American Standard R420 User manual

Category
Faucets
Type
User manual

This manual is also suitable for

F89
© 2008 AS America Inc.
MODEL NUMBER:
R420 Two-Way In-Wall Diverter
1/2" NPT inlets/outlets. Less Handle.
R430 Three-Way In-Wall Diverter
1/2" NPT inlets/outlets. Less Handle.
NOTE: Cannot be used as a shut-off valve.
Two-Way In-Wall Diverter. 1/2" NPT inlets/outlets. Less Handle.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
ALL CONNECTIONS 1/2" NPT
R420 Shown
R420*
Three-Way In-Wall Diverter. 1/2" NPT inlets/outlets. Less Handle.
R430*
GENERAL DESCRIPTION:
In-Wall Diverters: Rotational control alternates water flow
between two (R420) or three (R430) different shower outlets
(i.e. showerhead, handspray, body side spray or tub spout).
Forged brass valve body. Mixed water inlet and two (R420) or
three (R430) outlets are marked on back of valve body. 1/2"
NPT connections on mixed water inlet and two (R420) or three
(R430) outlets. Stamped brass escutcheon. Tub port with
increased water flow (see chart).
NOTE: Cannot be used as a shut-off valve.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Removable Plaster Guard: Permits checking of valve
installation prior to installing trim parts.
Choice of Finishes: Wide range of durable finishes.
SUGGESTED SPECIFICATION
Two (three) way diverter shall feature a forged brass body with 1/2" NPT mixed water inlet and outlets. Fitting shall be
American Standard Model # R4_0.
Product
Number Description
ROUGH VALVE
BODIES
FINISHED
WALL
FINISHED
WALL
41mm MIN.
(1-5/8)
66mm MAX.
(2-5/8)
71mm
(2-3/4)
57mm HOLE SIZE
(2-1/4)
70mm
(2-3/4)
1660.200 and 1660.300 will accept the following handles:
FLOW RATE - R420
GALLONS PER MINUTE
INLET PRESSURE (PSI)
0
2
4
6
8
10
12
14
16 Tub Port
Port A
80706050403020
FLOW RATE - R430
GALLONS PER MINUTE
INLET PRESSURE (PSI)
0
2
4
6
8
10
12
14
16 Tub Port
Port A/B
80706050403020
* Rough and Trim must be ordered separately.
Meets the American Disabilities Act
Guidelines and ANSI A117.1
Requirements for the physically
challenged.
T506.700
AVAILABLE TRIM KITS
T373.700 T373.702 T203.700 T555.700
Enfield Lever Enfield Cross Ceratherm II Town Square
Moments
Amarilis-Series:
T000.441 T000.431
Metal Lever Perfume Bottle
T000.541
Metal Lever
T064.700
One
T010.700 T005.700
Green Tea Copeland
ROUGH VALVES
IN-WALL DIVERTER VALVES
MODEL NUMBER:
R420 Two-Way In-Wall Diverter
1/2" NPT inlets/outlets. Less Handle.
R430 Three-Way In-Wall Diverter
1/2" NPT inlets/outlets. Less Handle.
NOTE: Cannot be used as a shut-off valve.
Two-Way In-Wall Diverter. 1/2" NPT inlets/outlets. Less Handle.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
ALL CONNECTIONS 1/2" NPT
R420 Shown
R420*
Three-Way In-Wall Diverter. 1/2" NPT inlets/outlets. Less Handle.
R430*
GENERAL DESCRIPTION:
In-Wall Diverters: Rotational control alternates water flow
between two (R420) or three (R430) different shower outlets
(i.e. showerhead, handspray, body side spray or tub spout).
Forged brass valve body. Mixed water inlet and two (R420) or
three (R430) outlets are marked on back of valve body. 1/2"
NPT connections on mixed water inlet and two (R420) or three
(R430) outlets. Stamped brass escutcheon. Tub port with
increased water flow (see chart).
NOTE: Cannot be used as a shut-off valve.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Removable Plaster Guard: Permits checking of valve
installation prior to installing trim parts.
Choice of Finishes: Wide range of durable finishes.
SUGGESTED SPECIFICATION
Two (three) way diverter shall feature a forged brass body with 1/2" NPT mixed water inlet and outlets. Fitting shall be
American Standard Model # R4_0.
Product
Number Description
ROUGH VALVE
BODIES
FINISHED
WALL
FINISHED
WALL
41mm MIN.
(1-5/8)
66mm MAX.
(2-5/8)
71mm
(2-3/4)
57mm HOLE SIZE
(2-1/4)
70mm
(2-3/4)
1660.200 and 1660.300 will accept the following handles:
FLOW RATE - R420
GALLONS PER MINUTE
INLET PRESSURE (PSI)
0
2
4
6
8
10
12
14
16 Tub Port
Port A
80706050403020
FLOW RATE - R430
GALLONS PER MINUTE
INLET PRESSURE (PSI)
0
2
4
6
8
10
12
14
16 Tub Port
Port A/B
80706050403020
* Rough and Trim must be ordered separately.
Meets the American Disabilities Act
Guidelines and ANSI A117.1
Requirements for the physically
challenged.
T506.700
AVAILABLE TRIM KITS
T373.700 T373.702 T203.700 T555.700
Enfield Lever Enfield Cross Ceratherm II Town Square
Moments
Amarilis-Series:
T000.441 T000.431
Metal Lever Perfume Bottle
T000.541
Metal Lever
T064.700
One
T010.700 T005.700
Green Tea Copeland
F90
© 2008 AS America Inc.
ROUGH VALVES
IN-WALL DIVERTER VALVES
MODEL NUMBER:
R420 Two-Way In-Wall Diverter
1/2" NPT inlets/outlets. Less Handle.
R430 Three-Way In-Wall Diverter
1/2" NPT inlets/outlets. Less Handle.
NOTE: Cannot be used as a shut-off valve.
Two-Way In-Wall Diverter. 1/2" NPT inlets/outlets. Less Handle.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
ALL CONNECTIONS 1/2" NPT
R420 Shown
R420*
Three-Way In-Wall Diverter. 1/2" NPT inlets/outlets. Less Handle.
R430*
GENERAL DESCRIPTION:
In-Wall Diverters: Rotational control alternates water flow
between two (R420) or three (R430) different shower outlets
(i.e. showerhead, handspray, body side spray or tub spout).
Forged brass valve body. Mixed water inlet and two (R420) or
three (R430) outlets are marked on back of valve body. 1/2"
NPT connections on mixed water inlet and two (R420) or three
(R430) outlets. Stamped brass escutcheon. Tub port with
increased water flow (see chart).
NOTE: Cannot be used as a shut-off valve.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Removable Plaster Guard: Permits checking of valve
installation prior to installing trim parts.
Choice of Finishes: Wide range of durable finishes.
SUGGESTED SPECIFICATION
Two (three) way diverter shall feature a forged brass body with 1/2" NPT mixed water inlet and outlets. Fitting shall be
American Standard Model # R4_0.
Product
Number Description
ROUGH VALVE
BODIES
FINISHED
WALL
FINISHED
WALL
41mm MIN.
(1-5/8)
66mm MAX.
(2-5/8)
71mm
(2-3/4)
57mm HOLE SIZE
(2-1/4)
70mm
(2-3/4)
1660.200 and 1660.300 will accept the following handles:
FLOW RATE - R420
GALLONS PER MINUTE
INLET PRESSURE (PSI)
0
2
4
6
8
10
12
14
16 Tub Port
Port A
80706050403020
FLOW RATE - R430
GALLONS PER MINUTE
INLET PRESSURE (PSI)
0
2
4
6
8
10
12
14
16 Tub Port
Port A/B
80706050403020
* Rough and Trim must be ordered separately.
Meets the American Disabilities Act
Guidelines and ANSI A117.1
Requirements for the physically
challenged.
T506.700
AVAILABLE TRIM KITS
T373.700 T373.702 T203.700 T555.700
Enfield Lever Enfield Cross Ceratherm II Town Square
Moments
Amarilis-Series:
T000.441 T000.431
Metal Lever Perfume Bottle
T000.541
Metal Lever
T064.700
One
T010.700 T005.700
Green Tea Copeland
  • Page 1 1
  • Page 2 2

American Standard R420 User manual

Category
Faucets
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI