Bauknecht ETI 6645 IN Program Chart

Bauknecht
Brand
Bauknecht
Model
ETI 6645 IN
Type
Program Chart

Bauknecht ETI 6645 IN offers a range of features for precise cooking and safety. Its four induction cooking zones allow you to boil water rapidly with the Fast boil function and adjust heat settings from 1 to 9 for each zone. A residual heat indicator shows when the cooking zones are still hot after use. The child safety lock prevents accidental activation, and the timer function enables you to program cooking times for each zone.

Bauknecht ETI 6645 IN offers a range of features for precise cooking and safety. Its four induction cooking zones allow you to boil water rapidly with the Fast boil function and adjust heat settings from 1 to 9 for each zone. A residual heat indicator shows when the cooking zones are still hot after use. The child safety lock prevents accidental activation, and the timer function enables you to program cooking times for each zone.

ETI 6645 PRODUCT DESCRIPTION SHEET
ES FR DE NL PT GR GB SK PL CZ HU FI NO SE DK IT RU RO BG
5019 419 01104
HOB DIMENSIONS (mm)
1.
Rear left round induction cooking zone
Ø 145 mm
2.
Front left round induction cooking zone
Ø 210 mm
3.
Rear right round induction cooking zone
Ø 210 mm
4.
Front right round induction cooking zone
Ø 145 mm
5.
Display
Important:
To avoid permanently damaging the vitroceramic
hob, do not use:
- pots with bottoms that are not perfectly flat.
- Metal pots with enamelled bottom.
Any aesthetic defects (scratches, marks, etc.) must
be reported at the time of installation.
TYPE: PLEAN 230 V~/400 V 3N ~ 50 Hz 6.0 kW
TYPE: PLEAN 230 V ~ 50 Hz 6.0 kW (for UK only)
USING THE HOB
IMPORTANT:
The hob's safety features include an automatic switch-off function. Prolonged use of the same heat setting
causes switching off of the cooking zone (e.g. after approx. 1 hour at maximum heat setting, the cooking zone switches off).
A
On/Off
D
Fast boil
B
Heat setting increase
E
Child safety
C
Heat setting decrease
F
Timer
CAUTION:
Before switching on the hob, deactivate the CHILD SAFETY DEVICE by pressing button
“E”
.
To switch the hob on, keep button
“A”
pressed for approx. 2 seconds. The 4 cooking zone displays show
“0”
.
If none of the cooking zones is activated within 10 seconds, the hob switches off automatically as a safety
precaution.
Press one of the buttons
“B”
or
“C”
corresponding to the cooking zone you intend using.
Select the required heat setting with buttons
“B”
or
“C”
. Heat settings go from 1 to 9.
IMPORTANT:
After setting the heat level, the selected cooking zone is deactivated within 60 seconds if no
recipient is placed on it.
To change the heat setting of a plate, press buttons
“B”
or
“C”
.
Press buttons
“B”
and
“C”
at the same time to cancel the setting; if the plate is on, it is switched off.
Press button
“A”
to switch off all activated plates.
The
CHILD SAFETY
function is switched on by holding down button
“E”
until a dot lights up above the
function button. This function locks all the buttons except the hob On/Off button
“A”
. The function remains on
even after the hob is switched off and on again and can be deactivated by pressing button
“E”
again until the dot
above the function button goes off.
The
TIMER
function (if available) can be used to program the operation of a cooking zone.
To programme the timer for a given cooking zone, first select the desired cooking zone using one of the buttons
“B”
. To activate the function, press the button with the clock symbol
“F”
, then reselect button
“B”
of the
activated zone. A dot lights up next to the display of the selected cooking zone. Within 6 seconds, set the cooking
time using buttons
“F” +/-
(1-99 min). At the end of the set cooking time, an acoustic signal sounds. If a cooking
zone has been programmed to operate with the timer, it is switched off and the indicator dot switches off too.
The
TIMER
function can only be used to activate one cooking zone.
The
FAST BOIL
function sets a heating level higher than max. to bring water rapidly to the boil.
To activate the function, select a cooking zone with button
“B”
or direct press button
“D”
.
A
P
appears on the display.
H
RESIDUAL HEAT INDICATOR.
After the cooking zone is switched off, the residual heat indicator
“H”
remains on or flashes, alternating with
“0”
until the hob temperature falls to an acceptable safety level.
  • Page 1 1
  • Page 2 2

Bauknecht ETI 6645 IN Program Chart

Bauknecht
Brand
Bauknecht
Model
ETI 6645 IN
Type
Program Chart

Bauknecht ETI 6645 IN offers a range of features for precise cooking and safety. Its four induction cooking zones allow you to boil water rapidly with the Fast boil function and adjust heat settings from 1 to 9 for each zone. A residual heat indicator shows when the cooking zones are still hot after use. The child safety lock prevents accidental activation, and the timer function enables you to program cooking times for each zone.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents