Link electronic 1652 User manual
- Category
- Video line amplifiers
- Type
- User manual
Link electronic 1652 is a digital audio distribution amplifier that can accept one digital audio input and provide eight digital audio outputs. The device is compatible with AES3 and AES3-ID standards, and it can be used to distribute digital audio signals over long distances.
The 1652 has a number of features that make it ideal for professional audio applications. These features include:
- Re-clocked and EQ: The 1652's digital signal path uses state-of-the-art integrated circuits to re-slice and re-clock the data, which helps to attenuate jitter. The device also has an EQ that can be used to compensate for cable loss.
Link electronic 1652 is a digital audio distribution amplifier that can accept one digital audio input and provide eight digital audio outputs. The device is compatible with AES3 and AES3-ID standards, and it can be used to distribute digital audio signals over long distances.
The 1652 has a number of features that make it ideal for professional audio applications. These features include:
- Re-clocked and EQ: The 1652's digital signal path uses state-of-the-art integrated circuits to re-slice and re-clock the data, which helps to attenuate jitter. The device also has an EQ that can be used to compensate for cable loss.
1000 SERIES DIGIFLEX
Mounting Frame Options
1000 - Single Power Supply, Holds 11 Modules
1000/2 - Dual Power Supply, Holds 10 Modules
7200 - Mounting Frame, Holds 1 Module
LINK ELECTRONICS, INC.
DIGITAL AUDIO DISTRIBUTION AMPLIFIER 1 X8
DigiFlex 1652
FEATURES
Digital Input
Eight Stereo Digital Outputs
Terminal or BNC Outputs
AES/EBU Standard
11 Modules per Frame
EQ and Re-clocked
High performance Digital Audio distribution is easy
with the LINK 1652 Digital Audio Distribution
Amplifier. The 1652 accepts one input and
provides eight outputs of digital audio to AES3-
1992 specifications. Up to eleven 1652s may be
mounted in a 2RU space with LINK's DigiFlex
frame. Transformer coupled inputs and outputs are
standard to eliminate the possibility of ground
loops. The frame's unique modular rear cell design
allows the user to select terminal block (Model
1016 for twisted-pair cable) or BNC (Model 1017
for coaxial cable) connectors. The BNC rear cell
interface is designed to AES3-ID specifications.
The digital signal path uses state-of-the-art
integrated circuits. The data is re-sliced and re-
clocked for jitter attenuation. Sample rate is
automatically detected and indicated by front panel
LEDs. Data errors are also detected and reported
by red LEDs on both the front and rear panels. A
"Frame Fault" output can also be enabled for
centralized error reporting.
Designed with the professional in mind, the
DigiFlex 1652 will provide years of error free
performance. Backed by LINK's standard 10-year
warranty, the 1652 combines high-performance
and economy.
LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255
MADE IN THE USA
1016 REARCELL
1652/100202
1017 REARCELL
DIGIFLEX 1652 DIGITAL AUDIO DA
SPECIFICATIONS
INPUTS:
Number:................................................................ One
Interface: .............................................. AES3-1992 (Twisted pair)
............................................................ AES3-ID (BNC)
Format:................................................ BI-Phased Mark Encoded
Impedance: ...................................................... 110Ω or 75Ω
Coupling: .........................................................Transformer
Sampling Frequency Range: ...................................... 30KHz to 50KHz
Sampling LED's:.........................................32KHz, 44.1KHz & 48KHz
Data Error Detection: ...................................................... LED
Level: ........................................................ 200mV Minimum
OUTPUTS:
Number: ............................................................... Eight
Interface: ................................................AES3-1992 or AES3-ID
Format:................................................. BI-Phase Mark Encoded
Coupling: .........................................................Transformer
Impedance: ...................................................... 110Ω or 75Ω
Level: ..........................................................4.2Vpp Typical
Connectors: ..............................................Screw Terminal or BNC
BNC Connector Cell: ....................................................1017
Screw Terminal Cell: ....................................................1016
LED INDICATORS: (Front edge of module)
Power LED: ............................................ Green to Show Power On
Signal Error: ............................................... Red to Show No Input
32KHz LED: ..............................Green to Show 32KHz Sampling Freq. ±4%
44.1KHz LED: ............................Green to Show 44.1Hz Sampling Freq. ±4%
48KHz LED: ............................... Green to Show 48Hz Sampling Freq. ±4%
ENVIRONMENTAL:
Temperature: ................................................ 0° to 50°C Ambient
Humidity: ............................................10% to 90% non-condensing
Power: .................................................................2.5W
MECHANICAL:
Height: .............................................................. 3.2 Inch
Width:............................................................... 1.0 Inch
Length: ............................................................... 10 Inch
Weight:.............................................................. 7.25 Oz
LINK ELECTRONICS, INC.
2137 Rust Avenue
Cape Girardeau, MO 63703
Phone: 573 334 4433
FAX: 573 334 9255
PROFESSIONAL SERIES--
modular system products--by
LINK
-
1
-
2
Link electronic 1652 User manual
- Category
- Video line amplifiers
- Type
- User manual
Link electronic 1652 is a digital audio distribution amplifier that can accept one digital audio input and provide eight digital audio outputs. The device is compatible with AES3 and AES3-ID standards, and it can be used to distribute digital audio signals over long distances.
The 1652 has a number of features that make it ideal for professional audio applications. These features include:
- Re-clocked and EQ: The 1652's digital signal path uses state-of-the-art integrated circuits to re-slice and re-clock the data, which helps to attenuate jitter. The device also has an EQ that can be used to compensate for cable loss.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Link electronic LEI-540 User manual
-
Link electronic LEI-547 User manual
-
Link electronic 1660 User manual
-
Link electronic DigiFlex 1160 User manual
-
Link electronic DigiFlex 1165 User manual
-
Link electronic DigiFlex 1143 User manual
-
Link Electronics DigiFlex 1650 User manual
-
Link electronic DigiFlex 1650 User manual
-
Link electronic DigiFlex 1152 User manual
-
Link electronic 1175 User manual
