Samsung SR-26NME User manual

Type
User manual
REFRIGERATOR CONTENTS
1.Safety precautions and warnings
2.Product specifications
3.Electrical part specifications & standard
4.Product dimension
5. Identifying and disassembling the parts
6.Schematic diagram of coolant gas circulation
7. Circuit diagram
8. Packing dimensin
9. Schematic siagram of cold air flow
10. Troubleshooting method
11. Exploded view & part list
Model: SR-21NME/21WME
SR-24NME/24WME
1.Safety precautions and warnings
2
SR-21/24 NME(WME)
Read all instructions before using this appliance in risk of accident order to avoid
or property damage.
Warning
Warning
Caution
Description of symbolsWarning/Caution
This symbol is intended to
alert the user to the posslble
death or injury.
This symbol is intended to
alert the user to the posslble
injury or damage
In dicates prohibition
Do not disassemble
Do not contant
Adhere the instruction strictly
Unplug from the electrical outlet
Earth the appliance to avoid the risk of
an electric shock
Do not plug multiple electyical
appliances into the same outlet.
This may cause abnormal heating or
fire hazard
.
Do not attempt to make repairs
yourself
This could lead to fire hazard or
abnormal operation causing severe
personal injury.
Make sure the power cord is not
crushed or damaged.
Repair immediately all power cords or
outlets that have become frayed or
otherwise damaged.
Check the operating environment.
Do not install the refrigerator in a
humid(with condensation)location or
on an unstable surface.
Do not attempt to make repairs
yourself.
This could lead to fire hazard or
abnormal operation causing severe
personal injury.
Make sure the power cord is not
crushed or damaged.
Repair immediately all power cords
or outlets that have become frayed
or otherwise damaged.
Prohibition
Do not
disassemble
Earth
Unplug
3
SR-21/24 NME(WME)
Caution
Do not store bottled food or
drinks in the freezing
compartment.
●Bottles may explode causing
personal injury.
Do not store food in an unstable
manner.
Opening the door may trigger loose
items to slip and cause injury.
Do not store anything other
than food in the refrigerator.
Medical supplies which need to be
under strict not be stored in the
refrigerator.
Do not put anything on top of
the refrigerator.
Opening or closing the door may
trigger loose items to slip and
cause injury.
When replacing electric
comporents, be sure to use rates
comporents.
Check the model, rated voltage, rated
current, operating temperature etc. of
the component.
When servicing the refrigera-tor,
completely remove dust or
foreign substances from the
housing,electric conne-ctions
and etc.
This can proect against the risk of fire
hazard caused by tracking and short
circuit.
When servicing the refrigerator,
completely remove dust or foreign
substances from the housing,
electric connections and etc.
This can protect against the risk of fire
hazard caused by tracking and short
circuit.
After serving the refrigerator, be
sure to check the components are
reassembled in a correct manner.
The serviced unit should be
reassembled and returned to its
original assembly state.
Check the electrical parts for the
trace of moisture penetration.
When the trace of moisture pentration
is detected, replace the part or dry
insulation tapping.
Prohibition
Prohibition
Prohibition
Prohibition
Reted
components
2.Product Specifcations
4
SR-21/24 NME(WME)
ITEM
Model name
Type
Power source
STANDARD
Net capacity
(it/cu.ft)
Net dimension
(mm)
Freezer
Refrigerator
Total
Width
Depth
Height
Net weight (kg)
Refrigerant
Temperature control
Defrosting
Foam insulation
Cabinet
Door
Liner / Door panel
Accessory parts
Door
storage
inside
storage
interior Lamp(H/M)
Angle adjustment
SR-21NME/24WME
2-Door Freezer/Refrigerator
AC 115V/60HZ, 127V/60Hz
220V/50~60Hz, 230~240V/50Hz
D-134a(130gr)
Dial(Thermostat)
Automatic(Start-Finish by Timer)
R-141b
R-141b
ABS
1(Refrigerator)
2Legs(Front)
2 Guard-freezer
1 Guard-egg
1 Guard-variety
2 Guard-bottle
2 Guard-freezer
1 Guard-egg
1 Guard-variety
2 Guard-bottle
1 Base-tray ice(H)
1 Case-tray ice, assy(H)
1 Tray-ice cube
1 Shelf0freezer, sub(H)
1 Cover-vegetable
1 Tray-vegetable
2 Shelf-refrigerator(H)
1 Tray-chilled room(H)
1 Cover-chilled room(H)
1 Shelf-freezer wire(L)
1 Tray-ice,b(L)
1 Shelf-ref wire(L)
52(1.8)
133(4.7)
182(6.5)
545
589
1453
1553
52(1.8)
133(4.7)
182(6.5)
SR-24NME,24WME
3. Electrical part specification & standard
5
SR-21/24 NME(WME)
ITEM
Model
Power source
Compressor
STANDARD
Model
Starting type
Oil charge
Freezer
Refrigerator
Bimetal
(ON/OFF)
Thermal fuse
Type
Cycle
Time
Model
Resistance
Thermostat
Defrost-thermo
Defrost-timer
Starting-relay
Over load
protector
Capacitor
Model
Close temp
Open temp
Running
Starting
Motor-fan
Heater-defrost
Lamp
Door-switch
Earth screw
Evaporator
Condenser
Dryer
Capillary tube
SR-21NME, 21WME / SR-24NME, 24WME
R.S.C.R
FREOL
α-15c / 200cc
Split fin type
Forced & natual convection
Molecular sieve
I.D 0.75 x 3400 (mm)
8032
D705-E9C
115V/60HZ
SD152C-L1W2
C.S.R
Type
Oper. temp
Regularity
Oper. temp.
TMDE714F1
4TM427
PHBYY-53
4TM265
PHBYY-53
61±9
125±5
912X32E100MQ16APE2
33Ω±20%
4TM222
PHBYY-53
AC250V / 5A
ON:-5±3/OFF:12±3
AC 250V / 10A
72±4
TMD706SC1
6Hr 35min
13min 40s
912X32E100MQ16APE3(60Hz)
40Ω±20%
220V/50~60HZ
SD162H-L1U2
230~240V/50HZ
SD162Q-L1U2
125 / 100VAC
8 / 250VAC
IS3210SMF6D
130W/93
110V / 15W
130W406.9
220V/15W
130W443
240V/15W
SSD-5 250V/0.5A
BSBN(Brass screw)
3.5/350VAC
-
IS3210SNF7A
4.Product Dimension
6
SR-21/24 NME(WME)
1071.0
500.0
9.5
366.5
545.0
59.5
51.0
B
A
545.0
77.5
MODEL
SR-21NME, 21WME
SR-24NME, 24WME
A
1453
1553
B
874.5
974.5
Remark
5.Identifying and dissembling the parts
7
SR-21/24 NME(WME)
To remove shelves in the
freezing compartment
First remove the icemaking
molds. Tilt the shell up at front,
then lift it up pull it out of the tracks.
To remove shelves in the
chilled compartment
Lift up the cover, push the cover to
the right until the mounting hook
disengages, then disengage the
other mounting hook and pull out the
cover.
Pull the shelf forward until it stops.
Then lift it up and pull it out.
To remove door bins
While pushing the bin to the left, left
it up to disengage.
To remove shelves in the
refrigerating compartment
Hold the shelf by the front and pull
it forward of the rack.
To remove storage
drawers and covers
Lift up to remove the cover. Pull
the drawer out then lifting it up.
6. Schematic diagram of coolant circulation
8
SR-21/24 NME(WME)
COMPRESSOR CLUSTER PIPE HOT PIPE DRYER CAPILLARY TUBE
EVAPORATOR ACCUMULATOR SUCTION PIPE COMPRESSOR
PIPE-CLUSTER,B
PIPE-CLUSTER,A
DRYERA
ACCUMULATORB
EVAPORATOR
HOT-PIPE
SUCTION
PIPEA
COMPRESSOR
CAPILLARY TUBE
7.Circuit diagram
9
SR-21/24 NME(WME)
7-1. SR-21/24NME
F.M
M
L
YEL
WHT
BRN BRN RED PNK
ORG
M
C
1
2
3
S
6
52
3
S/BLU
S/BLU
S/BLU BLU
P.T.C RELAY
F-THERMOSTAT
THERMO FUSE
FAN MOTOR
COMPRESSOR
DEFROST
TIMER
DEFROST
HEATER
OVERLOAD
PROTECTOR
BIMETAL
THERMO
RUNNING
CONDENSER
GRY
GRY - GRAY
RED - RED
BRN - BROWN
YEL - YELLOW
PNK - PINK
BLK - BLACK
WHT - WHITE
BLU - BLUE
S/BLU - SKY BLUE
RED
RED
RED
RED
R/LAMP
W/BLK
DOOR-S/W
L
E
N
1
2
3
4
7-2. SR-21/24WME
F.M
M
L
YEL
WHT
MOTOR-PLMP
WATER-DISPENSER
MICRD-S/W
LED
BRN BRN RED
RED
RED
BLK GRY
PNK
ORG
M
C
1
2
3
S
6
52
3
S/BLU
S/BLU
S/BLU BLU
P.T.C RELAY
F-THERMOSTAT
POWER-PCB
THERMO FUSE
FAN MOTOR
COMPRESSOR
DEFROST
TIMER
DEFROST
HEATER
OVERLOAD
PROTECTOR
BIMETAL
THERMO
RUNNING
CONDENSER
GRY
GRY - GRAY
RED - RED
BRN - BROWN
YEL - YELLOW
PNK - PINK
BLK - BLACK
WHT - WHITE
BLU - BLUE
S/BLU - SKY BLUE
RED
RED
RED
RED
R/LAMP
W/BLK
DOOR-S/W
L
E
N
1
2
3
4
M
8.Packing dimension
10
SR-21/24 NME(WME)
MODEL
SR-21NME, 21WME
SR-24NME, 24WME
A
636
636
B
596
596
C
1581
1681
Remark
9. Schematic diagram of cold air flow
11
SR-21/24 NME(WME)
Cold air
circulation fan
Freezer
Cold air suction
Freezer
compartment
Super fresh
compartment
Fresh food
compartment
Storage
drawer
Bio deodorizer
Median divider
Damper cover
Rotating blade
Cold air exhaust
Cold air generated from the cooling
system is distribued to the freezing
compartment and the refrigeratung
compartment by the air circulation fan.
In the freezing compartment, cold air is
distributed to the compartment as as
well as to the shelves from the cold air
exhaust port, food is frozen in the
freezing compartment by cold air
shower.
Cold air that comes out of the freezing
compartment is absorbed back to the
lower part fo the cooling system
through the suction port on the median
divider.
In the refrigerating compartment, cold
air is distributed to the damper cover
through the medien divider.
coner through the median divider.
Cold air supplied to the damper cover
passes through the rotating blade and
evenly cools the refrigerating
comparment.
After cooling the refrigerating
compartment, cold air is absorbed to
the lower part of the cooling system
through the suction port the median
divider.
10.Troubleshooting method
12
SR-21/24 NME(WME)
10-1 The refrigerator does not operate
Is the interior light
on when the door switch is
pushed?
Does the compressor operate?
The compressor is operated for more
than 30 minutes and the refrigerator.
The compressor is defective
The freezing cycle has a problem
Make sure the refrigerator is plugged in
at the wall outled.
Make sure that
the thermometer in the freezer
compartment is electrcally
connected.
Chesk the defrost timer
Check the P.T.C relay
Check the overload relay
Check the condenser
The compressor is defective
Replace the defective part
If the fan operates when you push the
door switch, it is normal (Replace if it is
defective)
Replace the defective part
Check the electrical connection
Check for the abnormalities
No
No No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
10-2 Defrosting mechanism does not work
13
SR-21/24 NME(WME)
10-3 Defrosting mechanism does not work
Check that the defrost
timer operates properly
Check the temperature fuse
Check the bimetal
thermometer
chect the defrost heater
Replace the defrost timer
Replace the defrst heater
Replace the bimetal thermometer
Replace the temperature fuse
Does the cooling fan operate?
Is too much
food stored in the freezer
compartment?
Is the freezer defrosted normally?
Is the door closed properly?
Is the door stopper hinge normal?
Check the cooling fan motor
Check the door swittch
Defrost timer
Temperature fuse/ Bimetal thermometer
Defrost heater
Check that the door gesket is properly
seled, check for the damaged gasket.
Correct or readjust the door stopper
hinge
Tightly cover stored ice cubes.
Tightly cover stored frozen food.
Destribute food evenly in the comparment
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
No
Yes
10-4 Trouble chesk for the cooling cycle
14
SR-21/24 NME(WME)
Moisture in the refrigerant
causes the malfunction.
Foreign substances
hamper the cooling cycle.
The comperssor is
defective
Too much refrigerant
Refrigerant leaks.
(Slight refrigerant leakage
causes partial cooling
with frost on the EVAP)
Replace the refrigerant
Locate the disturbed section
and make repairs
Replace the compressor
Replace the refrigerant
After welding the leaked
spot, replace the refrigerant
Symptom
Cause Suggestions
The EVAP cools down and warms again
The condenser warms in proportin as the
EVAP cools,
The process continues to repeat.
The condenser is cold
The EVAP is not cold
The temperature of the comrressor is
high
No difference in temperatures
detween suction pipe and discharge
pipe
The temperature of the compressor
is maintained at room temperature.
The EVAPdoes not cool down.
Frost on the suction pipe
The condenser is overheated.
The refrigeration in the EVAP is not
effecient.
The condenser is cold.
The compressor surface temperature
is hogh.
The refrigerator is not easily get
cooled.
10-5 Diagnosing the main components
15
SR-21/24 NME(WME)
Compressor
P.T.C Relay
Condenser
Overload relay
Circuit-motor
&
Fan-motor
Rotating blade
geared-motor
Door switch
Defrost timer
Defrost heater
Bimetal
Temperature fuse
Use the tester to measure the
resistance.
- Bring the component to cool down
completely before measuring.
Use the tester to measure the
resistance.
- Bring the component to cool down
completely before measuring.
Use the tester to measure
the resistance.
Use the tester to measure
the resistance.
- Bring the component to cool down
completely before measuring.
Use the tester to measure
the resistance.
- Bring the component to cool down
completely before measuring.
Use the tester to measure
the resistance.
- Bring the component to cool down
completely before measuring.
Use the tester to measure
the resistance.
Use the tester to measure
the resistance.
Use the tester to measure
the resistance.
- Bring the component to cool down
completely before measuring.
Use the tester to measure
the resistance.
Components Diagnosing methods and criteria Location
Mechanical
compartment
Mechanical
compartment
Electrical
equipment box
Mechanical
compartment
Mechanical
compartment
Freezing
compartment
Refigerating
compartment
Between the
upper and the
lower doors
Electrical
equipment box
Lower EVAP
EVAP
Measuring point
Primary iwre
Secondary wire
Normal
Approx 10~500
3~20
Abnormal
0 and
∞Ω
Measuring point
A B contact point
When the switch is on
by the contact
Normal
Approx 200M
Abnormal
0 and
∞Ω
Measuring point
Bimetal terminal
Temperature fuse
terminal
Normal
Approx 200M
Abnormal
∞Ω~ ∞Ω
Measuring point
Between terminals
Temperature fuse
terminal
Normal
Approx 200
Approx 10Ω~300
Abnormal
0 and
∞Ω
Normal
Approx ∞Ω~㏀
Abnormal
0 and ∞Ω
Normal
Approx 10 ~ 80
Abnormal
0 and ∞Ω
Normal
Approx 200
Abnormal
0 and ∞Ω
Normal
Approx 100Ω~20
Abnormal
0 and ∞Ω
Normal
Approx 10Ω~20
Abnormal
0 and ∞Ω
Normal
Approx 3㏀~6
Abnormal
MΩ~ ∞Ω
11. Exploded View & Parts List
16
SR-21/24 NME(WME)
11-1 Freezing compartment
6
9
7
8
10
26
11
12
13
14
15
16
24
16
18
19
20
20
4
23
22
21
3
25
2
1
17
SR-21/24 NME(WME)
NO CODE-NO Iterms Specifications
N-SAFETY
110-127V/60Hz
SR-21
NME
SR-24
NME
SR-21
NME
SR-24
NME
SR-21
NME
SR-24
NME
SR-21
NME
SR-24
NME
SR-21
NME
SR-24
NME
220V/50Hz 230V/50Hz 230V/50Hz 230V/50Hz
Safety Asstrlia
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
2
1
-
-
1
-
1
1
1
-
1
1
1
1
-
1
-
1
1
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
2
1
-
-
1
-
1
1
1
-
1
1
1
1
-
1
-
1
1
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
2
-
1
-
1
-
1
1
1
-
1
1
1
1
1
-
-
1
1
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
2
-
1
-
1
-
1
1
1
-
1
1
1
1
1
-
-
1
1
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
2
-
-
1
1
-
1
1
1
-
1
1
1
1
1
-
-
1
1
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
2
-
-
1
1
-
1
1
1
-
1
1
1
1
1
-
-
1
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
1
2
-
-
1
-
1
1
1
1
-
1
1
1
1
1
-
-
1
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
1
2
-
-
1
-
1
1
1
1
-
1
1
1
1
1
-
-
1
1
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
2
-
-
1
1
-
1
1
-
1
1
1
1
1
-
-
1
1
1
1
1
1
1
1
1
1
1
1
1
-
1
1
1
-
2
-
-
1
1
-
1
1
-
1
1
1
1
1
-
-
1
1
1
1 DA61-70264A SUPT-TRAY ICE HIPS
2 DA67-00449A CASE TRAY ICE ASSY SAMSUNG
3 DA67-20321B SHELF FREEZER GPPS
4 DA67-40329A TRAY ICE B PP
5 DA67-20323A SHELF FREEZER SUB GPPS
6 DA64-00363A KNON F-THERMO HIPS
7 DA39-20410A WIRE HARMESS THERMO 110~240V
8 DA47-10167A THERMOSTAT MARCOT 8032
9 6002-000470 SCREW TAP, TH M4.0, L10
10 DA72-40478A COVER EVAP REAR FOAM, PS
DA72-40478B COVER EVAP REAR FOAM,VO
11 DA61-20149A SPRING FAN STS27WR
12 DA31-20138A FAN ABS
13 DA71-50233A BRACKET MOTOR ABS
DA71-50233B BRACKET MOTOR VO
14 DA63-40289A GROMMET FAN MOTOR NBR
15 DA31-10109H MOTOR FAN 115V/60HZ
DA31-10109G MOTOR-FAN 220V/50~60HZ
DA31-10109J MOTOR-FAN 1240V/50HZ
16 DA63-1105A COVER MOTOR PP
DA63-11051B COVER MOTOR VO
17 DA60-10104B SCREW TAP, TH P15.0,L13
18 DA59-40243A EVPAPORATOR SR-21/24NM, YOOWON
19 DA47-10150E THERMO BIMETAL ASSY 125/150V
DA67-10150B THERMO BIMETAL ASSY AUSTALIA ONLY
20 DA63-11050A COVER AIR COLD HIPS, SC-93437R
21 DA67-20324B SHELF WIRE FRE NSWR10, SR-9343R
22 DA64-20206C TRIM SHELF FRE PVC, L397
23 6002-000526 SCREW TAP, TH M4.0, L12
24 DA47-20210A GLASS HETER 220~240V
DA47-20210B GLASS HETER 110~127V
DA47-20210C GLASS HETER 240V(AUS)
25 DA67-40328A TRAY ICE CUBE GPPS, SC-94452M
26 COVER-EVAP, FRONT PP
11-2 Refrigerating compartment
18
SR-21/24 NME(WME)
11
12
17
15
16
9
4
3
2
1
10
17
13
14
6
7
8
5
19
SR-21/24 NME(WME)
1 DA72-40482A Ins-Damper B FOAM PS
2 DA67-10264B Case Damper Therm-Ass 705-E9C
3 DA72-40476A Ins-Damper A FOAM PS
4 DA64-0034A Knob-Thermo Damper ABS
5 DA63-00679A Cover Damper Ref PP
6 DA47-40119A Lam Holder
E17-, 110~240V, N-safety
DA47-40112L Lam Holder
E14-, 220~240V, safety
7 DA63-11052A Cover Lamp Ref GPPS
8 4713-000185 Lamp Incandescent
E17-, 110~127V
4713-001037 Lamp Incandescent E17-, 220~240V
4713-000213 Lamp Incandescent E14,220~240V,Safety
9 DA68-00346A Label Grommet PVC
10 DA34-10108D Switch Door 300/125V, SSD-5
11 DA67-40326A Tray Chil Room GPPS
DA67-40326B- Tray Chil Room SAN-Bio
12 DA63-00677A Cover Chil Room Gpps, Screen E-Type
13 DA67-20326B Shelf Wire Ref MSWR10
14 DA64-20206D Trim Shelf Ref PVC
15 DA63-11053A Cover Tray Vegetable GPPS
16 DA67-00448A Tray Vegetable GPPS, Screen E-Type
17 DA67-20322A Shelf Ref GPPS
18 DA67-10465A Contorol Humidity Veg HIPS
NO CODE-NO Iterms Specifications
N-SAFETY
110-127V/60Hz
SR-21
NME
SR-24
NME
SR-21
NME
SR-24
NME
SR-21
NME
SR-24
NME
SR-21
NME
SR-24
NME
SR-21
NME
SR-24
NME
220V/50Hz 230V/50Hz 230V/50Hz 230V/50Hz
Safety Asstrlia
1
1
1
1
1
1
-
1
1
-
-
1
1
1
-
1
-
-
1
1
1
1
1
1
1
1
1
1
-
1
1
-
-
1
1
1
-
1
-
-
1
1
1
1
1
1
1
1
1
1
-
1
-
1
-
1
1
1
-
1
-
-
1
1
1
1
1
1
1
1
1
1
-
1
-
1
-
1
1
1
-
1
-
-
1
1
1
1
1
1
1
1
1
-
1
1
-
1
-
1
1
1
-
1
-
-
1
1
1
1
1
1
1
1
1
-
1
1
-
1
-
1
1
1
-
1
-
-
1
1
1
1
1
1
1
1
1
1
-
1
-
-
1
1
1
1
-
1
-
-
1
1
1
1
1
1
1
1
1
1
-
1
-
-
1
1
1
1
-
1
-
-
1
1
1
1
1
1
1
1
1
1
-
1
-
1
-
1
1
-
1
1
-
-
1
1
1
1
1
1
1
1
1
1
-
1
-
1
-
1
1
-
1
1
-
-
1
1
1
1
Option Parts
11-3 Door parts
20
SR-21/24 NME(WME)
1
2
9
3
3
4
5
6
6
8
7
11
10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

Samsung SR-26NME User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI