Powers HydroGuard 410 Installation guide

Brand: Powers

Model: HydroGuard 410

Type: Installation guide

This manual is also suitable for

IS-P-410233-SE 1523 EDP# 6507675 © 2015 Powers

A Watts Water Technologies Company

USA: Tel: (800) 669-5430 • Fax: (847) 229-0526 • PowersControls.com

Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • PowersControls.ca

Latin America: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • PowersControls.com

Mixer Stem

Lever handle shown. Stem extensions may be "stacked" to

achieve a greater rough-in depth if needed.

Stem extension

3/4"

Lever handle Handle screw

WARNING: This product contains chemicals known to the

State of California to cause cancer and birth defects or

other reproductive harm.

For more information: Watts.com/prop65

WARNING

!

Read this Manual BEFORE using this equipment.

Failure to read and follow all safety and use information

can result in death, serious personal injury, property

damage, or damage to the equipment.

Keep this Manual for future reference.

STEM EXTENSION KIT #410-233 used on the following HydroGuards...Series 2000, Series P410 Models 1, 2, 3, and 5,

Series e420 Model 7-10, Series e700, Series F727 and Series PB410

The kit includes a stem extension and long screws to permit attachment of the stem extension. The long flat head screws

are also provided to attach the dial to the mixer bonnet. One kit adds 3/4” to the stem length.

The following table indicates where screws are used:

Installation Instructions n

HYDROGUARD

®

stem extension kit

for Series 2000, Series P410 Models 1, 2, 3, 5,

Series e420 Model 7-10, Series e700,

Series F727 and Series PB410

Technical Instructions

IS-P-410233-SE

Screws in Kit #410-233

Quantity Head Length Material Use to Attach...

2 flat 2-3/4 steel dials to mixer bonnet for e420, 2000 and P410

1 oval 1-1/2 chrome plated brass lever handle for e420, 2000 and P410

1 truss 1-1/4 steel lucite handle

2 oval 4 chrome plated brass dials to mixer bonnet for e700, F727 and PB410

1 oval 7/8 chrome plated brass lever handle for e420T/S, e700, F727 and PB410

1 oval 2 chrome plated brass stacking stem extensions

All screws have 8-32 threads

1

Powers HydroGuard 410 Installation guide

Brand: Powers

Model: HydroGuard 410

Type: Installation guide

This manual is also suitable for

Related papers

Other documents