LG LAD350H User manual

Type
User manual

This manual is also suitable for

Please read this manual carefully before operating
your set and retain it for future reference.
LAP250H
LAD350H
OWNER’S MANUAL
ENGLISH
www.lg.com
SoundPlate
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sucient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
CAUTION: Do not use high voltage products
around this product. (ex. Electrical swatter) This
product may malfunction due to electrical shock.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturers
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturers
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owners manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. The
Power Plug is the disconnecting device. In case of
an emergency, the Power Plug must remain readily
accessible.
NOTICE: For Product Identication and
Compliance/Safety labeling information please
refer to Main Label on the bottom of Unit.
Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery from the
equipment: Remove the old battery or battery
pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to
human and animal health, the old battery or
the battery put it in the appropriate container
at designated collection points. Do not dispose
of batteries or battery together with other
waste. It is recommended that you use local,
free reimbursement systems batteries and
accumulators. The battery should not be exposed
to excessive heat such as sunshine, re etc.
Disposal of your old appliance
1. All electrical and electronic products should
be disposed of separately from the municipal
waste stream via designated collection facilities
appointed by the government or the local
authorities.
2. The correct disposal of your old appliance will
help prevent potential negative consequences
for the environment and human health.
3. For more detailed information about disposal
of your old appliance, please contact your city
office, waste disposal service or the shop where
you purchased the product.
Disposal of waste batteries/accumulators
1. This symbol may be combined with chemical
symbols for mercury(Hg), cadmium(Cd) or
lead(Pb) if the battery Contains more that
0.0005% of mercury,0.002% of cadmium or
0.004% of lead.
2. All batteries/accumulators should be disposed
separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of Your old batteries/
accumulators will help to prevent potential
negative consequences for the environment,
animal and human health.
4. For more detailed information about disposal of
Your old batteries/accumulators, please contact
Your city office, waste disposal service or the
shop where You purchased the product.
Getting Started4
Getting Started
1
Declaration of Conformity
Hereby, LG Electronics European Shared Service
Center B.V., declares that this SoundPlate is
compliant with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
The complete Declaration of Conformity may be
requested through the following postal address:
LG Electronics European Shared Service Center B.V.
European Standard Team
Krijgsman 1
1186 DM Amstelveen
The Netherlands
or can be requested at our dedicated DoC website:
http://www.lg.com/global/support/cedoc/cedoc#
This device is a 2.4 GHz wideband transmission
system, intended for use in all EU member states
and EFTA countries.
Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique features
6 Introduction
6 Symbols used in this manual
6 Accessories
7 Remote control
8 Front panel
9 Rear panel
10 Setting up the unit
2 Connecting
13 Connecting to your TV
13 Using an OPTICAL cable
13 Using an HDMI cable
14 What is SIMPLINK?
14 ARC (Audio Return Channel) function
15 Additional information for HDMI
16 Optional equipment connection
16 HDMI connection
17 OPTICAL IN connection
17 PORTABLE IN connection
18 USB connection
18 Compatible USB devices
18 USB device requirement
18 Playable file
3 Operating
20 Basic operations
20 USB operation
21 Other operations
21 DRC (Dynamic Range Control)
21 AV Sync
21 Turn off the sound temporarily
21 Displaying file and input source
21 Sleep timer setting
22 Using your TV remote control
22 AUTO POWER On/Off
23 Auto function change
24 LG Sound Sync
24 With wired connection
25 With wireless connection
25 Using BLUETOOTH®
technology
26 Listening to music stored on the
Bluetooth devices
27 Using Bluetooth App
27 Install “Music Flow Bluetooth” App
onto Your Bluetooth Device
28 Activate Bluetooth with “Music Flow
Bluetooth” App
29 Sound adjustment
29 Setting sound effect
29 Adjust volume level automatically
29 Adjust the Treble/Bass/Subwoofer
29 Night mode
4 Troubleshooting
30 Troubleshooting
5 Appendix
32 Trademarks and licenses
33 Specifications
34 Maintenance
34 Handling the unit
Getting Started6
Getting Started
1
Unique features
Auto power down
This unit will turn o by itself for energy saving
consumption.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Introduction
Symbols used in this manual
,
Note
Indicates special notes and operating features.
>
Caution
Indicates cautions for preventing possible damages
from abuse.
Accessories
Please check and identify the supplied accessories.
Designs and specications of the accessories are
subject to change without prior notice.
Remote control (1) Batteries (2)
Power cord (1)
Getting Started 7
Getting Started
1
Remote control
Replacement of battery
Remove the battery cover on the rear of the
Remote Control, and insert two R03 (size AAA)
batteries with and matched correctly.
• • • • • • • • • •
a
• • • • • • • • •
1
(Power) : Switches the unit ON or OFF. / Switches
to the standby mode.
FUNC : Selects the function and the input source.
(Mute) : Mutes the sound.
OPTICAL : Changes input source to OPTICAL
directly.
SOUND EFFECT : Selects a sound eect mode.
: Adjusts sound level of Treble, Bass and
Subwoofer.
VOL
o
/
p
: Adjusts speaker volume.
• • • • • • • • • •
b
• • • • • • • • •
REPEAT : Listen to your music repeatedly.
C/V
(Skip) : Skips Fast backward or Forward.
dM
(Play/Pause) : Starts playback. / Pauses
playback.
Z
(Stop) : Stops playback.
• • • • • • • • • •
c
• • • • • • • • •
DRC : Turns on or o DRC function.
(Night mode) : Turns on or o Night mode.
AUTO VOL : Turns on or o the AUTO VOLUME
mode.
AV SYNC : Synchronizes the audio and video.
SLEEP : Sets the system to turn o automatically at
a specied time.
AUTO POWER : Turns on or o AUTO POWER
function. (Refer to the page 22.)
FOLDER
o
/
p
: Searches a folder on USB device.
INFO :
-
Displays the information of a le or an input
source.
-
Controls TV remote (Refer to the page 22)
Getting Started8
Getting Started
1
A
1/!
(Standby/On)
B
F (Function)
Selects the function and input source.
C
p/o
(Volume)
Adjusts volume level.
D
Standby LED
It lights up in red on standby mode.
E
Display window
F
Remote sensor
Front panel
Getting Started 9
Getting Started
1
A
AC IN
B
HDMI OUT (TV ARC) : HDMI output
C
HDMI IN : HDMI input
D
USB port
E
OPTICAL IN : Optical input
F
PORTABLE IN : Portable input
Rear panel
Getting Started10
Getting Started
1
Setting up the unit
This unit is designed to be positioned under your
TV.
Before setting up this system with your TV, make
sure your TV's specications.
y
Weight
Max. 18 kg
y
Size of the base
Max. 510 mm
Max. 270 mm
y
Be careful not to make scratches on the
surface of the Unit /Sub-Woofer when
installing or moving them.
y
Do not try to set up this unit alone. It may
need at least 2 persons to lift your TV.
Otherwise it may result in a personal injury
and/or property damages.
y
Do not connect a CRT type TV to this unit.
Because this unit contains magnetic parts,
colour irregularity may occur on the TV
screen.
y
Do not put the other objects except a TV or
a monitor on the unit.
y
The unit must be set up on a stable and
horizontal surface.
y
Do not put any other objects between the
unit and the mounting surface when you
set up the unit.
>
Caution
It is recommended to set up the unit on a
suciently rm and horizontal surface.
,
Recommendation
1. Place the unit on the position where you want
to place your TV.
Getting Started 11
Getting Started
1
2. Connect all the cables of external devices you
want to use such as TV, Blu-ray disc player or
DVD player. You should also connect a power
cord supplied as an accessory.
Because it is dicult to make a connection
after installing this unit, you should connect
the cables before installation.
>
Caution
TV
Blu-ray disc player,
DVD player, etc.
Power cord
For more information of connections and
operations, refer to the pages below.
(O) Optical : See page 13 and page 17.
(H) HDMI : See page 13 and page 16.
(P) Portable : See page 17.
You can connect a USB in a way that is easier
and more convenient by using a USB extension
cable and purchase the cable from nearest LG
Electronic Service point.
,
Recommendation
3. Place your TV on the center of the unit.
y
Be careful not to hide control buttons on
the top of this unit when you put your
TV on the unit.
y
Keep the distance of the base of your TV
from the edge of the unit.
Available zone
(Top of the unit)
20 mm10 mm 10 mm
30 mm
>
Caution
4. Plug in the power cord of the unit.
Getting Started12
Getting Started
1
y
Do not place your TV on the edge of this
unit. Otherwise it may result in a personal
injury and/or property damages.
y
If your TV is over recommended weight
(max. 18 kg) or has a Base larger in area than
the Unit do NOT place TV on the Unit.
-
In this case, it is recommended to place this
system in another location such as on the
shelf under the TV.
>
Caution
2 Connecting
Connecting 13
Connecting
2
Connecting to your TV
Please connect with this unit and TV using the
optical digital cable or HDMI cable considering the
state of the TV.
Using an OPTICAL cable
1. Connect the OPTICAL IN jack on the back of the
unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Optical cable
2. Set the INPUT source to OPTICAL. Press
repeatedly FUNC on the remote control or
F on the unit until the function is selected.
To directly select the OPTICAL function, press
OPTICAL on the remote control.
y
Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
y
You can enjoy the TV audio through the
speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)
y
Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound
output]
[
[External speaker (Optical)]
y
Details of TV setting menu vary depending
on the manufacturers or models of your TV.
,
Note
Using an HDMI cable
If you connect this unit to a TV that supports HDMI
CEC and ARC (Audio Return Channel), you can
enjoy the TV audio through the speakers of this unit
without connecting the optical cable. Please refer
to your TV user manual when you check HDMI CEC/
ARC function of your TV.
HDMI cable
y
HDMI CEC (Consumer Electronics Control):
Using a single remote control, you have the
ability to operate CEC compatible devices
(TV, Sound Bar, Blue-ray player, etc.)
y
You can also enjoy extra functions such
as USB / Bluetooth with FUNC on remote
control or F on this unit. When you go back
to live TV channel after using the extra
functions (USB / Bluetooth) of this audio
system, you should choose your preferred
speaker on TV to enjoy the sound from this
audio system again.
,
Note
HDMI cable Checklist
Some HDMI cables do not support the ARC
function, this can result in no sound output.
When connecting this unit to the TV, if there is no
sound, there might be a problem with the HDMI
cable. Therefore connect this unit to the TV and
check whether the Type A, High speed HDMI™
Cable with Ethernet.
STANDARD HDMI CABLE WITH ETHERNET
HIGH SPEED HDMI CABLE
HIGH SPEED HDMI CABLE WITH ETHERNET
(X)
(X)
(O)
Connecting14
Connecting
2
Enjoy rich sound with this unit
Connection through HDMI Cable
Your television must support the HDMI features
(HDMI CEC
1)
/ ARC (Audio Return Channel)) to fully
enjoy the Live broadcasting channel with audio
system through an HDMI cable. Unless your TV
supports these HDMI features, the audio system
should be connected through an OPTICAL cable.
1) HDMI CEC (High-Denition Multimedia Interface
Consumer Electronics Control)
Consumer Electronics Control (CEC) is an HDMI
feature designed to allow the user to command
and control the CEC-enabled devices, that are
connected through HDMI by using only one of
their remote controls.
Trade names for CEC are SimpLink (LG) , Anynet+
(Samsung), BRAVIA Sync/ Link (Sony), EasyLink
(Philips), EZ-Sync/ VIERA Link (Panasonic), etc.
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TVs remote control :
Power on/o, volume up/down, mute, etc.
Refer to the TV owners manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
y
Depending on the state of the unit, some
SIMPLINK operation may dier from your
purpose or not work.
y
Depending on a TV or a player which
is connected with this unit, SIMPLINK
operation may dier from your purpose.
,
Note
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of the unit.
To use this function :
-
Your TV must support the HDMI-CEC and ARC
function and the HDMI-CEC and ARC must be
set to On.
-
The setting method of HDMI-CEC and ARC may
dier depending on the TV. For details about
ARC function, refer to your TV manual.
-
You must use the HDMI cable (Type A, High
Speed HDMI™ cable with Ethernet).
-
You must connect the HDMI OUT on the unit
with HDMI IN of the TV that supports ARC
function using an HDMI cable.
-
You can connect only one unit to TV compatible
with ARC.
y
ARC function is automatically selected when
ARC signal comes in from TV, no matter
what kind of the function you are using.
y
You can enjoy the TV audio through the
speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)
y
Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound
output]
[
[External speaker (HDMI ARC)]
y
Details of TV setting menu vary depending
on the manufacturers or models of your TV.
y
If you change to other function while you
are using ARC function, you need to adjust
ARC setting on TV setting again to use ARC
function.
,
Note
Connecting 15
Connecting
2
Additional information for
HDMI
y
When you connect an HDMI or DVI compatible
device make sure of the following:
-
Try switching o the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-
The connected device’s video input is set
correctly for this unit.
-
The connected device is compatible with
720 x 576p, 1280 x 720p, 1920 x 1080i,
1920 x 1080p or 4096 x 2160p video input.
y
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-
The picture will not be displayed properly
with non-HDCP device.
y
If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
y
Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn o the player and then turn it
on again.
y
When the HDMI connection with HDCP
is not veried, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
y
If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft).
y
You cannot change the video resolution
in the HDMI IN mode. Change the video
resolution of the connected component.
y
If the video output signal is abnormal when
your personal computer is connected to
HDMI IN jack, change the resolution of your
personal computer to 576p, 720p, 1080i or
1080p.
,
Note
Connecting16
Connecting
2
Optional equipment
connection
HDMI connection
You can enjoy the sound and picture from HDMI
connection on external device.
For enjoying sound only
You can enjoy the sound from the external device
you connect.
To the Blu-ray disc player, DVD player,
etc.
1. Connect HDMI IN 1 or HDMI IN 2 jack on the
back of the unit to HDMI OUT jack on the audio
device such as Blu-ray disc player, DVD player,
etc.
2. Set the input source to HDMI IN 1 or HDMI IN 2.
Press repeatedly FUNC on the remote control
or F on the unit until the function is selected.
For enjoying both sound and picture
You can enjoy both sound and picture from the
external device you connect.
1. Connect HDMI IN 1 or HDMI IN 2 jack on the
back of the unit to HDMI OUT jack on the
external device such as Blu-ray disc player, DVD
player, etc.
2. Connect HDMI OUT jack on the back of the unit
to HDMI IN jack on the TV.
3. Set the input source to HDMI IN 1 or HDMI IN 2.
Press repeatedly FUNC on the remote control
or F on the unit until the function is selected.
y
With the unit connected to external devices
and TV as above illustration, TV will output
picture and sound from external devices
when the unit is turned o in only HDMI IN
1 mode.
y
HDMI OUT jack is for TV connection. Even
though multi channel is inputted to the unit
through an HDMI cable, the unit can only
output 2 channel to TV.
y
Audio sources without any transformation
pass through this unit when this unit is
turned o.
,
Note
Connecting 17
Connecting
2
OPTICAL IN connection
Listens to sound from TV, DVD or Digital Device
with 2.1 or 2 ch mode.
To the optical output jack
of external device
1. Connect the OPTICAL IN jack on the back of
the unit to optical out jack of your TV (or digital
device etc.) by using an optical cable.
2. Select the input source to OPTICAL by pressing
FUNC on the remote control or F on the unit
until the function is selected.
To directly select the OPTICAL function, press
OPTICAL on the remote control.
3. Listen to sound.
4. Press OPTICAL to exit from OPTICAL.
Function is retuned to previous one.
y
Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
y
When you Press OPTICAL button on the
remote, while unit is turned o, the unit will
be turned on and optical function will be
selected.
,
Note
PORTABLE IN connection
Listening to music from your
portable player
The unit can be used to play the music from many
types of portable players or external devices.
1. Connect the portable player to the PORTABLE IN
connector of the unit by using a 3.5 mm stereo
cable.
2. Turn the power on by pressing
1
(Power).
3. Select the PORTABLE function by pressing
FUNC on the remote control or F on the unit
until the function is selected.
4. Turn on the portable player or external device
and start playing it.
Connecting18
Connecting
2
USB connection
Connect a USB device to the Unit.
For more information of playing les on a USB, refer
to the page 20.
Removing the USB Device from the unit.
1.
Choose a different function/mode or press
Z
twice in a row.
2. Remove the USB device from the unit.
Compatible USB devices
y
MP3 Player : Flash type MP3 player.
y
USB Flash Drive : Devices that support USB 2.0.
y
The USB function of this unit does not support
some USB devices.
USB device requirement
y
Devices which require additional program
installation connected to a computer, are not
supported.
y
Do not extract the USB device while in operation.
y
For a large capacity USB, it may take longer than
a few minutes to be searched.
y
To prevent data loss, back up all data.
y
This unit is not supported when the total
number of les is 2000 or more.
y
The unit’s USB Port cannot be connected to PC.
The unit can not be used as a storage device.
y
The exFAT le system is not supported on this
unit. (FAT16/FAT32/NTFS systems are available.)
y
Depending on some devices, it may not available
to recognize the followings on this unit.
-
External HDD
-
Card readers
-
Locked devices
-
Hard type USB devices
-
USB hub
-
Using USB extension cable
-
iPhone/iPod/iPad
-
Android device
Playable file
Sampling Frequency
MP3 : within 32 to 48 kHz
WMA : within 32 to 48 kHz
OGG : within 32 to 48 kHz
FLAC : within 32 to 192 kHz
WAV : within 32 to 48 kHz
Bitrate
MP3 : within 80 to 320 kbps
WMA : within 56 to 128 kbps
OGG : within 64 to 500 kbps
FLAC : within 500 to 5000 kbps
WAV : within 500 to 5000 kbps
y
Maximum les : Under 1999
y
A protected le by DRM (Digital rights
management) cannot be played on the unit.
y
Video les in the USB storage device can not be
played.
y
Depending on the performance of your USB
device, playback may not work well.
Connecting 19
Connecting
2
y
Folders and les on the USB are recognized
as below.
A
: File
: Folder
*ROOT
B
C
D
E
F
G
H
I
J
a
c
b
d
y
If there is no le in a folder, the folder will
not appear.
y
File will be played from le
$A
to le
$J
one by one.
y
Files and folders will be presented in order
recorded and may be presented dierently
depending on the record circumstances.
y
This unit can display le or folder names
that contain numbers or English characters
only.
y
*ROOT : The rst screen you can see when a
computer recognize the USB is “ROOT”.
,
Note
3 Operating
Operating20
Operating
3
Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNC on
the remote control or F on the unit until the
function is selected.
To Do this
Stop Press
Z
.
Playback Press
d/M
.
Pause
During playback, press
d/M
.
Skip to the next/
previous le
During playback, press V
on the remote control to go
to the next le.
Playing less than 2 seconds,
press C on the remote
control to go to the previous
le.
Playing after 3 seconds, press
C on the remote control
to go to the beginning of
the le.
Search for a
section within a
le
Press and hold
C/V
during playback and release it
at the point you want to listen
to.
Play repeatedly
or randomly
Press REPEAT on the remote
control repeatedly, the
display will be changed in the
following order, OFF
ONE
FOLDER ALL RANDOM.
Search a folder
Press FOLDER
o/p
on the
remote control.
Resume
playback
This unit memorizes a current
song which is played before
changing the function or
turning o the unit.
y
The resume point may be cleared when you
pull out the power cord or removing the
USB device from the unit.
y
Repeat/Random playback operates as
follows.
On Display Description
OFF
Plays songs on USB
device in order.
ONE
Plays a same song
repeatedly.
FOLDER
Plays songs in a folder
repeatedly.
ALL
Plays all the songs on
USB device repeatedly.
RANDOM Plays songs randomly.
,
Note
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35

LG LAD350H User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI