fantastic furniture CODBCK4SH_1 Assembly Instructions

Brand: fantastic furniture

Model: CODBCK4SH_1

Type: Assembly Instructions

Version 1.0

Coda

Insert 1 Door Standard

fantasticfurniture.com.au

fantasticfurniture.com.au Page 2

Recommended weight capacity : 5kgs.

Looks like you’ve found

your Fantastic!

We’re thrilled you’ve chosen Fantastic Furniture

to help create a home you’ll love!

Love it? Share it!

Fantastic buy! Share how it looks at home on Instagram for

your chance to win a $250 Fantastic Furniture Gift Card!

@fantasticfurniture

Page 3

Read through the instructions carefully

before you begin.

Assembly Checklist

Identify and lay out all of the

components before you begin assembly.

Unless instructed, do not fully tighten

screws until the item is fully assembled.

! Never use power tools unless speciﬁcally instructed. They can damage your

components or hardware if used incorrectly.

! The most common mistakes made during assembly are using the wrong hardware or

getting components back to front.

! Always use a soft surface (such as carpet or cardboard) when assembling your

product to avoid scratching or damaging the surface of the product.

! Bulky items such as wardrobes and bunk beds should be assembled in the room they

will be used in as they may not ﬁt through a door once assembled.

! Never use any glue until you are certain that the parts belong together.

! Periodically check and re-tighten all fasteners. Check the product care label or

website for product care instructions.

! If you are having any diculties assembling your product, missing any hardware or

components please visit our website Help Centre for further assistance.

! Please see page 2 for any safety requirements or weight restrictions.

Make sure you have all the required tools.

Never use power tools unless instructed.

Useful Information

fantasticfurniture.com.au

Hardware pack

What you need

to assemble the product

Other tools you need:

Phillips head screwdriver;

DO NOT USE

Page 4

fantasticfurniture.com.au

Side Panel

(P1)

Back Panel

(P3)

Bottom Panel

(P4) Door

(P2)

Parts list

Side Panel (P1);

Door (P2);

Back Panel (P3);

Bottom Panel (P4);

6 x Dowels

(H1)

2 x Cam Bolts

(H3)

2 x Cam Nuts

(H4)

4 x Long

Screws (L30mm)

(H2)

12 x Timber

Screws

(H6)

1 x Rubber

Sticker

(H7)

2 x Hinges

(H5)

4 x Covers

(H9)

1 x Medium

Screw (L20mm)

(H8)

You will need

Step 1

You will need

Step 2

Page 5

fantasticfurniture.com.au

(P3)

2 x Cam Bolts

(H3)

Phillips head

screwdriver

Phillips head

screwdriver

Attach 2 x Cam Bolts (H3) into Back Panel (P3) using a Phillips head screwdriver.

(P4)

(P3)

This is how a cam nut works........

The head of the cam

bolt goes into the

open mouth of the

cam nut. You then

turn the cam nut so

it tightens over the

bolt.

2 x Cam Nuts

(H4)

2 x Dowels

(H1)

Insert 2 x Dowels (H1) into the holes of Back Panel (P3) as shown.

Insert 2 x Cam Nuts (H4) into the holes of Bottom Panel (P4).

Rotate the cam nuts so the arrows point towards the incoming cam bolts.

Attach Bottom Panel (P4) to Back Panel (P3),

then tighten the cam nuts using a Phillips head screwdriver.

Step 4

You will need

Step 3

Page 6

fantasticfurniture.com.au

(P4)

(P3)

(P1)

4 x Dowels

(H1)

4 x Long

Screws (H2)

Phillips head

screwdriver

Insert 4 x Dowels (H1) into the holes of Back Panel (P3) and Bottom Panel (P4) as shown.

Attach Side Panel (P1) to Back Panel (P3) and Bottom Panel (P4) with 4 x Long Screws (H2),

Tighten the screws using a Phillips head screwdriver.

H6 H6

H6H6

(P2)

Phillips head

screwdriver

4 x Timber

Screws (H6)

2 x Hinges

(H5)

Attach 2 x Hinges (H5) to Door (P2) with 4 x Timber Screws (H6).

Tighten Screws using a Phillips head screwdriver.

You will need

Step 5

Page 7

fantasticfurniture.com.au

Phillips head

screwdriver

(P4)

(P2)

(P1)

1 x Rubber

Sticker (H7)

8 x Timber

Screws (H6)

Attach Door (P2) to Side Panel (P1) with 8 x Timber Screws (H6) using a Phillips head screwdriver.

Stick 1 x Rubber Sticker (H7) to Bottom Panel (P4) as shown.

Step 6

Page 8

fantasticfurniture.com.au

Put the insert cabinet into the bookcase,

make sure the door of insert cabinet is ﬂush with the edge of shelf.

You will need

Step 7

Page 9

fantasticfurniture.com.au

Job Complete!

In the interest of our environment please dispose of all packaging thoughtfully.

Phillips head

screwdriver

4 x Covers

(H14)

1 x Medium

Screws (H13)

Open the door carefully.

Attach the cabinet to the bookcase with 1 x Medium Screw (H8) using a Phillips head screwdriver.

If you'd like to adjust the insert cabinet or remove it, please seal the holes with the Covers (H9).

Page 10

fantasticfurniture.com.au

TO ADJUST YOUR DOORS TO MAKE THE GAPS MORE EVEN (OPTIONAL).

STEP 1

STEP 3

STEP 2a MOVE DOOR IN

STEP 3a MOVE DOOR RIGHT STEP 3b MOVE DOOR LEFT

STEP 2b MOVE DOOR OUT

Side panel

Door

Open the door

Adjust the door move in or out

a little

To adjust the gap between

door and side panel

Loosen the screw indicated a little,

adjust the hinge to right position

(see step 2a & Step 2b),

then tighten the screw.

Loosen or tighten the screw

indicated a little to adjust the

gap between door and side

Panel (see step 3a & Step 3b)

Push the hinge back a little.

Turn the screw clockwise a

little as shown to move door

right.

Turn the screw counterclockwise

a little as shown to move door left.

Pull the hinge forward a little.

Side panel

Door

too big gap

Side panel

Door

too Small gap

Side panel

Door

Side panel

Door

projective line of

side panel

The door should

move right a little

Side panel

Door

projective line of

side panel

The door should

move left a little

Side panel

Door

Version 1.0

Coda

Bookcase 4 Shelf

fantasticfurniture.com.au

fantasticfurniture.com.au Page 2

Recommended weight capacity : 10kgs/shelf.

Looks like you’ve found

your Fantastic!

We’re thrilled you’ve chosen Fantastic Furniture

to help create a home you’ll love!

WARNING: ENSURE THE BRACKET IS ATTACHED TO

AVOID SERIOUS INJURY.

To avoid any serious or fatal injury, this product has been supplied

with a wall strap to prevent toppling. We strongly recommend that

this product is permanently ﬁxed to the wall or other suitable sur-

face. Connecting attachments for your wall are not included since

dierent surface materials require dierent attachments. Please seek

professional advice if you are in doubt of what wall connections to

use.

Love it? Share it!

Fantastic buy! Share how it looks at home on Instagram for

your chance to win a $250 Fantastic Furniture Gift Card!

@fantasticfurniture

Page 3

Read through the instructions carefully

before you begin.

Assembly Checklist

Identify and lay out all of the

components before you begin assembly.

Unless instructed, do not fully tighten

screws until the item is fully assembled.

! Never use power tools unless speciﬁcally instructed. They can damage your

components or hardware if used incorrectly.

! The most common mistakes made during assembly are using the wrong hardware or

getting components back to front.

! Always use a soft surface (such as carpet or cardboard) when assembling your

product to avoid scratching or damaging the surface of the product.

! Bulky items such as wardrobes and bunk beds should be assembled in the room they

will be used in as they may not ﬁt through a door once assembled.

! Never use any glue until you are certain that the parts belong together.

! Periodically check and re-tighten all fasteners. Check the product care label or

website for product care instructions.

! If you are having any diculties assembling your product, missing any hardware or

components please visit our website Help Centre for further assistance.

! Please see page 2 for any safety requirements or weight restrictions.

Make sure you have all the required tools.

Never use power tools unless instructed.

Useful Information

fantasticfurniture.com.au

Hardware pack

What you need

to assemble the product

Other tools you need:

Phillips Head Screwdriver;

Hammer

DO NOT USE

Page 4

fantasticfurniture.com.au

Top Panel

(P1)

Side Panel

(P2)

Side Panel

(P2)

Bottom Panel

(P6)

Shelf Panel

(P3)

Divider

(P5)

Divider

(P4)

Parts list

Top Panel (P1);

2 x Side Panels (P2);

Shelf Panel (P3);

Divider (P4);

Divider (P5);

Bottom Panel (P6);

8 x Dowels

(H1)

8 x Small

Dowels

(H2)

2 x Long

Dowels

(H10)

12 x Cam Bolts

(H3)

12 x Cam Nuts

(H4)

1 x Allen Key

(H7)

6 x Inside

Hexagonal Bolts

(H6)

1 x Screw

(H12)

1 x Restraint

Strap

(H11)

2 x Brackets

(H13)

8 x Covers

(H8)

2 x Long Screws

(H5)

4 x Plastic

Glides

(H9)

You will need

Step 1

You will need

Step 2

6 x Cam Bolts

(H3)

Phillips Head

Screwdriver

You will need

Step 3

Page 5

fantasticfurniture.com.au

(P1)

Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown.

(P2) x 2

4 x Cam Bolts

(H3)

Phillips Head

Screwdriver

Attach 2 x Cam Bolts (H3) into each Side Panel (P2) as shown.

(P3)

Attach 2 x Cam Bolts (H3) into Shelf Panel (P3) as shown.

2 x Cam Bolts

(H3)

Phillips head

screwdriver

You will need

Step 4

Phillips Head

Screwdriver

You will need

Step 5

Page 6

fantasticfurniture.com.au

H10

(P4)

(P3)

2 x Long

Dowels (H10)

2 x Long

Screws (H5)

Insert 2 x Long Dowels (H10) into the holes of Divider (P4) through Shelf Panel (P3)

as shown. Attach Divider (P4) to Shelf Panel (P3) with 2 x Long Screws (H5) using a

Phillips Head Screwdriver.

(P3)

(P5)

Insert 2 x Cam Nuts (H4) into the holes of Divider (P5).

Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.

Push Divider (P5) into place and then tighten the Cam Nuts using a Phillips Head

Screwdriver. Seal the holes with 2 x Covers (H8).

2 x Cam Nuts

(H4)

2 x Covers

(H8)

This is how a cam nut works........

The head of the cam

bolt goes into the

open mouth of the

cam nut. You then

turn the cam nut so

it tightens over the

bolt.

Phillips Head

Screwdriver

You will need

Step 6

You will need

Step 7

Page 7

fantasticfurniture.com.au

(P5)

(P4) (P3)

(P2)

2 x Cam Nuts

(H4)

2 x Small

Dowels (H2)

Insert 2 x Small Dowels (H2) into the holes of Shelf Panel (P3).

Insert 2 x Cam Nuts (H4) into the holes of Shelf Panel (P3).

Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.

Push Side Panel (P2) into place and then tighten the Cam Nuts using a Phillips Head Screwdriver.

(P3)

(P2)

2 x Cam Nuts

(H4)

2 x Small

Dowels (H2)

Insert 2 x Small Dowels (H2) into the holes of Shelf Panel (P3).

Insert 2 x Cam Nuts (H4) into the holes of Shelf Panel (P3).

Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.

Push Side Panel (P2) into place.

Tighten the Cam Nuts using a Phillips Head Screwdriver.

Phillips Head

Screwdriver

Phillips Head

Screwdriver

You will need

Step 9

You will need

Step 8

Page 8

fantasticfurniture.com.au

(P1)

(P2)

(P4)

Insert 4 x Dowels (H1) into the holes of Side Panels (P2).

Insert 2 x Small Dowels (H2) into the holes of Divider (P4).

Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2) and Divider (P4),

Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.

Attach Top Panel (P1) into place and then tighten the Cam Nuts using a Phillips

Head Screwdriver. Seal the holes with 6 x Covers (H8) as shown.

6 x Cam Nuts

(H4)

4 x Dowels

(H1)

6 x Covers

(H8)

2 x Small

Dowels (H2)

(P6)

(P5)

(P2)

H6 H7

Insert 4 x Dowels (H1) into the holes of Side Panels (P2).

Insert 2 x Small Dowels (H2) into the holes of Divider (P5).

Attach Bottom Panel (P6) to Side Panels (P2) and Divider (P5) with

6 x Inside Hexagonal Bolts (H6) using an Allen Key (H7).

1 x Allen Key

(H7)

6 x Inside

Hexagonal Bolts

(H6)

4 x Dowels

(H1)

2 x Small

Dowels (H2)

Phillips Head

Screwdriver

You will need

Step 10

You will need

Step 11

Page 9

fantasticfurniture.com.au

(P6)

Place glides 10mm from edge.

Attach 4 x Plastic Glides (H9) to the bottom of Bottom Panel (P6) with a Hammer.

4 x Plastic

Glides (H9) Hammer

We strongly advise that you use

the wall safety strap provided to

prevent the unit toppling

H11

H13

Wall

Screw

H12

Carefully turn the bookcase over to an upright position.

Attach 1 x Bracket (H13) securely to back of Top Panel (P1)

with 1 x Screw (H12) through the smaller hole.

Align the opposite wall Bracket about 20mm lower than the one attached to the bookcase

so the Bracket can't be seen.

Using appropriate wall connection ﬁxtures, secure the bracket to the wall

and thread the Restraint Strap through it.

Be careful not to over tighten the strap which would cause the unit to lean.

Phillips Head

Screwdriver

1 x Restraint

Strap (H11)

1 x Screw

(H12)

2 x Brackets

(H13)

Wall Screw and Wall Plug

which are not provided.

Please use appropriate

ﬁxtures for your wall.

Seek advice from a qualiﬁed

trades person on how to

attach this safety strap to

your speciﬁc wall.

Page 10

fantasticfurniture.com.au

Job Complete!

In the interest of our environment please dispose of all packaging thoughtfully.

fantastic furniture CODBCK4SH_1 Assembly Instructions