RTS Omi - adam-m User manual

RTS
Brand
RTS
Model
Omi - adam-m
Type
User manual

RTS Omi - adam-m is a matrix interface that can be used to connect multiple audio devices together. It supports up to 64 channels of audio and can be used to create a variety of different system configurations. The Omi - adam-m is also compatible with a variety of different control systems, making it easy to integrate into existing systems.

Some of the possible use cases for the Omi - adam-m include:

  • Creating a distributed audio system for a large building or campus
  • Connecting multiple audio sources to a single amplifier
  • Providing audio for a live event or performance
  • Interfacing with a variety of different control systems

RTS Omi - adam-m is a matrix interface that can be used to connect multiple audio devices together. It supports up to 64 channels of audio and can be used to create a variety of different system configurations. The Omi - adam-m is also compatible with a variety of different control systems, making it easy to integrate into existing systems.

Some of the possible use cases for the Omi - adam-m include:

  • Creating a distributed audio system for a large building or campus
  • Connecting multiple audio sources to a single amplifier
  • Providing audio for a live event or performance
  • Interfacing with a variety of different control systems
Quick Start Guide
OMI - OMNEO Matrix Interface
Included:
• SafetyInstructionsST-CO
• OMIQuickStartGuide
• OMIDocumentationResourceDisk
• 2-ScrewPanhead,M2.5x10.0
• BackCardAssy.,OMI
• FrontCard,64CH,OMI
or
FrontCard,48CH,OMI
or
FrontCard,32CH,OMI
or
FrontCard,16CH,OMI
Requirements:
Youmusthavethefollowing:
• Screwdriver
• AZeditversion3.5
• IPEditversion3.4
• MCII-eversion2.9
ADAM-M Frame Installation
Important:.....Uptofour(4)OMIcardsetscanbeused
inanADAMMframeatatime.
Toinstall the OMI card into the ADAM-M frame,do
thefollowing:
1. UsingtheInstallationCD,followtheinstructions
inthereadme.txtletoinstallalltherequired
softwareneededforOMNEOfunctionality.
2. GentlyinserttheOMI front cardintothe
appropriateADAMMslot.
NOTE:Takecaretoinsertthecardproperly,asshown.
3. Usingthecardejectorstightendownthefront card
by pushing it into the slot.
4.
OnthebackoftheADAM-Mframe,carefullyinsert
theOMI back card,takingcaretoalignitwiththe
OMIfrontcard,asshownabove.
5. EnsuretheOMI back cardisseatedproperly
againsttheOMIfrontcardandissittingrmlyin
theframe.
6. Usingthesuppliedscrews,tightentheOMI back
cardtotheframe.
7. Ensurethecard ejectorsaretightenedtothe
chassisontheOMIfrontcard.
F01U273977Rev05 07/2014
Quick Start Guide
OMI - OMNEO Matrix Interface
ADAM Frame Installation
Important:....Uptoeight(8)OMIcardsetscanbe
usedinanADAMframeatatime.
Toinstall the OMI card into the ADAM frame,dothe
following:
1. GentlyinserttheOMI front cardintothe
appropriateADAMslot.
2. Usingthecardejectors.tightendownthefront
card.
3. OnthebackoftheADAMframe,carefullyinsert
theOMI back card,aligningitwiththeOMIfront
card.
4. EnsuretheOMI back cardisseatedproperly
againsttheOMIfrontcardandissittingrmlyin
theframe.
5. Usingthesuppliedscrews,tightentheOMI back
cardtotheframe.
6. Ensurethecard ejectorsaretightenedtothe
chassisontheOMIfrontcard.
Quick Start Guide
OMI - OMNEO Matrix Interface
Cabling
DB-9 Connector Pinouts
RS-232 Mode
Pin1...............................................................................N/A
Pin2..................................................... RS232-TXDOutput
Pin3........................................................RS232-RXDInput
Pin4...............................................................................N/A
Pin5.........................................................................Ground
Pin6...............................................................................N/A
Pin7...............................................................................N/A
Pin8...............................................................................N/A
Pin9...............................................................................N/A
RS-485 Mode
Pin1...............................................................................N/A
Pin2....................................................................... RS485+
Pin3........................................................................ RS485-
Pin4...............................................................................N/A
Pin5.........................................................................Ground
Pin6...............................................................................N/A
Pin7...............................................................................N/A
Pin8...............................................................................N/A
Pin9...............................................................................N/A
Ethernet 1000/100/10
Pin1BI_DA+...................................... Bi-directionalpairA+
Pin2BI_DA-........................................ Bi-directionalpairA-
Pin3BI_DB+...................................... Bi-directionalpairB+
Pin4BI_DC+...................................... Bi-directionalpairC+
Pin5BI_DC-........................................Bi-directionalpairC-
Pin6BI-DB-......................................... Bi-directionalpairB-
Pin7BI_DD+...................................... Bi-directionalpairD+
Pin8BI_DD-........................................Bi-directionalpairD-
Conguration
ConsulttheOMITechnicalManual(P/NF.01U.261.047)
forspecicinstructionstocompletethefollowingsteps.
Tocongure the OMI card in AZedit,dothefollowing:
Step1: DownloadtheLicenseFileformorechannels,if
applicable.
Step2: AssignportstothecardusingthePort
Allocationtable.
Step3: Setupthenetworkconguration.
Step4:CongureKeypanelstotheOMIcards.
Tocongure the OMI card in IPedit,dothefollowing:
Step1: UsingAZedit,downloadtheLicenseFilefor
morechannels,ifapplicable.
Step2: AddtheOMItoIPedit,usingAddDevice.
Step3: Setupthenetworkconguration.
Step4: CongurekeypanelstotheOMIcards.
System Drawing
Singlesubnetsystemwithlessthan128OMNEO
nodes:
For the most current user documentation,
rmware, and software, visit
www.rtsintercoms.com.
  • Page 1 1
  • Page 2 2
  • Page 3 3

RTS Omi - adam-m User manual

RTS
Brand
RTS
Model
Omi - adam-m
Type
User manual

RTS Omi - adam-m is a matrix interface that can be used to connect multiple audio devices together. It supports up to 64 channels of audio and can be used to create a variety of different system configurations. The Omi - adam-m is also compatible with a variety of different control systems, making it easy to integrate into existing systems.

Some of the possible use cases for the Omi - adam-m include:

  • Creating a distributed audio system for a large building or campus
  • Connecting multiple audio sources to a single amplifier
  • Providing audio for a live event or performance
  • Interfacing with a variety of different control systems
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents