Macally MHUBSTAND Owner's manual
- Category
- Signal cables
- Type
- Owner's manual
MHUBSTAND
Package content
• MHUBSTAND
• USB-C to USB-A cable
• USB-C to USB-C cable
Plug one end of the USB-C cables into the
back of the laptop stand and the other end
into your laptop
For larger laptops, make sure you pull the
front stopper out from the bottom of the
laptop stand and insert it into the slot
located at the front of the stand.
CHANGING THE RGB LIGHTING
• Press and hold: on/off
• Press and release: cycle through the 10
different RGB effects
Hardware basics
Installation
USB-C to
USB-A cable
USB-C to
USB-C cable
Laptop stopper
(located under the front end of the stand)
Laptop stopper slot
RGB trim
Front Laptop Stopper
USB-C power port RGB control button
4 Port USB HUB
Copyright © 2020 Macally Peripherals
If you encounter any difficulty in the operation of this product after reading the manual, please feel free
to contact us. You can reach us by phone at (909) 230-6888 from 8:30 AM to 5:30 PM Monday through
Friday (Pacific Standard Time) or by email at [email protected]. We will be happy to answer
your questions and help you in any way we can.
FAQ & help - https://help.macally.com/help
Manual and driver download - https://us.macally.com/pages/drivers-and-downloads
-
1
Macally MHUBSTAND Owner's manual
- Category
- Signal cables
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI