Santec VDC-727IR-WM User manual

Version 1.3sfi/1014/dt-engl/A5

BEDIENUNGSANLEITUNG / USER MANUAL

Deutsch / English

Tag/Nacht IR-Speed-Dome mit Wandarm

Day/night IR speed dome with wall bracket

Modelle / Models:

VDC-727IR-WM

VDC-727IR-WBJB

Page is loading ...

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 3 -

Dear customer,

Thank you for purchasing a high quality SANTEC device.

We recommend that you read this manual thoroughly before operating your new system for

the first time. Please follow all instructions and observe the warnings contained in this

manual.

Please contact your local dealer or us if you have any questions or if you wish to claim for a

service or warranty.

You will find further information on our website:

www.santec-video.com

in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), without

the written prior permission of SANTEC BW AG.

No reproduction of any part or excerpts thereof are permitted.

Errors excepted. Specifications are subject to change without notice for quality improvement.

SANTEC is a registered trademark of SANTEC BW AG. All other companies or products mentioned in

this publication are trademarks, registered trademarks or brands of the respective company.

Page is loading ...

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 6 -

ENGLISH

Table of contents

Safety precautions 53

Safety instructions 54

About this user manual 55

1. General 56

1.1 Items included in the delivery 56

1.2 Integrated IR-LEDs 56

2. Speed dome installation 57

2.1 Wall mount 57

2.2 Connections 59

2.3 DIP-switches / dome connection interface 60

2.4 Special installation for VDC-727IR-WBJB 62

3. Speed dome settings via OSD menu 66

3.1 Language 67

3.2 Dome information 67

3.3 Display options 69

3.3.1 Camera name 69

3.3.2 Coordinates 70

3.3.3 Start-up screen message 70

3.3.4 Crosshairs 70

3.4 Control settins 70

3.4.1 Dome address setup 71

3.4.2 Auto flip 71

3.4.3 Proportional speed 71

3.4.4 Pan reverse 71

3.4.5 Tilt reverse 72

3.4.6 Vectorscan still 72

3.4.7 Auto focus 72

3.4.8 Auto AE 72

3.4.9 Vectorscan AF 72

3.4.10 Tilt limit 72

3.4.11 Speed Limit 73

3.5 Camera options 73

3.6 Function programming 73

3.6.1 Preset 73

3.6.2 Vectorscan 75

3.6.3 Pattern 76

3.6.4 Sector setup 78

3.6.5 Mask zones 78

3.6.6 Mask colour 78

3.6.7 Motion detection 78

3.6.7.1 Park action 79

3.6.7.2 Power on action 79

3.6.7.3 Limit operation 79

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 7 -

3.7 System setup 80

3.7.1 Clear memory 80

3.7.2 Restore default setting 80

3.7.3 Coloursystem 80

3.7.4 Dome restart 80

3.7.5 IR module setup 81

4. Camera module setup via OSD menu 81

4.1 SSDR 82

4.2 White balance 83

4.3 Backlight 84

4.4 Motion detection 85

4.4.1 Area selection 85

4.4.2 Area mode 85

4.4.3 Sensitivity 86

4.4.4 Smart zoom 86

4.5 Focus 87

4.5.1 Mode 87

4.5.2 Zoom track 87

4.5.3 Zoom speed 88

4.5.4 D-zoom pos init 88

4.5.5 Zoom 88

4.5.6 User preset 88

4.5.7 Lens init 88

4.6 Exposure 89

4.6.1 Brightness 89

4.6.2 Iris 89

4.6.3 Shutter 89

4.6.4 AGC 90

4.6.5 SSNR3 90

4.6.6 Sens-up 91

4.7 Special 91

4.7.1 Day/night 91

4.7.2 DIS (Digital Image Stabilisation) 92

4.7.3 Synchronisation 92

4.7.4 Image adjustment 92

4.7.5 Monitor 92

4.7.6 Display 93

4.7.7 Return 93

4.8 Return 93

4.9 Exit 93

5. Connecting an alarm box to the speed dome 94

6. Special features 95

7. Technical specifications 96

Page is loading ...

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 53 -

Safety precautions

Caution

Description of symbols

Danger: This symbol is intended to alert the user to the presence of un-insulated

"dangerous voltage" within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to a person.

Warning: This symbol is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying

the appliance.

CE compliance

Attention: Any changes or modifications to this appliance which have not been explicitly

approved of by the respective regulatory authority, may lead to a prohibition of usage of this

appliance.

This appliance complies with the CE guidelines.

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 54 -

Safety instructions

Before operating the appliance, please read this manual carefully and retain it for further

reference.

Before cleaning the appliance, it has to be switched off and unplugged from the power outlet.

Wipe the appliance with a soft damp cloth.

Do not use harsh cleansers or aerosols for cleaning. The type label may not be replaced.

Do not use attachments unless recommended by the manufacturer as they may affect the

functionality of the appliance and result in the risk of fire, electric shock or injury.

Never install the appliance in areas exposed to water or other liquids.

The appliance has to be installed in a safe and stable location which is able to carry the weight of

the appliance.. Quick stops, excessive force, and uneven surfaces may cause the appliance to fall

causing serious injury to persons and damage to objects.

Openings in the appliance, if any, are provided for ventilation to ensure reliable operation of the

appliance and to protect if from overheating. These openings must not be covered or blocked.

Please make sure that the appliance does not overheat.

The appliance should only be operated from the type of power source indicated on the marking

label. If you are not sure of the type of power supplied at the installation location, please contact

your local dealer.

An appliance which is powered through a polarized plug (a plug with one blade wider than the

other) will fit into the power outlet only one way. This is a safety feature. If you are unable to insert

the plug into the outlet, try reversing the plug. Do not defeat the safety purpose of the polarized

plug.

If the appliance is powered through a grounding-type plug, the plug will only fit into a grounding-

type power outlet. This is a safety feature. If your outlet does not have the grounding plug

receptacle, contact your local electrician.

Route power cords and cables in a manner to protect them from damage by being walked on or

pinched by items places upon or against them.

For protection of the appliance during a lightning storm or when it is left unattended and unused

for a longer period, unplug the appliance from the wall outlet. Disconnect any antennas or cable

systems that may be connected to the appliance. This will prevent damage to the appliance due to

lightning or power-line surges.

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric

shock.

Never insert items into the openings of the appliance. They may touch parts under electric current

which may cause an electric shock.

Never pour any liquids over the appliance.

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 55 -

In case of any operating interruption or a complete operating failure please switch off the

appliance and disconnect it from the wall outlet. Never attempt to service or repair the appliance

yourself, as opening or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

When replacement parts are required, be sure that the service technician uses replacements parts

specified by the manufacturer or that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

Upon completion of any service or repairs to the appliance, ask the service technician to perform

safety checks to verify that the appliance is in proper operating condition.

The appliance should only be installed by qualified service personnel and has to comply with local

specifications and regulations.

The camera is equipped with IR-LEDs. Please make sure to always keep a distance of

> 1m to avoid damages to your health. Never look directly into the IR-LEDs – this may

cause eye damages!

Never point the camera at an object with a high degree of luminance. Bright vertical or horizontal

lines can result in a distortion (outshine) of the entire image on the monitor. This artifact is not an

error but a particularity of semiconductor CCDs when they are directly exposed to a powerful light

source.

At the installation site, the camera has to be adjusted to the given light conditions.

Please respect the local legal regulations on waste if you need to dispose of discarded appliances.

This symbol means that electrical appliances need to be disposed of properly and not

simply with unsorted household refuse. Please respect local regulations on waste

disposal.

About this user manual

This manual aims at assisting the user on how to operate camera VDC-727IR-WM.

This manual is subject to rigid quality control. However, no guarantee can be given that

mistakes are not present. We reserve the right to make changes to the manual without prior

notice.

Before operating the appliance, please read this manual carefully and retain it for further

reference.

Verify that all appliance items are included in the delivery. Should items be missing, do not

operate the appliance and contact your local dealer.

Never attempt to repair the appliance yourself. This should only be done by qualified service

personnel.

Improper handling of the appliance will invalidate the warranty.

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 56 -

1. General

1.1 Items included in the delivery

1x Speed dome VDC-727IR-WM with cover

1x Wall bracket WM-HDH-306

1x Rubber gasket 50mm

1x Seal stopper M32

1x 9-pin connector plug with screw terminal and video connector adapter BNC

2x Allen wrench

1x Mini screw driver

1x Safety rope

3x Screws for dome head

1x User manual

1.2 Integrated IR-LEDs

The dome camera is equipped with IR LEDs. This enables video surveillance even under

poor light conditions or at night.

Depending on the light conditions, the built-in IR-LEDs automatically switch on or off.

The range of the IR LEDs strongly depend on the location and the surrounding.

Caution:

The camera is equipped with IR LEDS. Please ensure to always keep a distance

of > 1 m to avoid damages to your health. Never look directly into the IR LEDs to

prevent eye damages.

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 57 -

2. Speed dome installation

2.1 Wall mount

Preparation:

The dome including wall bracket weighs approx. 8 kg and is thus rather heavy.

Therefore it is recommended that 2 persons mount the dome to make the installation

process easier.

Please ensure that the selected wall is solid and strong enough to carry the weight of

the speed dome and the wall bracket.

The delivery contains 2 boxes: In the first box, you will find the speed dome, the

separate dome cover and the accessories. The second box contains the wall bracket.

Please see the description below to fix the speed dome to the wall bracket.

Start with the wall bracket.

Installation:

Take the wall bracket out of the box.

Use the provided Allen wrench to loosen the

upper of the two safety screws.

Remove the thread.

Put the thread back on the bracket.

Put your thumb inside the thread and use the other

fingers to hold tight the outside of the thread.

In this position, turn the complete thread clockwise to

tighten it.

Note: This step is necessary to seal the thread.

Now tighten the upper safety screw again (which you

had previously loosened).

Pull the provided 50 mm rubber gasket over the

thread.

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 58 -

Lead your connection cables through the wall

bracket. The cable end should hang out of the

bracket by approx. 10 cm.

Then mount the wall bracket to the wall (make

sure the wall is able to carry the weight!).

(Please also read the manual of wall bracket

WM-HDH-306).

If you don’t want to use the already connected

video connection adapter, you may also connect

a coax cable directly to connector blocks

VI and VG.

To do this, it is helpful to open the service lid on

the wall bracket to have better access to the

cables/BNC-plug.

If previously opened, close the service lid again

before you continue with the installation.

Opened

service lid

on wall

bracket

Use a pointed, round item (e.g. a pen or a Phillips

screwdriver; no knife!) to pierce a hole into the

membrane of the seal stopper. The hole should just

be large enough to allow the connection cables to go

through.

Put the seal stopper in the wall bracket.

The purpose of the seal stopper is to prevent

moisture or dust from getting onto the connection

interface of the dome.

Connect the cable with the plug (also see chapter

2.2 “Connectors“).

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 59 -

Take the speed dome out of the box.

It is recommended to set the dome parameters,

i.e. the DIP-switches, prior to the dome mounting

(also see chapter 2.3).

Hang the installation wire (which is fixed at one

end inside the dome cover) over the pin (also see

picture on page 58).

(It might be necessary to fix the wire on the pin to

prevent it from coming off again.)

Connect the cable plug to the dome.

Now put the speed dome onto the cover and turn

it tight (bayonet lock).

Take the dome cover out of the speed dome box.

Seize the cover to the wall bracket thread (also see

picture below).

Please make sure that the screw holes are freely

accessible and are not hidden by the bracket (this is

important for the later speed dome mounting).

Then use an Allen wrench to tighten the lower of the two

safety screws.

Freely accessible screw holes

Rubber gasket 50 mm

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 60 -

Tighten the 3 security screws.

The dome is now installed.

Finally, please clean the front

glass of the lens and the IR-LED

using a soft cloth to prevent

reflections.

Note:

Depending on the outdoor

environment, the cleaning should

be done regularly.

Wall bracket

Lens

IR-LED

IR-LED for short

distances

Day/night sensor

Put on the safety rope (arresting cable) by putting

one end of it underneath a safety screw on the

dome housing (similar to a washer).

Click the shackle of the other end to the bracket.

Please make sure that all elements are safely

fixed!

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 61 -

2.2 Connectors

Pin assignment of connector plug:

AC(+): Connector for 12 V DC (+) or 24 V AC

AC(-): Connector for 12 V DC (-) or 24 V AC

RX-: RS-485 communication line (RX-)

RX+: RS-485 communication line (RX+)

VG: Video ground (coax shielding)

VI: Video output (coax inner conductor) 75 Ohm

PE: not used

NC: not used

Attention:

Please ensure that as a last step, the dome is connected to power (and not earlier).

The dome undergoes an initialisation routine and has to freely pan and tilt.

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 62 -

2.3 DIP-switches / dome connection interface

On the dome top, you will find the following connectors and DIP-switches:

not used

Connector interface

(see „Chapter 2.2 Connectors“)

DIP-

switches

Description of

DIP-switch

setting options

Pin for

attaching the

installation

wire

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 63 -

DIP-switch setting options:

SW1 options (DIP-switch 1 settings):

Protocol / DIP-switch

2

3

4

5

Pelco-D

ON

OFF

Pelco-P

OFF

ON

OFF

SW2 address (ID) (DIP-switch 2 settings):

DIP-Switch

1

2

3

4

5

6

7

8

Funktion

A1

A2

A3

A4

A5

A6

A7

A8

ON

1

2

4

8

16

32

64

128

OFF

0

ID = A1 + A2 + A3 + A4 + A5 + A6 + A7 + A8

(see example settings below)

Example:

Pelco-D,

2400 Baud Rate *

2

3

4

5

6

7

ON

OFF

ID=1 *

ON

OFF

1

0

ID=88

OFF

ON

OFF

ON

OFF

0

8

16

0

64

0

* = Factory default setting; at delivery

Baud Rate

6

7

2400

OFF

4800

OFF

ON

9600

ON

OFF

19200

ON

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 64 -

2.4 Special installation of VDC-727IR-WBJB

Speed dome VDC-727IR-WBJB comes with a wall bracket and power supply (WBJB-HDH-

306).

Please also read the supplied instructions for power supply WBJB-HDH-306.

Please note the following when installing the speed dome:

When using the speed dome VDC-727IR in combination with power supply WBJB-HDH-306,

only the supplied connection cable for the dome is used. By this connection, the dome is

supplied with 24 V AC power and the RS-485 communication is established.

The alarm connections are not used. If the dome camera is to be controlled by alarm

contacts, this has to be done by using alarm box AB-81-485 (optionally available) which is

included externally in the RS-485 connection.

Connection to power supply WBJB-HDH-306:

Grounding

RS-485

6-pin plug

(from connection

cable to dome)

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 65 -

When delivered, the speed dome is already connected to power supply WBJB-HDH-306.

The following pictures illustrate how the plug of the connection cable it connected to the

interface.

6-pin plug: 9-pin plug:

How to insert the seal stopper into the wall bracket:

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 66 -

3. Speed dome setting via OSD menu

Note:

The OSD menu can only be accessed by an optionally available keyboard/control panel

including joystick (not included in the speed dome delivery).

The following pages in this manual describe the OSD settings using a SANTEC KSC-3505

keyboard.

The camera is set to factory default and is ready for immediate use.

If, however, you need to change these default settings, you can do it by using an optional

keyboard including joystick (e.g. SANTEC KSC-3505 keyboard; not included in the speed

dome delivery) to call-up the OSD menu.

Factory default settings: Pelco-D protocol, 2400 Baud, ID-001.

Please ensure that the keyboard is set to the same communication parameter as the dome

camera.

To call-up the OSD menu of the dome camera, please enter the command „PRESET 95“ on

the keyboard. Now you can move the joystick left/right/up/down to go to the desired menu

item.

If a confirmation is required in the OSD menu, please enter „PRESET 95“ on the keyboard or

press „IRIS OPEN“.

Exit the selected function or menu item by pressing „IRIS CLOSE“.

Keyboard SANTEC KSC-3505 (example)

„IRIS OPEN“ or „IRIS CLOSE“

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 67 -

Main menu:

On the keyboard, enter „PRESET 95“ to call-up the main menu of the OSD menu.

In the main menu, the following functions are available:

Use the joystick to select the desired menu item and confirm your choice by pressing „IRIS

OPEN“.

3.1 Language

Select your language.

Default language is GERMAN.

Available languages: German, English, French

MAIN-MENU

1 LANGUAGE ENGLISH

2 DOME INFORMATION

3 DISPLAY OPTIONS

4 CONTROL OPTIONS

5 CAMERA OPTIONS

6 FUNCTION PROGRAMMING

7 SYSTEM SETUP

Bedienungsanleitung / User manual

VDC-727IR-WM, VDC-727IR-WBJB

_________________________________________________________________________________

- 68 -

3.2 Dome information

Use the joystick to select the function „Dome information“ and confirm your choice by

entering „PRESET 95“ or by pressing „IRIS OPEN“.

The following menu appears:

In this menu, dome information are displayed mentioning the used communication settings

and version number.

Press „IRIS CLOSE“ on the keyboard to exit the menu.

MAIN-MENU

CAMERA

PROTOCOL PELCO_D

BAUDRATE 2400

DOME ID 001

VERSION 6.01.1

Iris close to exit.

Page is loading ...

Santec VDC-727IR-WM, VDC-727IR-WBJB User manual

Related papers

Other documents