Schneider Electric R10128GB Wless Input/Output Unit Single Channel XPA-IN-14011-APO Instruction Sheet

Type
Instruction Sheet

Schneider Electric R10128GB Wless Input/Output Unit Single Channel XPA-IN-14011-APO

The Schneider Electric R10128GB Wless Input/Output Unit Single Channel XPA-IN-14011-APO is a wireless interface that offers one monitored input circuit and one relay output. It can be used for controlling fire doors, fire dampers, smoke vents, and other fire engineering applications.

Capabilities:

  • Wireless communication with the FX ALC loop
  • Monitored switch circuit
  • Capable of switching up to 30 V at 1 A
  • Five-year battery life using alkaline Panasonic Powerline or Varta Industrial AA batteries

Schneider Electric R10128GB Wless Input/Output Unit Single Channel XPA-IN-14011-APO

The Schneider Electric R10128GB Wless Input/Output Unit Single Channel XPA-IN-14011-APO is a wireless interface that offers one monitored input circuit and one relay output. It can be used for controlling fire doors, fire dampers, smoke vents, and other fire engineering applications.

Capabilities:

  • Wireless communication with the FX ALC loop
  • Monitored switch circuit
  • Capable of switching up to 30 V at 1 A
  • Five-year battery life using alkaline Panasonic Powerline or Varta Industrial AA batteries
Wless Input/Output
Unit Single Channel
XPA-IN-14011-APO
Instruction Sheet
R10128GB0
2 R10128GB0
Schneider Electric Fire & Security Oy
Sokerilinnantie 11 C
FI-02600 Espoo, Finland
Tel: +358 10 446 511
Website: www.schneider-electric.com
Document number: R10128GB0
Published: 13.05.2019
© 2018 Schneider Electric. All Rights Reserved. This information is only to be used as guidance. Subject to changes and errors.
Contents
R10128GB0 3
Contents
1 Wless Input/Output Unit Single Channel XPA-IN-14011-APO ............ 4
1.1 ALC Compatible XP Wireless Fire Detection Products ............................................................... 4
1.2 Schematic Diagram & Wiring Connections .................................................................................. 4
1.3 System principle ........................................................................................................................... 5
1 Wless Input/Output Unit Single Channel XPA-IN-14011-APO
4 R10128GB0
1 Wless Input/Output Unit Single Channel XPA-
IN-14011-APO
The Wireless Input/Output Unit (FFS06726024) is a radio based interface and offers one
or two monitored input circuits and one or two relay outputs. It can be used for controlling
fire doors, fire dampers, smoke vents and other fire engineering applications.
The Wireless Input/Output Unit can be used in failsafe operation. The product is tested
and approved to EN 54-18.
Wireless
Monitored switch circuit
Capable of switching up to 30 V at 1 A
Five year battery life using alkaline Panasonic® Powerline or Varta® Industrial
AA batteries
1.1 ALC Compatible XP Wireless Fire Detection Products
If wiring is a challenge in the building then XP wireless products are your solutions.
XP is a system in which individual detectors and other wireless devices communicate with
the FX ALC loop by radio signals. An interface is connected to the ALC loop in the same
way as any addressable interface.
Every wireless XP device is assigned an address and this address is recognised by the
Esmi Sense FDP and FX panel.
1.2 Schematic Diagram & Wiring Connections
1 Wless Input/Output Unit Single Channel XPA-IN-14011-APO
R10128GB0 5
1.3 System principle
Note! The maximum number of interfaces in a site is 5. If more than 5 interfaces
are needed, please contact the supplier.
Note! The interface takes one address in the ALC loop.
Note! The maximum number of addressable radio devices per interface is 31.
Note! A good system planning is absolutely necessary to ensure a reliable wireless
communication. The field strength must be checked with the survey tool.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Schneider Electric R10128GB Wless Input/Output Unit Single Channel XPA-IN-14011-APO Instruction Sheet

Type
Instruction Sheet

Schneider Electric R10128GB Wless Input/Output Unit Single Channel XPA-IN-14011-APO

The Schneider Electric R10128GB Wless Input/Output Unit Single Channel XPA-IN-14011-APO is a wireless interface that offers one monitored input circuit and one relay output. It can be used for controlling fire doors, fire dampers, smoke vents, and other fire engineering applications.

Capabilities:

  • Wireless communication with the FX ALC loop
  • Monitored switch circuit
  • Capable of switching up to 30 V at 1 A
  • Five-year battery life using alkaline Panasonic Powerline or Varta Industrial AA batteries

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI