MOBILE+ MB-TVB4220 Owner's manual

  • I've reviewed the provided instructions for the MOBILE+ TV mounts, models MB-TVB4220 and MB-TVB5535. This document details the installation process, highlighting important safety considerations and the mount's compatibility with 14"-42" screens, supporting up to 20kg. I'm ready to address any questions or concerns you might have regarding these instructions or the device.
  • What is the maximum screen size this mount supports?
    What is the maximum weight this mount can hold?
    Where should this product be used?
35kg
INSTRUCTIONS
CONSEJOS
26"-65"
MB-TVB5535
20kg
INSTRUCTIONS
TIPS!
Disclaimer:improper assembly or installation may result in injury or death,
destruction of property.Please read this installation manual
carefully before installation Information.
1.
The product must be installed by professionals.
2.
If you do not understand, please contact a qualified local installer.
3.
If the product is abnormal or missing, please do not assemble or install it.
Please contact the local dealer get help.
4.
This product is suitable for 14"-42" LCD/plasma screen, and can
bear 20kg/44lbs.
5.
This product is used on solid wood wall column or solid wall.
6.
For safety reasons, please confirm that the wall of the
installation product should bear the combined weight of the
TV set, bracket and accessories three times as much.If the expansion tube
on the wall is found to be loose during installation, please stop the
installation.
7.
This product can only be used for display in this range,
please do not use for other purposes.
8.
The manufacturer shall not be responsible for the damage to the vertical
wall caused by unloaded or accidental load.
9.
The manufacturer hereby declares that it is not liable for any damage or
damage caused by the installation not in accordance with the requirements
responsibility.
14"-42"
A M6x45mm(3pcs)
D
M4x10mm(4pcs)
M5x10mm(4pcs)
M6x10mm(4pcs)
B Ø6xØ16x1.5mm(3pcs)
C 10x50mm(3pcs)
E
M6x16mm(1pcs)
1pcs
F
M6(1pcs)
Step 1
wall
drillØ10x50mm C
Drill mounting holes on the wall according to the hole position of the wall mounting plate, and install the expansion pipe in
Step 2
E
F
Use the carriage screw to pass through the machine board and
the adjustment plate, and screw the club knob
Step 3
wall
B A
Note: Please pass through self-tapping screws(A) into
the gasket(B)to completely close the wall surface to
the wall. Tighten all the self-tapping screws. Do
not leave any gaps to avoid property damage and
personal injury.
Step 4
wall TV
Choose the appropriate screw to install
according to the actual situation of the TV
B TV
D
F
Knob position
Adjust the viewing angle (adjustable ±15°)
by tighten the knob to complete the installation.(F)
TV
/