WT065C LED29_48S/840 PSU L1200
WT065C LED41_68S/840 PSU L1500
WT065C LED29_48S/840 PSU L1200 TW1
WT065C LED41_68S/840 PSU L1500 TW1
WT065C
71
74
Dimensions
23/42
28/50
23/42
28/50
D
D
D
D
1207
1507
1214
1514
660-880
940-1160
660-880
940-1160
1.15
1.35
1.3
1.5
LED29_48S
14.2
222
36
22
60
37
LED41_68S
15
240
31
19
52
32
-The luminaire shall be installed by a qualified electrician and wired in accordance with the latest
IEE electrical regulations or the national requirements. The light source contained in this luminaire
shall only be replaced by the manufacturer or his service agent or a similar qualified person.
-Do not store/install/use the luminaire in corrosive environment with hazardous substances,
e.g., sulphur, chlorine, phthalates etc.,or on the location where it is exposed to conductive dust,
heavily grease (esp. mineral oil or distillates, e.g., petroleum), heavily naphthenic treated with hydrogen.
-Do not install the luminaire on the location where it is exposed to direct sunlight. UV radiation will damage
the material over time, resulting in loss of waterproof sealing and IP65 rating.
-Do not stare into LED light beam.
L
A
L1200 TW1
L1500 TW1
L
L1200
L1500
A
Lumen Select - option
Product Type XX Lumen YY Lumen (default)
LED29_48S 2900 Lumen
LED41_68S
4800 Lumen
4100 Lumen 6800 Lumen
XX Lu men YY Lumen
System light
output(Lm)
2900/4800
4100/6800
2900/4800
4100/6800
Cable gland MUST be installed before installation,
to safeguard IP protection.
-This product is not suitable for cold & humid storage areas, especially where obvious temperature gradients
are present, such as ventilation opening, door, etc.
7
CZ
30
45
8
foil needs to be removed
Diagonal mounting
8
Ø20.5
Min
Installation Dis(mm)
Min
installation distance(mm)
330
360
Type
L1200
L1500
(TW) Take the gland from the parts package (Non TW) Drill the hole, take the gland from the parts package
cross section for inner wires is 2.5mm2
/
