Ariens 72601200 User manual

Category
Snow throwers
Type
User manual
SNOW
ACCESSORIES
GUIDE
www.ariens.com
FRONT WEIGHT
KIT
CLEAN-OUT
KIT
NON-ABRASIVE SKID SHOE
KIT
CLEAN-OUT
KIT WITH
BRUSH
72406500
For use on Ariens® 932, 924, 926 and 921 Series Sno-Thro® models (except for 20" housings)
Adds 10 lbs. to the front of your Sno-ro to equalize weight distribution
and holds the scraper blade closer to the ground.
Enhances balance and adds extra weight to get a cleaner surface while throwing snow
Enhances operator comfort
72407100
For use on Ariens® 2-Stage Sno-Thro® models
Allows you to easily and safely remove snow and ice from the discharge chute and impeller.
Long reach and durable construction keeps hands away while cleaning the most tightly packed snow
Contoured handle prevents hands in gloves or mittens from losing their grip
Mounting bracket and hardware are included for easy installation
72600300 For use on Ariens® Sno-Thro® models
is innovation protects the decorative surfaces around the outside of your home
when using your Ariens Sno-ro.
Durable polyethylene material resists wear while providing protection from scratching
and marring the decorative surfaces surrounding your home
Two skid shoes and the hardware needed to install the kit are included
ACCESSORIES
72408100 For use on Ariens® 2-Stage Sno-Thro® models
is convenient tool is a shovel, a scraper and a brush all in one making it easy to
remove build up on your Ariens Sno-ro from a variety of winter conditions.
Brush feature allows user to clean off snow from outside of the Sno-Thro after use without
damaging finish
Includes scraper bar for chipping and scraping ice easily
Provides tool to safely remove snow and ice from the discharge chute and impeller
Comes complete with mounting bracket and hardware for easy installation if your Sno-Thro
is not currently equipped with one
Can be mounted to most other manufacturer’s snow throwers as an enhancement
All contents are subject to change. Please refer to the dealer extranet for the most up-to-date information and specific model fit up references.
TRACK DRIVE
CONVERSION KIT
CHUTE CRANK
KIT
ACCESSORIES
ARIENS SNOTHRO®
COVER
ELECTRIC START
KIT
72600500
For use on Ariens® 926 Series Sno-Thro® models
Convert your Ariens Sno-ro into a Track Drive unit. is innovative
positive-traction system design gives you undefeatable power and
traction and smooth maneuverability.
Perfect for use on slopes and intense winter conditions.
73203600 Compact and Single Stage – For use on Ariens® Compact & Single Stage units
with housings 26" or smaller.
72600200 Deluxe and Professional – For use on Ariens® Professional & Deluxe units with
housings 26" or larger.
Waterproof, washable and tear-resistant, this Ariens-branded cover protects your
Sno-ro when it is not in use.
Fabric has a canvas feel and is made of rugged 600 denier polyester with urethane backing
Two fully adjustable 1” polyester straps with a quick-release buckle
Large vent to encourage air flow and prevent moisture build-up
73203200 For use on Ariens® 932040, 932043, 932048, 932140
73900100 For use on Ariens® 939001, 939002
73800300 For use on Ariens 938010, 938015, 938016, 938019, 938305, 938400
For manual handle chute rotation Sno-thro models. is kit will convert this type
of chute rotation into a crank style rotation.
Places discharged snow with pinpoint accuracy
Chute rotates 220° from the operator position
72403600 For use on Ariens® Sno-Thro® models with a 4 Cycle 8 to 11.5 HP Tecumseh® Engine
72200600 For use on Ariens® Sno-Thro® models with a 4 Cycle 5 to 7.5 HP Tecumseh® Engine
73800100
For use on Ariens® Sno-Thro® models with a 2 Cycle Tecumseh® Engine
Makes it easy for family members to help clear snow by having your Sno-ro start
with the push of a button instead of the pull of a recoil rope.
Turn over the engine in even the coldest conditions when oil is thick and carburetors
are temperamental
Provides years of reliable and easy engine starting
www.ariens.com
DRIFT CUTTER
KITS
PROTECTIVE
FLOOR MAT
ACCESSORIES
72408000 For use on all 2-Stage Ariens Sno-Thro models
Extra roomy, rugged powder coated steel frame Deluxe Sno-ro Cab protects
against heavy snow, wind and snow blow back.
Fast installation, no drilling and installs with hand tools
Zip-open front fits over crank handles
Freeze-resistant super clear windows
Cab does not require weight kit
72100800 For use on 921 Series Deluxe Ariens Sno-Thro models except 921011 and 921014
Allows the operator to keep their hands warm on cold winter days with built-in
heated handle grips.
Keep warm on the coldest days
This low cost upgrade can help make the decision on unit purchase
73203100 For use on Ariens® 920, 924, 932 & 939 Series Sno-Thro® models
72406900 For use on Ariens® 921 & 926 Series Sno-Thro® models
Help your Sno-ro tackle drifting and packed snow. Extend the bars to cut drifts and
direct snow into the auger. Rotate the bars down and out of the way for regular use.
Wing knobs and integrated design allow you to install the bars yourself and adjust them
without the use of tools
Extends the reach of your Sno-Thro to cut the toughest snow down to size
Directs snow drifts into the auger housing for quick discharge
70706700 For use with most Ariens® Sno-Thro® models
Designed to provide a protective layer between your Sno-ro
and flooring surface during storage.
Durable rubber mat is made out of textured recycled materials and has a raised edge
to keep melting snow contained, preventing a hazardous, slippery floor
Floor surface is protected from gas, oil, rust spots and scratches
Mat is nine square feet, making it suitable for most Sno-Thro models
ARIEN BRANDED SNOTHRO®
CAB
HANDWARMER
ACCESSORY KIT
All contents are subject to change. Please refer to the dealer extranet for the most up-to-date information and specific model fit up references.
TECUMSEH
®
ENGINE
MAINTENANCE KITS
BRIGGS & STRATTON
®
ENGINE
MAINTENANCE KIT
ACCESSORIES
72601000 For use on all Ariens® Sno-Thro® models with Tecumseh® OHV Engines
72407900 For use on all Ariens Sno-Thro models with a Tecumseh® L-Head Engines
EACH KIT INCLUDES:
32oz. Winter Blend 4 cycle oil – specifically designed for hard working, air-cooled engines used in
cold climates
L-Head or OHV Spark Plug – Equivalent of a Champion RJ19LM or RN4C
Ultra-Fresh® Fuel Stabilizer – safe, non-toxic granular formula keeps gasoline fresh
Spare ignition key – Push/Pull key for Tecumseh® Engines
72100700
For use on all Ariens® Sno-Thro® models with Briggs & Stratton® OHV Engines
EACH KIT INCLUDES:
Ariens 32oz. 5W30 engine oil – specifically designed for hard working, air-cooled engines used in cold climates
Spark Plug – equivalent of a Champion QCIZYC
Ultra-Fresh® Fuel Stabilizer – safe, non-toxic granular formula keeps gasoline fresh
Spare ignition key – Push/Pull key for Briggs & Stratton® OHV engines
72000300
For use on all Sno-Tek models with LCT® Storm Force 208cc Engines
EACH KIT INCLUDES:
Ariens 32oz. 5W30 engine oil – specifically designed for hard working, air-cooled engines used
in cold climates
Spark Plug – equivalent of a Champion RN9YC
Ultra-Fresh® Fuel Stabilizer – safe, non-toxic granular formula keeps gasoline fresh
Spare ignition key – Push/Pull key for LCT® Storm Force 208cc engines
SNO-TEK™ ENGINE
MAINTENANCE KIT
MELTBUDDY
72601200 For use on all Ariens® Sno-Thro® models
Allows operators to clear snow and spread ice melt in a single pass. e MeltBuddy
has an easy-to-use hand trigger and large capacity hopper which allows operators
to drop ice-melt granules where needed.
Universal mounting for easy attachment on almost any manufacturer's snow blower
Durable high density polyethylene survives the most extreme winter conditions
Snap-locking hopper cover keeps blowing snow out and away from the ice melting product
of your choice
2009
©
2009 Ariens Company.
®
Registered trademark of Ariens Company.
Printed in U.S.A.
www.ariens.com
Phone: 1-800-472-8359
Email: info@ariens.com
ACCESSORIES
GUIDE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Ariens 72601200 User manual

Category
Snow throwers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI