Hasbro 85251 User manual

Type
User manual

This manual is also suitable for

ASSEMBLYFEATURESCLOSE PLAYSET
AGES 4
+
85393/85251 Asst.
®
Revenge of the Sith
Some assembly required.
No tools needed.
MUSTAFAR
DUEL
BATTLE SET
MUSTAFAR
DUEL
BATTLE SET
COMPOUND NET WEIGHT 2 OZ. (56g).
Open playset as
shown. Unfold panel
to support playset.
Attach vehicle.
Slide turret into place.
Attach dueling platform.
Some poses may require additional support.
Product and colors may vary.
© 2005 Lucasfilm Ltd. & ® or TM where indicated. All rights reserved.
®* and/or ™* & © 2005 Hasbro. All Rights Reserved.
® denotes Reg. U.S. Pat. & TM Office.
*
*
For more toy information visit: www.starwars.hasbro.com
P/N 6462910000
NONTOXIC CONFORMS TO ASTM D-4236
To remove compound from skin and surfaces, wash with soap and warm
water. Compound may stick to rugs, fabric and hair, and may stain some
wood surfaces. Care should be used when playing with the product.
Remove turret and slide
“lava” extruder into place.
Place “lava” in extruder. Push
plunger down to make the
“lava” ooze over the playset.
Detach lava skiffs. Place a gure
on each skiff. Place skiffs on “lava”
to make them surf down it.
Push in radar dish to make
dueling platform fall off, to
re-enact the movie scene!
Flip over panel in pit to reveal
Anakin’s robotic hand.
Attach gures to dueling disk.
Slide lever to make disk turn
and spin for dueling action.
Place gures on catapult.
Press mechanism to
launch gures into the air.
To close: Remove lava skiffs and dueling platform.
Slide dueling disk forward. Replace ”lava” in
container. Remove extruder and replace turret. Fold
in panel. Close playset.
Attach
landing
platform.
OPEN PLAYSET
Attach lava skiffs.
TURRET
LEVER
PRESS DOWN
TO LAUNCH
PANEL
RADAR
DISH
PLUNGER
“LAVA”
EXTRUDER
DUELING
DISK
NOTE: Remove turret when
using “lava” extruder.
PANEL
  • Page 1 1

Hasbro 85251 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI