2. RDI
  3. 61109087
61109087

RDI 61109087 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the RDI 61109087 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CROSSOVER PRODUCT™
POST WRAP INSTALLATION INSTRUCTIONS
Compatible with all RDI Products
POST WRAP
WARNING:
Always wear
safety goggles.
1.
Measure height of post or newel to
wrap. (fig.1) Subtract 1/8" to allow
for expansion, and cut all four quar-
ters of post wrap (fig.2).
(fig.1)
(fig.2)
3.2.
4.
Align and connect two quarters in
place around post (fig.3), and com-
press for a snug fit.
Remove the assembled half and set
safely aside.
Align and connect the remaining two
quarters (fig.4), but DO NOT COM-
PRESS — leave roughly 1/4".
Put the first assembled half into po-
sition and clamp in place (fig.5).
Align the channels and ribs of the
second half to the first and compress
until all four sides are equal in width
(fig.5&6).
(fig.6)
(fig.5)
(fig.4)
(fig.3)
RAILING DYNAMICS, INC.
FOR HOME, FOR LIFE™
135 STEELMANVILLE ROAD
EGG HARBOR TOWNSHIP, NJ 08234
TEL: (877) 420-7245
FAX: (866) 277-5160
E-MAIL: [email protected]OM
URL: WWW.RDIRAIL.COM
CMIPW/9.09
/