SNOW
ACCESSORIES
GUIDE
www.ariens.com
FRONT WEIGHT
KIT
CLEAN-OUT
KIT
NON-ABRASIVE SKID SHOE
KIT
CLEAN-OUT
KIT WITH
BRUSH
72406500
For use on Ariens® 932, 924, 926 and 921 Series Sno-Thro® models (except for 20" housings)
Adds 10 lbs. to the front of your Sno-ro to equalize weight distribution
and holds the scraper blade closer to the ground.
■
Enhances balance and adds extra weight to get a cleaner surface while throwing snow
■
Enhances operator comfort
72407100
For use on Ariens® 2-Stage Sno-Thro® models
Allows you to easily and safely remove snow and ice from the discharge chute and impeller.
■
Long reach and durable construction keeps hands away while cleaning the most tightly packed snow
■
Contoured handle prevents hands in gloves or mittens from losing their grip
■
Mounting bracket and hardware are included for easy installation
72600300 For use on Ariens® Sno-Thro® models
is innovation protects the decorative surfaces around the outside of your home
when using your Ariens Sno-ro.
■
Durable polyethylene material resists wear while providing protection from scratching
and marring the decorative surfaces surrounding your home
■
Two skid shoes and the hardware needed to install the kit are included
ACCESSORIES
72408100 For use on Ariens® 2-Stage Sno-Thro® models
is convenient tool is a shovel, a scraper and a brush all in one making it easy to
remove build up on your Ariens Sno-ro from a variety of winter conditions.
■
Brush feature allows user to clean off snow from outside of the Sno-Thro after use without
damaging finish
■
Includes scraper bar for chipping and scraping ice easily
■
Provides tool to safely remove snow and ice from the discharge chute and impeller
■
Comes complete with mounting bracket and hardware for easy installation if your Sno-Thro
is not currently equipped with one
■
Can be mounted to most other manufacturer’s snow throwers as an enhancement
All contents are subject to change. Please refer to the dealer extranet for the most up-to-date information and specific model fit up references.
TRACK DRIVE
CONVERSION KIT
CHUTE CRANK
KIT
ACCESSORIES
ARIENS SNOTHRO®
COVER
ELECTRIC START
KIT
72600500
For use on Ariens® 926 Series Sno-Thro® models
Convert your Ariens Sno-ro into a Track Drive unit. is innovative
positive-traction system design gives you undefeatable power and
traction and smooth maneuverability.
■
Perfect for use on slopes and intense winter conditions.
73203600 Compact and Single Stage – For use on Ariens® Compact & Single Stage units
with housings 26" or smaller.
72600200 Deluxe and Professional – For use on Ariens® Professional & Deluxe units with
housings 26" or larger.
Waterproof, washable and tear-resistant, this Ariens-branded cover protects your
Sno-ro when it is not in use.
■
Fabric has a canvas feel and is made of rugged 600 denier polyester with urethane backing
■
Two fully adjustable 1” polyester straps with a quick-release buckle
■
Large vent to encourage air flow and prevent moisture build-up
73203200 For use on Ariens® 932040, 932043, 932048, 932140
73900100 For use on Ariens® 939001, 939002
73800300 For use on Ariens 938010, 938015, 938016, 938019, 938305, 938400
For manual handle chute rotation Sno-thro models. is kit will convert this type
of chute rotation into a crank style rotation.
■
Places discharged snow with pinpoint accuracy
■
Chute rotates 220° from the operator position
72403600 For use on Ariens® Sno-Thro® models with a 4 Cycle 8 to 11.5 HP Tecumseh® Engine
72200600 For use on Ariens® Sno-Thro® models with a 4 Cycle 5 to 7.5 HP Tecumseh® Engine
73800100
For use on Ariens® Sno-Thro® models with a 2 Cycle Tecumseh® Engine
Makes it easy for family members to help clear snow by having your Sno-ro start
with the push of a button instead of the pull of a recoil rope.
■
Turn over the engine in even the coldest conditions when oil is thick and carburetors
are temperamental
■
Provides years of reliable and easy engine starting
www.ariens.com
DRIFT CUTTER
KITS
PROTECTIVE
FLOOR MAT
ACCESSORIES
72408000 For use on all 2-Stage Ariens Sno-Thro models
Extra roomy, rugged powder coated steel frame Deluxe Sno-ro Cab protects
against heavy snow, wind and snow blow back.
■
Fast installation, no drilling and installs with hand tools
■
Zip-open front fits over crank handles
■
Freeze-resistant super clear windows
■
Cab does not require weight kit
72100800 For use on 921 Series Deluxe Ariens Sno-Thro models except 921011 and 921014
Allows the operator to keep their hands warm on cold winter days with built-in
heated handle grips.
■
Keep warm on the coldest days
■
This low cost upgrade can help make the decision on unit purchase
73203100 For use on Ariens® 920, 924, 932 & 939 Series Sno-Thro® models
72406900 For use on Ariens® 921 & 926 Series Sno-Thro® models
Help your Sno-ro tackle drifting and packed snow. Extend the bars to cut drifts and
direct snow into the auger. Rotate the bars down and out of the way for regular use.
■
Wing knobs and integrated design allow you to install the bars yourself and adjust them
without the use of tools
■
Extends the reach of your Sno-Thro to cut the toughest snow down to size
■
Directs snow drifts into the auger housing for quick discharge
70706700 For use with most Ariens® Sno-Thro® models
Designed to provide a protective layer between your Sno-ro
and flooring surface during storage.
■
Durable rubber mat is made out of textured recycled materials and has a raised edge
to keep melting snow contained, preventing a hazardous, slippery floor
■
Floor surface is protected from gas, oil, rust spots and scratches
■
Mat is nine square feet, making it suitable for most Sno-Thro models
ARIENS® BRANDED SNOTHRO®
CAB
HANDWARMER
ACCESSORY KIT
All contents are subject to change. Please refer to the dealer extranet for the most up-to-date information and specific model fit up references.
TECUMSEH
®
ENGINE
MAINTENANCE KITS
BRIGGS & STRATTON
®
ENGINE
MAINTENANCE KIT
ACCESSORIES
72601000 For use on all Ariens® Sno-Thro® models with Tecumseh® OHV Engines
72407900 For use on all Ariens Sno-Thro models with a Tecumseh® L-Head Engines
EACH KIT INCLUDES:
■
32oz. Winter Blend 4 cycle oil – specifically designed for hard working, air-cooled engines used in
cold climates
■
L-Head or OHV Spark Plug – Equivalent of a Champion RJ19LM or RN4C
■
Ultra-Fresh® Fuel Stabilizer – safe, non-toxic granular formula keeps gasoline fresh
■
Spare ignition key – Push/Pull key for Tecumseh® Engines
72100700
For use on all Ariens® Sno-Thro® models with Briggs & Stratton® OHV Engines
EACH KIT INCLUDES:
■
Ariens 32oz. 5W30 engine oil – specifically designed for hard working, air-cooled engines used in cold climates
■
Spark Plug – equivalent of a Champion QCIZYC
■
Ultra-Fresh® Fuel Stabilizer – safe, non-toxic granular formula keeps gasoline fresh
■
Spare ignition key – Push/Pull key for Briggs & Stratton® OHV engines
72000300
For use on all Sno-Tek models with LCT® Storm Force 208cc Engines
EACH KIT INCLUDES:
■
Ariens 32oz. 5W30 engine oil – specifically designed for hard working, air-cooled engines used
in cold climates
■
Spark Plug – equivalent of a Champion RN9YC
■
Ultra-Fresh® Fuel Stabilizer – safe, non-toxic granular formula keeps gasoline fresh
■
Spare ignition key – Push/Pull key for LCT® Storm Force 208cc engines
SNO-TEK™ ENGINE
MAINTENANCE KIT
MELTBUDDY™
72601200 For use on all Ariens® Sno-Thro® models
Allows operators to clear snow and spread ice melt in a single pass. e MeltBuddy
has an easy-to-use hand trigger and large capacity hopper which allows operators
to drop ice-melt granules where needed.
■
Universal mounting for easy attachment on almost any manufacturer's snow blower
■
Durable high density polyethylene survives the most extreme winter conditions
■
Snap-locking hopper cover keeps blowing snow out and away from the ice melting product
of your choice
2009
©
2009 Ariens Company.
®
Registered trademark of Ariens Company.
Printed in U.S.A.
www.ariens.com
Phone: 1-800-472-8359
Email: info@ariens.com
ACCESSORIES
GUIDE
/
