Page is loading ...
i
MS-9A65
Industrial
Data Machine
ii
Preface MS-9A65
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document, but
no guarantee is given as to the correctness of its contents. Our products are
under continual improvement and we reserve the right to make changes without
notice.
Trademarks
All trademarks are the properties of their respective owners.
￭MSI® is a registered trademark of Micro-Star Int’l Co.,Ltd.
￭NVIDIA® is a registered trademark of NVIDIA Corporation.
￭AMD® is a registered trademark of AMD Corporation.
￭Intel® is a registered trademark of Intel Corporation.
￭Windows® is a registered trademark of Microsoft Corporation.
￭AMI® is a registered trademark of Advanced Micro Devices, Inc.
￭Award® is a registered trademark of Phoenix Technologies Ltd.
￭Realtek® is a registered trademark of Realtek Semiconductor Corporation.
Revision History
Revision Date
V1.0 2014/10
Technical Support
If a problem arises with your system and no solution can be obtained from
the user’s manual, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.
Visit the MSI website for technical guide, BIOS
updates, driver updates, and other information:
http://www.msi.com/service/download/
Contact our technical sta at:
http://support.msi.com/
iii
Preface MS-9A65
Safety Instructions
￭Always read the safety instructions carefully.
￭Keep this User’s Manual for future reference.
￭Keep this equipment away from humidity.
￭Lay this equipment on a reliable at surface before setting it up.
￭The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
￭Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
￭Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
￭Always Unplug the Power Cord before inserting any add-on card or
module.
￭All cautions and warnings on the equipment should be noted.
￭Never pour any liquid into the opening that could damage or cause electrical
shock.
￭If any of the following situations arises, get the equipment checked by
service personnel:
◯The power cord or plug is damaged.
◯Liquid has penetrated into the equipment.
◯The equipment has been exposed to moisture.
◯The equipment does not work well or you can not get it work according
to User’s Manual.
◯The equipment has dropped and damaged.
◯The equipment has obvious sign of breakage.
￭DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT
MAY DAMAGE THE EQUIPMENT.
iv
Preface MS-9A65
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
http://www.msi.com/html/popup/csr/evmtprtt_pcm.html
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be
disposed of as unsorted household waste. Please use the
public collection system to return, recycle, or treat them in
compliance with the local regulations.
Taiwan:
For better environmental protection, waste batteries should
be collected separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires special
handling when recycled or disposed of in California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.
v
Preface MS-9A65
CE Conformity
Hereby, Micro-Star International CO., LTD declares that this
device is in compliance with the essential safety requirements and other relevant
provisions set out in the European Directive.
FCC-A Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
Notice 1
The changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that
may cause undesired operation.
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes effect on
August 13, 2005, products of “electrical and electronic equipment”
cannot be discarded as municipal waste anymore and manufacturers of covered
electronic equipment will be obligated to take back such products at the end of
their useful life. MSI will comply with the product take back requirements at the
end of life of MSI-branded products that are sold into the EU. You can return
these products to local collection points.
vi
Preface MS-9A65
Japan JIS C 0950 Material
Declaration
A Japanese regulatory requirement, dened by specication JIS C 0950,
mandates that manufacturers provide material declarations for certain categories
of electronic products oered for sale after July 1, 2006.
http://www.msi.com/html/popup/csr/cemm_jp.html
http://tw.msi.com/html/popup/csr_tw/cemm_jp.html
日本JIS C 0950材質宣言
日本工業規格JIS C 0950により、2006年7月1日以降に販売される特定分野の
電気および電子機器について、製造者による含有物質の表示が義務付けられま
す。
http://www.msi.com/html/popup/csr/cemm_jp.html
http://tw.msi.com/html/popup/csr_tw/cemm_jp.html
India RoHS
This product complies with the "India E-waste (Management and Handling) Rule
2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1
weight % and 0.01 weight % for cadmium, except for the exemptions set in
Schedule 2 of the Rule.
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Türkiye EEE yönetmeliği
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Ukraine Restriction of Hazardous
Substances
The equipment complies with requirements of the Technical Regulation, approved
by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 №
1057, in terms of restrictions for the use of certain dangerous substances in
electrical and electronic equipment.
Україна обмеження на наявність небезпечних речовин
Обладнання відповідає вимогам Технічного регламенту щодо обмеження
використання деяких небезпечних речовин в електричному та електронному
обладнані, затвердженого постановою Кабінету Міністрів України від 3
грудня 2008 № 1057.
vii
Preface MS-9A65
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with
Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number
of hazardous substances in electronic and electric products.
Việt Nam RoHS
Kể từ ngày 01/12/2012, tất cả các sản phẩm do công ty MSI sản xuất tuân thủ
Thông tư số 30/2011/TT-BCT quy định tạm thời về giới hạn hàm lượng cho phép
của một số hóa chất độc hại có trong các sản phẩm điện, điện tử"
viii
Preface MS-9A65
Contents
Copyright Notice ............................................................................................ ii
Trademarks ................................................................................................... ii
Revision History ............................................................................................ ii
Technical Support .......................................................................................... ii
Safety Instructions .........................................................................................iii
Chemical Substances Information ............................................................... iv
Battery Information ....................................................................................... iv
CE Conformity ............................................................................................... v
FCC-A Radio Frequency Interference Statement ......................................... v
WEEE Statement .......................................................................................... v
Japan JIS C 0950 Material Declaration ........................................................ vi
India RoHS ................................................................................................... vi
Turkey EEE Regulation ................................................................................ vi
Ukraine Restriction of Hazardous Substances ............................................. vi
Vietnam RoHS .............................................................................................vii
1 Overview.......................................................................................1-1
Packing Contents .......................................................................................1-2
System Overview .......................................................................................1-3
System Specications ................................................................................1-6
2 Getting Started .............................................................................2-1
Installation Tools .........................................................................................2-2
System Setup ............................................................................................. 2-3
3 BIOS Setup ................................................................................... 3-1
Entering Setup ...........................................................................................3-2
The Menu Bar ............................................................................................3-4
Main ...........................................................................................................3-5
Advanced ...................................................................................................3-6
Boot .......................................................................................................... 3-11
Security ....................................................................................................3-12
Chipset .....................................................................................................3-16
Power .......................................................................................................3-17
Save & Exit ...............................................................................................3-18
ix
Preface MS-9A65
4 MSI HIDAC Utility ......................................................................... 4-1
Activating the Utility .................................................................................... 4-2
Watchdog ...................................................................................................4-2
System Info. ...............................................................................................4-3
HW Monitor ................................................................................................4-3
Alarm Settings ............................................................................................ 4-4
Alarm Logs .................................................................................................4-4
Appendix WDT ................................................................................. A-1
WDT Sample Code ................................................................................... A-2
1-1-1
Thank you for choosing the WindBOX, an excellent industrial computer
system from MSI. The WindBOX eliminates the noise and the risk of
fan’s failure by adopting wide heatsink as fanless solution. It supports
various scenarios like digital signage, thin client, and POS with
affordableexpenditure, which not only meets the demand of Industrial
applications but also fulllsthe needs of companies, governments, and
in-stitutes for general applications.
1 Overview
1-2
Overview MS-9A65
MS-9A65 System
Power Adapter
Power Cord
VESA Mount Plate Wireless LAN Antenna
Driver/Utility Disk
Packing Contents
■Please contact us immediately if any of the item is damaged or missing.
■The picture is for your reference only and your packing contents may slightly vary
depending on the model you purchased.
1-3
Overview MS-9A65
System Overview
hSystem I/O & Controls - Left
3 4 5 6 71 2
hSystem I/O & Controls - Right
98 10 2 11 12
8
1-4
Overview MS-9A65
1Antenna Connector (Optional)
This connector allows you to connect an external antenna for wireless LAN.
Users may nd one antenna connector on the bottom I/O panel and two on the
left and right sides of the system.
2USB 2.0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such as key-
board, mouse, or other USB-compatible devices. It supports up to 480Mbit/s
(Hi-Speed) data transfer rate.
3USB 3.0 Port
The USB 3.0 port is backward-compatible with USB 2.0 devices. It supports up
to 5Gbit/s (SuperSpeed) data transfer rate.
4HDMI-Out Port
The High-DenitionMultimedia Interface (HDMI) is an all-digital audio/video
interface capable of transmitting uncompressed streams. HDMI supports all
TV format, including standard, enhanced, or high-denitionvideo, plus multi-
channel digital audio on a single cable.
5System Power Button
Press the switch to turn the power supply on or off.
6RS-232/422/485 Serial Port
The serial port is a 16550A high speed communications port that sends/re-
ceives 16 bytes FIFOs. It supports barcode scanners, barcode printers, bill
printers, credit card machine, etc.
719V DC Power Jack
Power supplied through this jack supplies power to the system.
8RJ45 LAN Jack
The standard RJ-45 LAN jack is provided for connection to the Local Area Net-
work (LAN). You can connect a network cable to it.
9Headphone Jack (Green)
This connector is provided for headphones or speakers.
10 Microphone Jack (Pink)
This connector is provided for microphones.
1-5
Overview MS-9A65
11 DVI-I Port
The DVI-I (Digital Visual Interface-Integrated) connector allows you to connect
an LCD monitor. It provides a high-speed digital interconnection between the
computer and its display device. To connect an LCD monitor, simply plug your
monitor cable into the DVI connector, and make sure that the other end of the
cable is properly connected to your monitor (refer to your monitor manual for
more information.)
12 Antenna Connector
This connector allows you to connect an external antenna for wireless LAN.
Users may nd one antenna connector on the bottom I/O panel and two on the
left and right sides of the system.
1-6
Overview MS-9A65
System Specications
Processor
■Intel Bay trail D processor
Memory
■ Max. 8GB DDR3L 1333MHz SO-DIMM
LAN
■ 2 * Intel I210-AT Gbe LAN
Audio
■ ALC887-VD2-CG co-lay ALC888S Audio codec
Storage
■1 * SATA II Port
■1 * mSATA Slot (share with mini-PCIe)
System I/O & Controls
■2 * Antenna Connectors
■ 1 * 19V DC-In Power Jack
■1 * DVI-I Port
■ 1 * RS-232/422/485 Serial Port
■ 2 * RJ45 LAN Jacks
■ 2 * USB 2.0 Ports
■ 1 * USB 3.0 Port
■1 * HDMI out put Connector
■1 * Headphone Jack
■1 * Microphone Jack
■1 * System Power Button
Expansion Slot
■2 * mini-PCIe Slots
■1 * SIM Card socket
1-7
Overview MS-9A65
Certication
■Safety: TUV, CB, UL
■EMI: FCC Class A/ CE / C-Tick / BSMI / VCCI
■RoHS Compliant
Power Supply
■ 65 Watt AC/DC Adapter
■ Input: 100-240V~, 1.5A, 50-60Hz
■ Output: 19V 3.42A MAX
■ Each COM port outputs 0.5A/Maximum
OS Support
■ Windows 8 & 8.1 32/64 Bit
■ Windows 7 64 Bit
Environmental
■Operation Temperature:
- 0 ~ 40°C (w/ HDD、DC Adaptor)
- -10 ~ 50°C (w/ HDD、Industrial DC Adaptor)
- -10 ~ 60°C (w/ SSD、Industrial DC Adaptor)
■ Storage Temperature: -20 ~ 80°C
■ Relative Humidity: 0 ~ 90%, non-condensing
1-8
Overview MS-9A65
1-2-1
This chapter provides you with the information on hardware setup
procedures. While connecting peripheral devices, be careful in holding
the devices and use a grounded wrist strap to avoid static electricity.
2 Getting Started
2-2
Getting Started MS-9A65
Installation Tools
A Phillips (crosshead) screwdriver and a athead screw-
driver, can be used to do most of the installation. Choose
one with a magnetic head would be better.
Pliers, can be used as an auxiliary tool to connect some con-
nectors or cables.
Forceps, can be used to pick up tiny screws or set up the
jumpers.
Rubber gloves, can prevent yourself from being incised and
suffering the static charge.
2-3
Getting Started MS-9A65
System Setup
Step 1:
Locate the VESA mount screw holes on the back of the LCD monitor.
Step 2:
Fasten the VESA mount plate to the monitor with the supplied screws.
/