
- Control: Wired remote controller
- Control Features: Frequency (50 ~ 125 Hz) gain and phase
- Power Source: 14.4V DC (10.8 ~ 15.6V)
- Current: 8A Max
- Grounding: Negative
CROSSOVER FREQUENCY
CONTINUOUSLY VARIABLE
FULL-RANGE SPEAKER
The subwoofer
Speaker
Pow er am plier
RCA cord
(Not included)
Connect directly to a power supply terminal from the fuse box
which can provide a constant current level of more than 10A.
Deck,etc
Red
White
For ground
RCA preout
System remote control input cord (blue) supplies switching power
to unit. Wire to the remote output line of your source unit.
Romote Control
(SUB GAIN)
TO +12V
System remote
control output
Grey/Black and Grey
White/Black and White
8
7
6
10A
CONNECTIONS
Wiring Example 1
(Speaker Line System)
Wiring Example 2
(RCA Input System)
CONTROLS AND THEIR USE
1. Power indicator. Lights up when power is on.
2. Gain control. To set the desired gain level.
3. Frequency control. Turn to adjust the frequency.
2.
Car stereo
Speaker line system
Connect directly to a power supply terminal from the fuse box
which can provide a constant current level of more than 10A.
10A
Connect to the REM control line.
For ground
Connect rmly to a metal part of
the car body.Improper grounding
will restrict the performance of this unit.
Speaker
Remote Control
(SUB GAIN)
TO +12V
8
6
7
Set to desired bass setting (continuously variable
from 50Hz to 125Hz)
4. Phase switch. To select the correct phase.
Mounting direction
HOW TO INSTALL
Attaching cable clamps
How to install the remote control
Please install rmly to vehicle body.
8 h2PCS
h2PCS
zPARTS INCLUDED
Φ 10mm×Φ 6mm× 1mm
R
L
× 2
× 4
× 8
× 4
× 2
× 1
× 1
× 1
× 1
(B A4× 8mm)
1
2
2
1
3
3
4
4
1
2
3
4
5
9
5
8
8
h2PCS
Double sided tape
With glue stick
(P A4× 20mm)
(B A3× 8mm)
Suggestion of Subwoofer Placement
3.
XT1408A
/