SHB7102/93
Bluetooth Stereo Headset
Specifications Product highlights
Connectivity
• Bluetooth profiles: A2DP, AVRCP, Handsfree,
Headset
• Bluetooth version: 1.2
• Maximum range: up to 33 feet / 10 m
• Bluetooth QD ID: B012309 (headset) B012308
(adapter)
Power
• Talk time: Up to 10 hrs
• Standby time: Up to 210 hrs
• Music playtime: 8 hr
• Rechargeable
• Battery Type: LI-Polymer
• Battery weight: 6.5g (headset) 6.5g (adapter)
Sound
• Magnet type: Neodymium
• Speaker diameter: 10 mm
Convenience
•Volume control
• Call Management: Answer/End Call, Reject Call,
Last number redial, Voice dial, Call Transfer,
Switch between call and music
Accessories
• Charger: USB charging cable included. No wall
outlet charger included.
Dimensions
• Product dimensions (WxDxH): 22x18x54 mm
(pendant)
• Product weight (g): 22 g (pendant)
Green Specifications
• Lead-free soldered product
Inner Carton
• Gross weight: 1.56 kg
• Inner carton (L x W x H): 19.6 x 19.4 x 24.9 cm
• Nett weight: 1.14 kg
• Tare weight: .42 kg
Outer Carton
• Gross weight: 7.15 kg
• Outer carton (L x W x H): 40.6 x 40 x 26.4 cm
• Nett weight: 4.56 kg
• Tare weight: 2.59 kg
Packaging dimensions
• Packaging dimensions (W x H x D):
17.8
x 21.8 x 6.2 cm
• Gross weight: .46 kg
• Nett weight: .38 kg
• Tare weight: .08 kg
•
Issue date 2008-11-15
Version: 2.0.4
12 NC: 8670 000 33679
EAN: 87 12581 36222 5
© 2008 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Bluetooth 3,5mm adapter incl.
Simply plug the 3.5mm Bluetooth audio adapter into the
standard headphone jack. The audio adapter picks up
your music player's audio signal and converts it into a
wireless Bluetooth signal that can be received by your
Bluetooth Headphones.
Bluetooth HSP/HFP compliant
Bluetooth is a cable replacement technology. Bluetooth is
a global standard, so Bluetooth devices of different
manufacturers can interoperate using shared Bluetooth
profiles. HSP (Handset Profile) and HFP (Handsfree
Profile) are the profiles required for typical Bluetooth
headset operations. If your mobile phone is compliant to
HSP or HFP (like virtually any Bluetooth enabled phone)
this headset will work with it. The Bluetooth word mark
and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by Koninklijke Philips Electronics N.V.
is under license.
Bluetooth Stereo (A2DP)
This Philips device fully supports Bluetooth Stereo (A2DP).
A2DP (Advanced Audio Distribution Profile) compliance
enables this headset to receive stereo music from any
Bluetooth device that is A2DP compliant. Therefore you
can use this headset with any compatible mobile phone,
PC, Bluetooth adapter, MP3 player etc. that supports
A2DP.
Digital stereo sound quality
The audio signal is transferred wirelessly as a digital
signal and is only converted to analog in the device itself.
This means that interference noise has less influence on
the sound quality than with analog technologies. The
sound playback will be true to the orignal recording and
sound source.
SwitchStream
With SwitchStream you will hear a ring tone in your
headset when you are receiving a call on your Bluetooth
enabled phone. You can then pick up the call from your
headset and return to your music after ending the call.
Never miss a a beat, never miss a call.
TailorMate headphone concept
With TailorMate you can use the headset pendant with
any 3.5mm jack headphone to match your style.
1
2
