Trixie Aurora User manual

Trixie
Brand
Trixie
Model
Aurora
Type
User manual

Trixie Aurora is a 151 cm cat tree with a carpeted surface for your feline friend to enjoy. It features a sturdy bottom plate, a platform, a cozy cave, and multiple lying plates with edges for added comfort and stability.

The cat tree is easy to assemble, with clear instructions and all necessary hardware included. Simply screw the posts into the underside of the cave, connect the platform to the posts, and then screw the posts under the platform and attach the bottom plate. Next, connect the remaining posts to the lying plates and screw them into the upper platform. Finally, tighten all the posts to ensure stability.

Trixie Aurora is a 151 cm cat tree with a carpeted surface for your feline friend to enjoy. It features a sturdy bottom plate, a platform, a cozy cave, and multiple lying plates with edges for added comfort and stability.

The cat tree is easy to assemble, with clear instructions and all necessary hardware included. Simply screw the posts into the underside of the cave, connect the platform to the posts, and then screw the posts under the platform and attach the bottom plate. Next, connect the remaining posts to the lying plates and screw them into the upper platform. Finally, tighten all the posts to ensure stability.

Aufbauanleitung / Assembling Instruction & Stückliste / Parts list
Art Nr. /
Item No.
44991
Pos. Nr. /
Pos. No.
Anzahl /
Quantity
Art.Nr.
Item No.
Pos. A
Bodenplatte
Bottom plate
1 44991-10
Pos. B
Plattform
Platform
1 44991-11
Kratzbaum "Aurora"
151 cm
mit Teppichbezug
Beschreibung / Description
14.02.11
TRIXIE Heimtierbedarf GmbH & Co. KG
70265
Platform
Pos. C
Höhle
Cave
1 44991-12
Pos. D
Liegeplatte mit Rand, oben
Lying plate with edge, top
1 rot/red
1 beige
44991-13
44991-14
Pos. E
Stamm mit Teppich, 34 cm
Post with carpet, 34 cm
3 44991-30
Pos. F
Stamm mit Teppich, 27 cm
Post with carpet, 27 cm
3 44991-31
Pos. G
Stamm, 50 cm
1
4499-32
1. Schrauben Sie die Stämme (E) an
die Unterseite der Höhle (C).
1. Screw the posts (E) with the underside
of the cave (C).
2. Verbinden Sie die Plattform A
mit den Stämmen.
2. Connect the platform A to the
posts.
3. Danach schrauben Sie die Stämme (F)
unter die Plattform und…
3. Thereafter screw the posts (F) under the
platform and …
4. …befestigen anschließend die Bodenplatte.
4. …connect the bottom plate.
Pos. G
Stamm, 50 cm
Post, 50 cm
1
4499-32
Pos. H
Stamm, 25 cm
Post, 25 cm
1 4499-33
Pos. I
Schlossschraube, 10 × 50 mm
Carriage bolt, 10 × 50 mm
5
Pos. J
Gewindeschraube, 10 × 45 mm
Thread bolt, 10 × 45 mm
5
Pos. K
Gewindeschraube, 10 × 70 mm
Thread bolt, 10 × 70 mm
5
Alle Stämme noch einmal
festziehen. Fertig!
Tighten all posts once more.
Finished!
4499-60
5. Verbinden Sie jetzt die Stämme
(G / H) mit den beiden Liegeplatten (D)
und schrauben Sie diese an die oberste
Platte.
5. Now c
onnect the posts (G / H ) with the
two lying plates (D) and screw them at
the upper platform.
Ziehen Sie die Stämme während des Zusammenbaus nicht zu fest, um noch Anpassungen zu ermöglichen.
Do not over-tighten the posts during assembling. Leave a little bit room for later adjustment.
Tip
Tipp
Immer zuerst das kurze Ende der Gewindeschraube in die Platte drehen und danach das lange in den Stamm.
Always screw the short end of the thread bolt into the boards and after that the long end into the post.
Dieser Artikel sollte von einer erwachsenen Person zusammengebaut werden.
This product should be assembled by an adult.
14.02.11
TRIXIE Heimtierbedarf GmbH & Co. KG
70265
  • Page 1 1

Trixie Aurora User manual

Trixie
Brand
Trixie
Model
Aurora
Type
User manual

Trixie Aurora is a 151 cm cat tree with a carpeted surface for your feline friend to enjoy. It features a sturdy bottom plate, a platform, a cozy cave, and multiple lying plates with edges for added comfort and stability.

The cat tree is easy to assemble, with clear instructions and all necessary hardware included. Simply screw the posts into the underside of the cave, connect the platform to the posts, and then screw the posts under the platform and attach the bottom plate. Next, connect the remaining posts to the lying plates and screw them into the upper platform. Finally, tighten all the posts to ensure stability.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents