T & S Brass & Bronze Works MPX-2DCN-08-CR Datasheet
- Type
- Datasheet
8"
[203mm]
7 15/16"
[202mm]
10 5/16"
[262mm]
[274mm]
10 3/4"
8"
[203mm]
(Remove Compression
Nut for 1/2" NPSM Male)
Inner Hose & Handle
Hose w/ Polyurethane
24" Stainless Steel
B-0024-H
Flow Rate
w/ 1.42 GPM
Spray Valve
x 8" Riser
3/8" NPT
Finger Hook
004R
000364-40
Clarity
Not Shown For
Swing Nozzle
Bracket
6" Wall
B-0109-01
B-0107-035
Compression Fittings
for 5/8" Copper Tubing
Fits Decks up to
1 1/8"[29mm] Thick or
1 1/4"[32mm] Thick
By Removing Washer
25"
[636mm]
For Commercial Use Only
EPAct2005 Compliant
Note: Rough-In Requirement
1 1/2" [ 38mm] Hole
( 1 1/4" [ 32mm] Minimum)
Mounting
Surface
Cerama Cartridge &
Club Handle
Cerama Cartridges w/
Check Valves &
Club Handles w/ Indexes
Nozzle w/
B-PT Stream
Regulator
For Clarity
& Spray Valve Not Shown
Overhead Spring, Hose
060X
8" Swing
18" Long Flexible
Stainless Steel
Supply Hoses
of
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
Travelers Rest, SC 29690
REG. #A2601
ISO #9001
03/30/09
KJG
MPX-2DCN-08-CR
1
Sheet:
Travelers Rest, SC: 800-476-4103
Spray Valve, 6" Wall Bracket, Club Handles & Ceramas
2 Saddleback Cove / P.O. Box 1088
Date:
Simi Valley, CA: 800-423-0150
Fax: 864-834-3518
www.tsbrass.com
JHB
JRM
Approved
Drawn Checked
1:8
8" Swing Nozzle, Compact Spring & Flex Hose, B-0107-035
Single Deck Mount Base Mixing Faucet, Add-On Faucet,
Easy Install Pre-Rinse Unit:
This Space for Architect/Engineer Approval
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
2
2
Sheet:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
Travelers Rest, SC 29690
Travelers Rest, SC: 800-476-4103
Fax: 864-834-3518
REG. #A2601
ISO #9001
MPX-2DCN-08-CR
Simi Valley, CA: 800-423-0150
2 Saddleback Cove / P.O. Box 1088
Approved
Drawn
Checked
NTS
of
2
www.tsbrass.com
Date:
Spray Valve, 6" Wall Bracket, Club Handles & Ceramas
KJG
03/30/09
Scale:
Product Specifications:
JRM
JHB
Easy Install Pre-Rinse Unit:
Single Deck Mount Base Mixing Faucet, Add-On Faucet,
8" Swing Nozzle, Compact Spring & Flex Hose, B-0107-035
22
ITEM
NO.
SALES NO. DESCRIPTION
1 B-0107-035 1.42 GPM Angled Spray Valve
2 010476-45 #27 Washer
3 000907-45 Spray Valve Hold Down Ring
4 002987-40 Grip Handle Assembly
5 010475-45 Washer, B-0100 Hose Barrel
6 B-0024-H2A 24" Flex Hose Less Handle
7 016795-45 Compact Spring
000821-40 Spring Body
B-0109-01 Bracket Assembly, 6" Wall
004R Finger Hook Assembly
000364-40 3/8" x 8" Riser
011278-25 Ceramic Cartridge RTC
012394-25
Ceramic Cartridge, RTC w/
Check Valve
012395-25
Ceramic Cartridge, LTC w/
Check Valve
15 001066-45 O-Ring
16 009304-41 Decorative Cap Insert, Cold
17 009331-41
Decorative Club Assembly,
Cold
18 007365-45 Lock Washer
19 000965-45 Lock Nut
20 012534-45 Flexible Connector Hose
21 000922-45 Lever Handle Screw
22 009332-41
Decorative Club Assembly,
Hot
23 017181-41
Decorative Club Assembly,
Blank
24 009285-40 Decorative Cap Insert, Blank
25 B-PT Stream Regulator Outlet
26 001048-45 Nozzle Tip Washer
27 060X 8" Swing Nozzle
9
10
11
13
14
12
1
27
25
2
3
4
5
6
7
2
8
24
16
19
18
20
26
15
21
8
9
10
11
12
13
14
17
23
-
1
-
2
