Clarity EXL30 User manual

are trademarks or registered trademarks of Plantronics, Inc. Printed in China. 11/03

36846-01 Rev A

Importer:

Plantronics B.V.

Southpoint Building C

Scorpius 140

2132 LR Hoofddorp

The Netherlands

www.clarityproducts.com

User Guide

Bedienungsanleitung

Manual del usuario

Guide de l’utilisateur

Manuale d’istruzioni

Gebruiksaanwijzing

EXL30 AMPLIFIED

TELEPHONE

Line Powered

United Kingdom

0800 410014

Germany

0800 9323400

France

0825 0825 99

(0,15 € TTC/mn)

Switzerland

0800 932340

Spain

902 415191

Netherlands

0800 7526876

Luxembourg and Belgium

00800 75268766

Austria

0800 242500

Sweden

0200 214681

Portugal

+34 91 640 47 44

Denmark

80884610

Finland

0800 117095

Ireland

1 800 551896

Norway

800 11336

Italy

800 950934

MANUAL

AUTO

MANUAL

AUTO

FIG.A FIG.B

FIG.D

FIG.C

DIAGRAMSHELP LINE TELEPHONE NUMBERS

1 2

Page is loading ...

WELCOME

UK D E F I NL

EXL30 Amplified

Telephone from Clarity

www.clarityproducts.com

Thank you for selecting the EXL30

Amplified Telephone from Clarity.

This User Guide provides you with the

information you need to use your EXL30

effectively and safely.

Read this user guide thoroughly before

using your telephone.Keep the manual

near the telephone for easy reference.

The EXL30 Amplified Telephone is

Hearing Aid compatible.

6

UK

DIAGRAM KEY

1 Dial Mode Switch (Pulse/Tone)

2 Audio Output Socket

3 Telephone Line Connection

4 Ring Tone Switch

5 Ringer Volume Switch

6 Telephone Number Directory

7 Memory Buttons

8 Redial Button

9 Flash/Recall Button

10 Volume Control

11 Low Battery Indicator

12 Visual Ring Indicator

13 Amplify Button

14 Amplify Indicator

15 Programme Button

16 Call On Hold Indicator

17 Tone Control

18 Call Hold Button

IMPORTANT SAFETY INFORMATION

PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE USE:

When using your telephone equipment these basic safety precautions should always be followed

to reduce the risk of fire,electric shock,and injury to persons including the following:

Read and understand all instructions.

Follow all warnings and instructions marked on the telephone.

Please ensure this product is disconnected from the telephone line cable before installing or

replacing batteries.

Do not dispose of batteries in a fire.They may explode.Take empty batteries to a collection

point for chemical waste.

Do not install or use this telephone near water.

Avoid using a telephone (other than a cordless type) during a storm.There may be a remote risk

of electrical shock from lightning.

Unplug this telephone from the wall outlets before cleaning.Do not use liquid cleaners or

aerosol cleaners on the telephone.Use a damp cloth for cleaning.

Do not cover the slots and openings on this telephone.This telephone should never be placed

near or over a radiator or heat register.This telephone should not be placed in a built-in

installation unless proper ventilation is provided.

Do not place anything on the telephone line cable.Install the telephone where no one will step

or trip on the cable.

Never push any objects through the slots in the telephone.They can touch dangerous voltage

points or short out parts that could result in a risk of fire or electrical shock.Never spill liquid of

any kind on the telephone.

To reduce the risk of electrical shock,do not take this phone apart.Opening or removing covers

may expose you to dangerous voltages or other risks.Incorrect reassembly can cause electric

shock when the appliance is subsequently used.

Never install telephone wiring during a lightning storm.

Hereby, Plantronics BV declares that the Clarity™ EXL30 Amplified Telephone is in

compliance with the essential requirements and all other relevant provisions of

Directives 1999/5/EC and 93/42/EEC.

To view the Declaration of Conformity for this product please see

www.plantronics.com/documentation

Class I medical device

When the Amplified Indicator (14) is illuminated,the volume may be very loud and

in excess of 118dB.This mode is intended specifically for hearing impaired users.

GETTING STARTED

INSTALL BATTERIES

Please ensure this product is disconnected from the telephone line cable before

installing or replacing batteries.

To add extra brightness to the EXL30’s Visual Ring Indicator (12),install one 9 Volt alkaline

battery (not included).

TO INSTALL THE BATTERY

Fig.A

Use a pen to open the battery door (see instructions underneath the telephone unit)

Slide open the battery compartment cover on the bottom of the telephone,install the

battery,and replace the cover.

SETTING THE DIALLING MODE

Set the Dial Mode Switch (1) to T (tone) if you have touch tone DTMF service.Otherwise set

the switch to P (pulse).

CONNECTING FOR WALL MOUNT OR DESKTOP USE

WALL MOUNTING

Drill two holes in the wall 10.2cm (4") apart adjacent to the mounting holes on the telephone.

Use the correct screws to hang the telephone on the wall.

Fig.B Slide the handset hook out as shown in Fig.B and reverse its position so that the hook

points up and will hold the handset when you hang up.

Fig.C Insert the tabs of the phone base into the slots in the lower position of the base as

shown in Fig.C.Push the mounting bracket in and down firmly until it snaps into place.

Position on the wall close to your telephone wall socket.

Fig.D Connect the Telephone Line Cable and the Handset Cable to the telephone.

If required,use the supplied adapter.

Lift the handset and listen for a dial tone.

87

UK D E F I NL

UK

The telephone is ready to use.

DESKTOP

Fig.D

Connect the Telephone Line Cable and the Handset Cable to the telephone.

If required,use the supplied adapter.

Lift the handset and listen for a dial tone.The telephone is ready to use.

USING YOUR EXL30

INCOMINGVOICE AMPLIFICATION

Fig.E

Lift the handset and press the Amplify Button (13) to turn on the amplifier.

Fig.F You can adjust the volume of incoming calls by sliding the Volume Control (10).

The amplifier will turn off when you hang up.

CAUTION: Operation of the Amplification feature will make the receiver very loud.It is

designed specifically for hearing impaired users.

Amplification can be activated by pressing the Amplify Button (13) the Amplify Indicator (14)

indicates that Amplification is in operation.

By activating the Amplification feature you are choosing to increase the level of amplification that

allows any abnormal event to exceed 118dB.This is potentially harmful.The volume control

should be increased gradually to find the minimum level of amplification that is comfortable for

you. Avoid prolonged or unnecessary exposure to high volume levels

INCOMINGVOICETONE

The EXL30 provides extra amplification at the sound frequency you need to boost.To identify

the sound frequency range that best suits your needs,follow these steps:

Lift handset and listen for a dial tone.

Press the Amplify Button (13) to turn on the amplifier (refer to Fig.I on page 5).

Fig.G Slide the Tone Control (17) either right or left for maximum clarity.

The next time and every time you press the the Amplify Button (13),your EXL30 will

give you the best listening clarity.

RINGER VOLUME AND TONE

You can adjust the Ringer Volume Switch (5) as high as 85+ decibels.The settings available are

OFF,LO and HI,as shown in the main diagram on page 3.The Ring Tone Switch (4) has two pitch

settings:LO and HI,as shown in the main diagram on page 3.

HOLD

Fig.H

To put the call on hold,press the Call Hold Button (18) and return the handset to its

cradle.You will notice the Call Hold Indicator (16) illuminates.

NOTE: If you pick up an extension phone on the same line when the EXL30 is on HOLD,

the EXL30 will release the HOLD and you can continue your conversation on the extension

telephone.

LAST NUMBER REDIAL

Fig.I

To redial the last number called,lift the handset and press the Redial Button (8).The

telephone will redial up to 31 digits.

FLASH/RECALL

Fig.J

Press the Flash/Recall Button (9) to access special services available from your local

telephone company e.g.Call Waiting and 3-Way Calling.

(Subject to your local telephone service).

PROGRAMMINGTHE MEMORY BUTTONS

Fig.K

You can automatically dial twelve programmed telephone numbers using the Memory

Buttons (7).Each button can be programmed (or reprogrammed using the same

procedure) for a telephone number up to 15 digits long.

Fig.L To program a button,follow these steps:

Lift the handset and press the Programme Button (15).

Fig.M Enter the phone number on the keypad just as you would dial it normally.

Press Redial Button (8) if you want to insert a brief pause between two numbers.

Press a Memory Button (7) to store this number on that button.

Immediately hang up the handset.

NOTE: Any number previously stored at that button will be overwritten.

To change a stored number,repeat the programming process starting with Fig.K.

NOTE: Do not programme emergency service numbers into any memory button.

DIRECT AUDIO OUTPUT

Fig.N The Audio Output Socket (2) allows you to connect the EXL30 to a hearing aid,neck

loop,cochlear implant or other assistive listening devices.

To use this port,plug in a compatible auxiliary cable and connect it to your assistive

listening device.

Speak into the handset when you use the Audio Output connection.

NOTE:This port is a TNV connection with respect to EN41003.Only connect equipment that

complies with EN60950 to this port.

109

UK D E F I NL

UK

CONNECTING A SPEECH PROCESSOR

COCHLEAR IMPLANT ADAPTER CORD

Caution:

Before plugging any cord into your speech processor,you must consult your implant

manufacturer.

• Plug the mono end of the plug into the speech processor.

• Plug the stereo end of the plug into the Audio Output

socket on the telephone.

• Speak into the handset when using the Cochlear Implant

Adapter Cord.

OUTGOINGVOICE AMPLIFICATION

The EXL30 can amplify your outgoing voice by up to 15dB.To use this feature,set the Outgoing

Voice Amplifier switch to AMPLIFY located underneath the telephone unit.

NOTE:The factory pre-setting is NORMAL.

TROUBLE SHOOTING

PROBLEM

No dial tone.

Check all the telephone cable connections.

PROBLEM

Call cannot be dialled,or dials very slowly.

Reset the Dial Mode Switch (see Setting the Dial Mode).

PROBLEM

Visual Ring Indicator is not very bright.

Check and replace the 9 Volt battery.

PROBLEM

No number is dialled when the memory button is pressed.

No number stored in that Memory Button (see Programming the Memory Buttons.

PROBLEM

Call comes in but the telephone does not ring.

Check that the Telephone Line Cable is correctly connected.

WARRANTY

• The following 2 year warranty and service information applies only to product purchased and

used in the countries listed on page 1.You may also contact your local retail dealer for warranty

information in your country.

• Clarity guarantees the satisfactory condition of the equipment with regard to manufacturing

and material defects for 2 years from the date of purchase.(Please keep your original

receipt safely).

• This product must be installed and used in accordance with the instructions contained in this

User Guide,and serviced at an approved Plantronics Service Centre.Failure to comply with

these conditions may render the warranty invalid.

2YEAR WARRANTY AND REPAIR SERVICE

• Products under warranty are replaced free of charge.

• All units serviced to full production standards using original factory parts.

CUSTOMER SERVICE

If you need support in installing or using your EXL30 telephone,then please contact the Clarity

Customer Service (see page 1).

1211

UK D E F I NL

1

A

B

C

G

H

I

Q

R

S

T

U

V

X

Y

Z

J

K

L

M

N

O

D

E

F

23

4

5

6

78

9

0

#

*

HOLD PROG

TONE

LO

HI

FLASH

REDIAL

VOL

AMPLIFY

M1

M2

M5

M6

M7

M8

M9

M10

M11

M3

M4

®

P

W

Page is loading ...

Clarity EXL30 User manual

Related papers

Other documents