Chief FSBI2TB Installation guide

FSBI2TB
Chief
Brand
Chief
Model
FSBI2TB
Category
Wall & ceiling mounts accessories
Type
Installation guide

This manual is also suitable for

Chief FSBI2TB is a security mount designed for use with iPad 2 and iPad 3 mobile digital devices, allowing for secure installation in various locations. It features a durable construction with multiple security screws and a lockout bracket for added protection against theft or unauthorized access. The mount is compatible with Chief 100x100mm faceplates and can be attached to Centris or Kontour head mounts with the included hardware. It also includes a security cable cover to conceal and protect the power cable.

Chief FSBI2TB is a security mount designed for use with iPad 2 and iPad 3 mobile digital devices, allowing for secure installation in various locations. It features a durable construction with multiple security screws and a lockout bracket for added protection against theft or unauthorized access. The mount is compatible with Chief 100x100mm faceplates and can be attached to Centris or Kontour head mounts with the included hardware. It also includes a security cable cover to conceal and protect the power cable.

INSTALLATION INSTRUCTIONS
Security iPad
®
2 and 3 100x100 Mount
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FSBI2TB
FSBI2TB Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® and Centris® are registered trademarks of Milestone AV
Technologies. All rights reserved.
iPad® is a registered trademark of Apple Inc.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
IMPORTANT ! :
The FSBI2TB is designed for use with the
iPad 2 and iPad 3 mobile digital device models.
--SAVE THESE INSTRUCTIONS--
DIMENSIONS
DIMENSIONS: INCHES
[MILLIMETERS]
8.55
217.3
Installation Instructions FSBI2TB
3
LEGEND
TOOLS REQUIRED FOR INSTALLATION
PARTS
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
By Hand
A mano
Von Hand
Com a mão
A mano
Met de hand
À la main
5/32"
(security)
included
Security iPad Mount Hardware Kit
A (12)
08-32 x 1/4"
B (1)
5/32"
(security)
C (4)
M4 x 12mm
D (4)
M4 x 10mm
E (1)
10-24 x 1/4"
F(1)
[Lockout
bracket]
H (1)
[Security cable cover]
J (1)
[Security mount front]
K (1)
[Security mount back]
G (1)
M4 x 16mm
FSBI2TB Installation Instructions
4
ASSEMBLY AND INSTALLATION
NOTE:
The FSBI2TB is compatible with the iPad® 2 and iPad®
3 mobile digital device models alone, not mounted in a
case.
NOTE: The FSBI2TB mounts directly to a Chief 100x100mm
faceplate (not included).
Assembly
1. Lay security mount front (J) facedown.
2. Place iPad®2 or 3 (not included) facedown onto the mount
front (J). (See Figure 1)
Figure 1
3. Attach power cable (not included) to iPad digital device.
(See Figure 1)
4. Carefully place security mount back (K) over the iPad digital
device. (See Figure 2)
5. Fasten together using ten 08-32 x 1/4" button head security
screws (A). (See Figure 2)
Figure 2
6. Place power cable through notch on security cable cover (H)
and slide cover (H) into place on FSBI2TB. (See Figure 3)
7. Fasten cover (H) into place using two 08-32 x 1/4" button
head security screws (A). (See Figure 3)
Figure 3
2
2
iPad®2 or 3
(not included)
(J)
Power cable
3
5
4
4
(A) x 10
(K)
6
(H)
(A) x 2
Power
cable
Power cable notch
7
Installation Instructions FSBI2TB
5
Installation
NOTE: An optional lockout bracket (F) may be added when
attaching the FSBI2TB to either the Centris head or
Kontour head mount. (See Figure 4) or (See Figure 5).
Attaching to Centris Head Mount
1. Attach FSBI2TB to Centris head mount using four
M4x10mm button head security screws (D). (See Figure 4)
Proceed to Step 5.
Figure 4
Attaching to Kontour Head Mount
2. Attach FSBI2TB to Kontour head mount using four
M4x12mm button head security screws (C). (See Figure 5)
3. Reattach Kontour head to mount following instructions
included with mount.
4. Fasten one 10-24 x 1/4" button head security screw (E) into
back of Kontour head mount (See Figure 5)
Figure 5
5. OPTIONAL: Add padlock (not included) to optional lockout
bracket. (See Figure 6)
Figure 6
1
(D) x 4
FSBI2TB
Centris head
mount
OPTIONAL: Add lockout
bracket (F).
2
(C) x 4
4
(E) x 1
OPTIONAL: Add
lockout bracket (F)
using one M4x16mm
security screw (G).
5
OPTIONAL -
Add padlock
(not included)
FSBI2TB Installation Instructions
6
Installation Instructions FSBI2TB
7
FSBI2TB Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P 800.582.6480 / 952.225.6000
F 877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P +31 (0) 495 580 852
F +31 (0) 495 580 845
Asia Pacific A Office No. 1 on 12/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P 852 2145 4099
F 852 2145 4477
Chief Manufacturing, a products division
of Milestone AV Technologies
8800-002178 Rev03
2012 Milestone AV Technologies, a
Duchossois Group Company
www.chiefmfg.com
10/12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Chief FSBI2TB Installation guide

FSBI2TB
Chief
Brand
Chief
Model
FSBI2TB
Category
Wall & ceiling mounts accessories
Type
Installation guide
This manual is also suitable for

Chief FSBI2TB is a security mount designed for use with iPad 2 and iPad 3 mobile digital devices, allowing for secure installation in various locations. It features a durable construction with multiple security screws and a lockout bracket for added protection against theft or unauthorized access. The mount is compatible with Chief 100x100mm faceplates and can be attached to Centris or Kontour head mounts with the included hardware. It also includes a security cable cover to conceal and protect the power cable.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents