D-Link DAP-1360 User manual

Category
Routers
Type
User manual

This manual is also suitable for

2D-Link DAP-1360 User Manual
Table of Contents
Product Overview ........................................................ 4
Package Contents ................................................... 4
System Requirements ............................................. 4
Introduction ..............................................................5
Features .................................................................. 6
Hardware Overview ................................................. 7
Connections ....................................................... 7
LEDs ..................................................................8
Wireless Installation Considerations....................... 10
Seven Conguration Operation Modes ................... 11
Access Point Mode ................................................11
Wireless Client Mode ............................................. 12
Repeater Mode ......................................................13
Bridge Mode .......................................................... 14
Bridge with AP Mode ............................................. 15
WISP Client Router mode .....................................16
WISP Repeater mode ............................................ 17
Conguration ............................................................. 18
Web-based Conguration Utility ............................ 18
Setup Wizard .........................................................19
Setup Wizard for AP Mode .................................... 20
Setup Wizard for Repeater Mode .......................... 27
Setup Wizard for Wireless Client Mode .................35
Add Wireless Device With WPS ............................ 43
Wireless Setup .....................................................45
Access Point ....................................................45
Repeater ..........................................................47
Wireless Client ................................................. 48
Bridge ............................................................. 49
Bridge with AP .................................................50
WISP Client Router and WISP Repeater .........51
WAN Settings ........................................................ 52
Dynamic IP (DHCP) ......................................... 52
Static IP ........................................................... 53
PPPoE .............................................................54
PPTP ............................................................... 55
LAN Setup ....................................................... 56
LAN Settings .................................................... 57
Advanced ...............................................................58
Advanced Wireless ..........................................58
Access Control .................................................59
User Limit .........................................................60
Port Forwarding ...............................................61
Port Filter .........................................................62
DMZ .................................................................63
Parental Control ............................................... 64
Advanced Network ...........................................65
Maintenance ..........................................................66
Device Administration .....................................66
Save and Restore ...........................................66
Table of Contents
3D-Link DAP-1360 User Manual
Table of Contents
Firmware ......................................................... 67
Watchdog (Ping of Life) ...................................68
Time ................................................................. 69
Schedules ........................................................70
Status .................................................................... 71
Device Info ....................................................... 71
Log ................................................................... 72
Statistics .......................................................... 73
Wireless ...........................................................73
Help ............................................................................. 74
Wireless Security.......................................................75
What is WEP? ......................................................75
Congure WEP ......................................................76
What is WPA? .......................................................77
Congure WPA-PSK, WPA2-PSK, and WPA2-Auto-
PSK (Personal) .....................................................78
Congure WPA-EAP, WPA2-EAP, and WPA2-Auto-
EAP (Enterprise) .................................................... 79
Connect to a Wireless Network ...........................................80
Using Windows® XP .............................................80
Using Windows® Vista (Secured Network) ...........82
Using Windows® Vista (Unsecured Network) ......85
Troubleshooting ..............................................................88
Wireless Basics ........................................................ 90
Wireless Modes ......................................................... 94
Networking Basics .................................................... 95
Technical Specications........................................... 97
4D-Link DAP-1360 User Manual
Section 1 - Product Overview
• D-Link DAP-1360 Wireless N Access Point
• Power Supply
• Manual on CD
• Quick Installation Guide
• Ethernet Cable
System Requirements
To congure this device, you will need the following:
A computer equipped with an Ethernet interface and operating under Windows Vista, XP or 2000,
Mac OS 10.X or above, or Linux
Internet Explorer or Netscape Navigator version 6.0 or above, with JavaScript enabled
Product Overview
Package Contents
WARNING: Using a power supply with a different voltage rating
than the one included with the DAP-1360 will cause
damage and void the warranty for this product.
Your DAP-1360 package should contain the following items. If any of the items are missing, please contact
your reseller.
5D-Link DAP-1360 User Manual
Section 1 - Product Overview
Introduction
D-Link, an industry leader in networking, introduces the new D-Link Wireless N Access Point(DAP-1360). With the
ability to transfer les with a maximum wireless signal rate of up to 300Mbps
1
, the DAP-1360 gives you high-speed
wireless network access for your home or ofce.
The DAP-1360 is Wi-Fi IEEE 802.11n compliant, meaning that it can connect and interoperate with other 802.11n
compatible wireless client devices. The DAP-1360 is also backwards compatible with 802.11b/g. It can be exibly
congured to operate in 7 different modes Access Point, Wireless Client, Bridge, Bridge with AP, Repeater, WISP
Client Router or WISP Repeater.With its Setup Wizard, the DAP-1360 Access Point ensures that you will be up and
running on a wireless network in just a matter of minutes.
The DAP-1360 Access Point features Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) and 64/128-bit WEP Encryption
to provide an enhanced level of security for wireless data communications. The DAP-1360 also includes additional
security features to keep your wireless connection safe from unauthorized access.
The DAP-1360 supports WPS on the AP, repeater and wireless client operation modes,with each capable of being
conveniently set up by using the PIN method or Push Button.
1 Actual data throughput will vary. Network conditions and environmental factors, including volume of network trafc, building materials and construction,
and network overhead, lower actual data throughput rate.
6D-Link DAP-1360 User Manual
Section 1 - Product Overview
Connects homes and small ofces to a high-speed wireless network - This AP provides better wireless signals
for your computers than earlier generation wireless 802.11g technology. Adding this wireless AP to your home and
ofce provides an excellent solution for doing everyday activities such as transferring les, browsing the Internet, and
downloading music. This AP uses Intelligent Antenna technology to transmit multiple streams of data, which enable
you to receive wireless signals in the farthest corners of your home or ofce. Not only does it extend your wireless
range, it also works with your existing 802.11g devices.
Multiple operation modes The AP can be exibly congured to operate as an Access Point, Wireless Client,
Bridge, Bridge with AP, Repeater, WISP Client Router or WISP Repeater.
Total security Complete set of security features including WEP encryption and WPA/WPA2 to protect network
against outside intruders.
WPS (Wi-Fi Protected Setup) - This AP supports WPS in the AP, Repeater and Wireless Client operation
modes.
Protect wireless network and data The DAP-1360 provides 64/128-bit WEP encryption and WPA/WPA2 security
to protect your network and wireless data. In addition, it also provides MAC address ltering and the Disable SSID
Broadcast function to limit outsiders’ access to your home and ofce network.
Easy to install and use With D-Link's Setup Wizard, you can set up your wireless network in minutes. It congures
your DAP-1360's operation mode, makes it easy to add new wireless devices onto the network, and helps you create
a simple wireless network for your home and ofce.
* Maximum wireless signal rate based on IEEE Standard 802.11n specications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network trafc, building materials and construction, and network overhead lower actual data throughput rate.
Features
7D-Link DAP-1360 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
RESET:
Restores the access points
conguration to its original
factory default settings.
LAN Port:
Connects to an Ethernet-enabled
device such as a computer,
switch or router.
Power Socket:
Connects to the power
adapter.
8D-Link DAP-1360 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
Power: A solid green
con d i tion ind i c ates
the device has been
successfully connected
to a power source.
WLAN: A blinking green condition
indicates wireless activity is
taking place; a solid green
condition indicates wireless
connections are OK.
LAN: A bli n king gr e e n
condition indicates data is
being transferred through
the LAN port; a solid green
condition indicates the LAN
port connection is OK.
Security: A solid green
c o n d i t i o n i n d i c a t e s
wireless security has been
enabled.
9D-Link DAP-1360 User Manual
Section 1 - Product Overview
LEDs
WPS LED: A solid light
indicates a successful
WPS connection. A
blinking light indicates
the device is trying to
establish a connection.
10D-Link DAP-1360 User Manual
Section 2 - Wireless Installation
The D-Link wireless access point lets you access your network using a wireless connection from virtually anywhere
within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location
of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary
depending on the types of materials and background RF (radio frequency) noise in your home or business. The key
to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link access point and other network devices to a
minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your
devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree
angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters)
thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle)
for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect
on range. Try to position access points, wireless access points, and computers so that the signal passes
through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation,
water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate
RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home
security systems), your wireless connection may degrade dramatically or drop completely. Make sure your
2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal
even if the phone in not in use.
Wireless Installation Considerations
11D-Link DAP-1360 User Manual
Section 2 - Wireless Installation
How your AP will operate depends on which operation mode you select. This section will help you gure out which
setting works for different requirements.
Seven Configuration Operation Modes
Access Point Mode
In the Access Point mode, the DAP-1360 acts as a central connection point for any computer (client) that has a 802.11n
or backward-compatible 802.11b/g wireless network interface and is within range of the AP. Clients must use the same
SSID (wireless network name) and channel as the AP in order to connect. If wireless security is enabled on the AP,
the client will need to enter a password to connect to the AP. In the Access Point mode, multiple clients can connect
to the AP at the same time.
Wireless PCs Using the DAP-1360 as a Central Connection Point
12D-Link DAP-1360 User Manual
Section 2 - Wireless Installation
Wireless Client Mode
In the Wireless Client mode, the DAP-1360 acts as a wireless network adapter for your Ethernet-enabled device (such
as a game console or a TV set-top box). Connect your Ethernet-enabled device to the AP using an Ethernet cable. The
AP Client mode can support multiple wired clients. If you are going to connect several Ethernet-enabled devices to your
DAP-1360, connect the LAN port of the DAP-1360 to an Ethernet switch, then connect your devices to this switch.
Ethernet-enabled Gaming Console Using the DAP-1360 as a Wireless Interface to Access the Internet
13D-Link DAP-1360 User Manual
Section 2 - Wireless Installation
Repeater Mode
In the Repeater mode, the DAP-1360 increases the range of your wireless network by extending the wireless coverage
of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure
that all clients, APs, and the wireless router all use the same SSID (wireless network name) and channel.
Extending the Wireless Coverage of a Wireless Router Using the DAP-1360
14D-Link DAP-1360 User Manual
Section 2 - Wireless Installation
Bridge Mode
In the Bridge mode, the DAP-1360 wirelessly connects seperate LANs that can’t easily be connected together with a
cable. For example, if there are two wired LANs separated by a small courtyard, it would be expensive to bury cables
to connect between the two sides together. A better solution is to use two DAP-1360 units to wirelessly connect the
two LANs. In the Bridge mode, both DAP-1360 units do not act as APs.
Note: The Bridge mode is not specied in the Wi-Fi or IEEE standards. This mode will only work using two DAP-1360
units. Communication with other APs (even other D-Link APs) is not guaranteed.
Connecting Two Separate LANs Together Through Two DAP-1360 Units
(Wireless PCs Cannot Access the DAP-1360 Units)
LAN 1
LAN 2
15D-Link DAP-1360 User Manual
Section 2 - Wireless Installation
Bridge with AP Mode
The Bridge with AP mode is the same as the Bridge mode, but in this case, the DAP-1360 also acts as an AP. Clients
with wireless interfaces can wirelessly connect to the DAP-1360 and then connect to the other LAN that the DAP-1360
bridges to.
Note: The Bridge with AP mode is not specied in the Wi-Fi or IEEE standards. This mode will only work using two
DAP-1360 units. Communication with other APs (even other D-Link APs) is not guaranteed.
Connecting Two Separate LANs Together Through Two DAP-1360 Units
(Wireless PCs Can Access the DAP-1360 Units)
LAN 1
LAN 2
16D-Link DAP-1360 User Manual
Section 2 - Wireless Installation
WISP Client Router Mode
In the WISP Client Router mode, the DAP-1360 wirelessly connects to a WISP (Wireless Internet Service Provider) AP.
In this mode, the DAP-1360 also acts as a router for wired clients on your LAN and provides NAT (Network Address
Translation) and a DHCP server to generate IP addresses for wired clients only. NAT and the DHCP server allow many
computers to share the same wireless Internet connection.
If you are a WISP subscriber and want to access your WISP account using wired computers, connect your computers
to the DAP-1360 to get NAT, and then connect them to the WISP AP.
Connecting Wired PCs to the Internet Using the DAP-1360
17D-Link DAP-1360 User Manual
Section 2 - Wireless Installation
WISP Repeater Mode
In the WISP Repeater mode, the DAP-1360 wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In
this mode, the DAP-1360 also acts as a router for both wireless and wired clients on your LAN. The WISP Repeater
mode provides NAT (Network Address Translation) and a DHCP server to generate IP addresses for both wireless
and wired clients. NAT and the DHCP server allow many computers to share the same wireless Internet connection.
If you are a WISP subscriber and want to use your WISP account in your house, but the signals from the outdoor WISP
AP are not strong enough to reach all of the areas in the house, use the DAP-1360 to can extend the signals from the
outdoor WISP AP and provide access to wireless clients in your house. Using this mode, wireless as well as wired
clients can connect to the outdoor WISP AP through the DAP-1360.
Connecting Wired and Wireless PCs to the Internet Using the DAP-1360
18D-Link DAP-1360 User Manual
Section 3 - Conguration
Configuration
Web-based Configuration Utility
1. Open the web browser
2. Type in the device
name (dlinkap) or ip
address (192.168.0.50)
of the DAP-1360.
If you wish to change the default settings or optimize the performance of the DAP-1360, you may use the configuration
utility that D-Link has included a configuration utility for this purpose.
After you have completed the initial installation, you can access the configuration menu, at any time, by opening the
web-browser and typing in the device name of the DAP-1360. The DAP-1360’s default device name is shown below:
Note: If you have changed the default device name assigned to the DAP-1360, make sure to enter the correct device name.
3. Type admin in the User Name
eld
4. Leave the Password blank
5. Click OK
19D-Link DAP-1360 User Manual
Section 3 - Conguration
Click Launch Wireless Setup Wizard to quickly
congure your access point.
To setup your wireless network using WPS, you can
click Add Wireless Device With WPS and skip to page
43.
Setup Wizard
20D-Link DAP-1360 User Manual
Section 3 - Conguration
This Wizard is designed to assist you in connecting you wireless device to your access point. It will guide you through
step-by-step instructions on how to get your wireless device connected.
Setup Wizard for AP Mode
Click Launch Wireless Setup Wizard to begin.
Click Launch Wireless Setup Wizard
Select the wireless mode Access Point.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99

D-Link DAP-1360 User manual

Category
Routers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI