-1- -2-
INSTRUCTION OF THE PARTS
1. Dial knob to the end clockwise, the
temperature is “cold”.
2. Place knob at the middle, the
temperature is “normal”.
3. Dial knob to the end counter
clockwise, the temperature is
“warm”.
4. If dial refrigerator knob to “cold”
position, and the refrigerator temp.
is not enough, please dial the
freezer knob to colder position.
FREEZER TEMP.CONTROL
(The drawing is reference only)
NO Defrosting
Fan cooling refrigerator is not
necessary to defrost the freezer or
refrigerator. It is designed and
equipped to defrost itself automatically
and the thawed water evaporats after it
drains through hose to disposal pan.
ICE-MAKING
1. Fill the ice-tray with 80% of water.
2. Twist the ice-tray to remove the ice
cubes.
MAINTENANCE
1. Unless it is necessary, do not turn
the dial frequently.
2. Keep the refrigerator in operation
even in winter.
3 Please note the following instruc-
tions when the refrigerator is to be
left inoperative for a long period.
A. Detach the plug from socket.
B. Wait for complete defrosting.
C. Clean both the compartments
and accessories thoroughly with
lukewarm water mixed with a
little bicarbonate of soda.
D. Leave the door open for at least
2 or 3 days to permit free
circulation of air. So as to
prevent the forming of dis-
agreeable odour.
4. In and out the cabinet
Wipe the entire surface with a piece
of soft wet cloth or with lukewarm
water mixed with a little bicarbonate
of soda or mild detergent, but not
with hot water, acid, alcohol, strong
detergent and gasoline.
5. Accessories
Soap water may be used for
cleaning the ice-tary, inner shelf,
crisper and water disposal pan.
6. Mechanical part Hermetic type
comperessor requires no oiling.
CAUTION
1. When you discard a refrigerator
completely, remove the doors to
prevent child entrapment.
2. Perishable food such as icecream,
fish or meat (for long storage)
should be kept in the freezing
compartment.
3. Due to the circulation of cool air, the
coldest temperature of refrigerator
exists in lower shelf (as figure).
The Method to Change a Lamp.
1. Uses a screwarive to remove the
lampshade.
2. Takes off the lamp in anti-clockwise
direction and puts it on in clockwise
direction.
OPERATION
1. Attach plug into socket.
2. When the door is opened, the lamp
inside the refrigerator lights for
illumination.
It also signifies that electric current
is on.
3. Temperature is controlled according
to the dial plate as shown in the
figure.
4. When detach the plug from socket,
please wait 7 minutes before
restarting the compressor.
Adjustment of Temp.
REFRIGERATOR TEMP.
CONTROL
(The drawing is reference only)
(The drawing is reference only.)
NORMAL
WARM
COLD
NORMAL
COLD
WARM
FREEZER TEMP. CONTROL
ICE TRAY
ICE STORAGE
FREEZER SHELF
FREEZER AIR EXHAUST
FREEZER AIR INTAKE
CHILLED ROOM
REFRIGERATOR
TEMP. CONTROL
LAMP
CONDENSER(IN THE
BOTH SIDES OF THE
OUTER SHELL)
REFRIGERATOR AIR EXHAUST
SHELF
VEGETABLE CRISPER
LEVELING SCREW
CASTER
MAGNETIC
BOTTLE BRACKET
MINI RACK
DOOR SHELF
REFRIGERATOR AIR
INTAKE