Haier HE24D4MFA User manual

Brand: Haier

Model: HE24D4MFA

Category: LCD TVs

Type: User manual

Ð´»¿-» ÎÛßÜ ¬¸·- ³¿²«¿´ ½¿®»º«´´§ ¾»º±®»

±°»®¿¬·²¹ §±«® ÌÊô ¿²¼ ®»¬¿·² ·¬ º±® º«¬«®»

®»º»®»²½»ò

ÌÚÌóÔÝÜ ÌÊ

ÑÉÒÛÎ Í ÓßÒËßÔù

É¿®²·²¹

Î×ÍÕ ÛÔÛÝÌÎ×Ý ÍØÑÝÕ

ÜÑ ÒÑÌ

ÑÐÛÒ

ÝßËÌ×ÑÒ

ÝßËÌ×ÑÒæ ÌÑ ÎÛÜËÝÛ ÌØÛ Î×ÍÕ ÑÚ ÛÔÛÝÌÎ×Ý ÍØÑÝÕô

ÜÑ ÒÑÌ ÎÛÓÑÊÛ ÝÑÊÛÎ øÑÎ ÞßÝÕ÷ò

ÒÑ ËÍÛÎ ÍÛÎÊ×ÝÛßÞÔÛ ÐßÎÌÍ ×ÒÍ×ÜÛò

ÎÛÚÛÎ ÍÛÎÊ×Ý×ÒÙ ÌÑ ÏËßÔ×Ú×ÛÜ ÍÛÎÊ×ÝÛ

ÐÛÎÍÑÒÒÛÔò

Ì¸» ´·¹¸¬²·²¹ º´¿-¸ ©·¬¸ ¿®®±©¸»¿¼ -§³¾±´ô ©·¬¸·² ¿²

»¯«·´¿¬»®¿´ ¬®·¿²¹´» ·- ·²¬»²¼»¼ ¬± ¿´»®¬ ¬¸» «-»® ¬± ¬¸»

°®»-»²½» ±º «²·²-«´¿¬»¼ ¼¿²¹»®±«- ª±´¬¿¹» ©·¬¸·² ¬¸»

°®±¼«½¬Ž- »²½´±-«®» ¬¸¿¬ ³¿§ ¾» ±º -«ºº·½·»²¬ ³¿¹²·¬«¼»

¬± ½±²-

¬·¬«¬» ¿

®·-µ ±º »´»½¬®·½ -

¸±½µò

Ì¸» »¨½´¿³¿¬·±² °±·²¬ ©·¬¸·² ¿² »¯«·´¿¬»®¿´ ¬®·¿²¹´» ·-

·²¬»²¼»¼ ¬± ¿´»®¬ ¬¸» «-»® ¬± ¬¸» °®»-»²½» ±º ·³°±®¬¿²¬

±°»®¿¬·²¹ ¿²¼ ³¿·²¬»²¿²½» ø-»®ª·½·²¹÷ ·²-¬®«½¬·±²- ·²

¬¸» ´·¬»®¿¬«®» ¿½½±³°¿²§·²¹ ¬¸» ¿°°´·¿²½»ò

ÉßÎÒ×ÒÙæ ÌÑ ÐÎÛÊÛÒÌ Ú×ÎÛ ÑÎ ÍØÑÝÕ ØßÆßÎÜô ÜÑ ÒÑÌ ÛÈÐÑÍÛ ÌØ×Í ßÐÐÔ×ßÒÝÛ ÌÑ

Îß×Ò ÑÎ ÓÑ×ÍÌËÎÛò

ÝßËÌ×ÑÒæ ÌÑ ÐÎÛÊÛÒÌ ÛÔÛÝÌÎ×Ý ÍØÑÝÕ ÜÑ ÒÑÌ ËÍÛ ÌØ×Í ÐÑÔßÎ×ÆÛÜ ÐÔËÙ É×ÌØ ßÒ

ÛÈÌÛÒÍ×ÑÒ ÝÑÎÜô ÎÛÝÛÐÌßÝÔÛ ÑÎ ÑÌØÛÎ ÑËÌÔÛÌ ËÒÔÛÍÍ ÌØÛ ÞÔßÜÛÍ

ÝßÒ ÞÛ ÚËÔÔÇ ×ÒÍÛÎÌÛÜ ÌÑ ÐÎÛÊÛÒÌ ÞÔßÜÛ ÛÈÐÑÍËÎÛò

ÝßËÌ×ÑÒæ Ì¸»-» -»®ª·½·²¹ ·²-¬®«½¬·±²- ¿®» º±® «-» ¾§ ¯«¿´·º·»¼ -»®ª·½» °»®-±²²»´ ±²´§ò Ì± ®»¼«½» ¬¸»

®·-µ ±º »´»½¬®·½ -¸±½µô ¼± ²±¬ °»®º±®³ ¿²§ -»®ª·½·²¹ ±¬¸»® ¬¸¿² ¬¸¿¬ ½±²¬¿·²»¼ ·² ¬¸» ±°»®¿¬·²¹ ·²-¬®«½¬·±²-

«²´»-- §±« ¿®» ¯«¿´·º·»¼ ¬± ¼± -±ò

×³°±®¬¿²¬ Í¿º»¬§ ×²-¬®«½¬·±²-

ï÷ Î»¿¼ ¬¸»-» ·²-¬®«½¬·±²-ò

î÷ Õ»»° ¬¸»-» ·²-¬®«½¬·±²-ò

í÷ Ø»»¼ ¿´´ ©¿®²·²¹-ò

ì÷ Ú±´´±© ¿´´ ·²-¬®«½¬·±²-ò

ë÷ Ü± ²±¬ «-» ¬¸·- ¿°°¿®¿¬«- ²»¿® ©¿¬»®ò

ê÷ Ý´»¿² ±²´§ ©·¬¸ ¼®§ ½´±¬¸ò

é÷ Ü± ²±¬ ¾´±½µ ¿²§ ª»²¬·´¿¬·±² ±°»²·²¹-ò ×²-¬¿´´ ·² ¿½½±®¼¿²½» ©·¬¸ ¬¸» ³¿²«º¿½¬«®»®ù- ·²-¬®«½¬·±²-ò

è÷ Ü± ²±¬ ·²-¬¿´´ ²»¿® ¿²§ ¸»¿¬ -±«®½»- -«½¸ ¿- ®¿¼·¿¬±®-ô ¸»¿¬ ®»¹·-¬»®-ô -¬±ª»-ô ±® ±¬¸»® ¿°°¿®¿¬«- ø·²½´«¼·²¹

¿³°´·º·»®-÷ ¬¸¿¬ °®±¼«½» ¸»¿¬ò

ç÷ Ð®±¬»½¬ ¬¸» °±©»® ½±®¼ º®±³ ¾»·²¹ ©¿´µ»¼ ±² ±® °·²½¸»¼ °¿®¬·½«´¿®´§ ¿¬ °´«¹-ô ½±²ª»²·»²½» ®»½»°¬¿½´»-ô ¿²¼ ¬¸»

°±·²¬ ©¸»®» ¬¸»§ »¨·¬ º®±³ ¬¸» ¿°°¿®¿¬«-ò

ïð÷ Ñ²´§ «-» ¿¬¬¿½¸³»²¬-ñ¿½½»--±®·»- -°»½·º·»¼ ¾§ ¬¸» ³¿²«º¿½¬«®»®ò

ïï÷ Ë-» ±²´§ ©·¬¸ ¬¸» ½¿®¬ô -¬¿²¼ô ¬®·°±¼ô ¾®¿½µ»¬ô ±® ¬¿¾´» -°»½·º·»¼ ¾§ ¬¸» ³¿²«º¿½¬«®»®ô

±® -±´¼ ©·¬¸ ¬¸» ¿°°¿®¿¬«-ò É¸»² ¿ ½¿®¬ ·- «-»¼ô «-» ½¿«¬·±² ©¸»² ³±ª·²¹ ¬¸» ½¿®¬ñ

ß°°¿®¿¬«- ½±³¾·²¿¬·±² ¬± ¿ª±·¼ ·²¶«®§ º®±³ ¬·°ó±ª»®ò

ïî÷ Ë²°´«¹ ¬¸·- ¿°°¿®¿¬«- ¼«®·²¹ ´·¹¸¬²·²¹ -¬±®³- ±® ©¸»² «²«-»¼ º±® ´±²¹ °»®·±¼- ±º ¬·³»ò

ïí÷ Î»º»® ¿´´ -»®ª·½·²¹ ¬± ¯«¿´·º·»¼ -»®ª·½» °»®-±²²»´ò Í»®ª·½·²¹ ·- ®»¯«·®»¼ ©¸»² ¬¸» ¿°°¿®¿¬«- ¸¿- ¾»»² ¼¿³¿¹»¼

·² ¿²§ ©¿§ô -«½¸ ¿- °±©»®ó-«°°´§ ½±®¼ ±® °´«¹ ·- ¼¿³¿¹»¼ô ´·¯«·¼ ¸¿- ¾»»² -°·´´»¼ ±® ±¾¶»½¬- ¸¿ª» º¿´´»² ·²¬± ¬¸»

¿°°¿®¿¬«-ô ¬¸» ¿°°¿®¿¬«- ¸¿- ¾»»² »¨°±-»¼ ¬± ®¿·² ±® ³±·-¬«®»ô ¼±»- ²±¬ ±°»®¿¬» ²±®³¿´´§ô ±® ¸¿- ¾»»² ¼®±°°»¼ò

ïì÷Ì¸» ¿°°¿®¿¬«- -¸¿´´ ²±¬ ¾» »¨°±-»¼ ¬± ¼®·°°·²¹ ±® -°´¿-¸·²¹ ¿²¼ ¬¸¿¬ ²± ±¾¶»½¬- º·´´»¼ ©·¬¸ ´·¯«·¼-ô -«½¸ ¿- ª¿-»-ô

-¸¿´´ ¾» °´¿½»¼ ±² ¬¸» ¿°°¿®¿¬«-ò

ïë÷Ì¸» ³¿·²- °´«¹ ±® ¿°°´·¿²½» ·²´»¬ ·- «-»¼ ¿- ¬¸» ¼·-½±²²»½¬ ¼»ª·½»ô ®»³¿·² ·¬ ®»¿¼·´§ ±°»®¿¾´» ¼«®·²¹ ¬¸»

¿°°¿®¿¬«- ²±®³¿´

«-»ò

×²¬®±¼«½¬·±²

ÝÑÒÌÛÒÌ

ïð

ïï

ïî

ïí

ïì

ïë

ïê

ïé

ïè

ïç

îð

îï

îî

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Î»³±¬» Ý±²¬®±´òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ý±²²»½¬·±² ×²-¬®«½¬·±²-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Û¨¬»®²¿´ »¯«·°³»²¬ Ý±²²»½¬·±²-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

ß²¬»²²¿ Ý±²²»½¬·±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Û¨¬»®²¿´ ßÊ Í±«®½» Í»¬«°òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ý±²²»½¬·±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

ØÜÓ× ×² òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Þ¿-·½ Ñ°»®¿¬·²¹ ×²-¬®«½¬·±²-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Í©·¬½¸·²¹ ¬¸» ÌÊ Ñ² ±® Ñººòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ó«¬»òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Í´»»° ¾«¬¬±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

óÞ«¬¬±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

ÝØòÔ×ÍÌ ¾«¬¬±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

ÚßÊòÔ×ÍÌ ¾«¬¬±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

ßÎÝ ¾«¬¬±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ó»²« Ñ°»®¿¬·±²-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ð·½¬«®» Ó»²« Ñ°¬·±²-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ø±© ¬± ½«-¬±³·¦» §±«® ±©² °·½¬«®» -¬¿¬«-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

ß«¼·± Ó»²« Ñ°¬·±²-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ø±© ¬± Ý«-¬±³·¦» §±«® ±©² ¿«¼·± -¬¿¬«-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ý¸¿²²»´- Ó»²« Ñ°¬·±²-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Í»¬¬·²¹- Ó»²« Ñ°¬·±²-òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ý´±-»¼ Ý¿°¬·±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ý±³°±²»²¬ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ð®±¼«½¬ Í°»½·º·½¿¬·±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

Ì®±«¾´»-¸±±¬·²¹òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò

ÌÊ ½±³°±²»²¬-

ß½½»--±®·»-

ÊÝÎ ½±²²»½¬·±²

ÜÌÊ ½±²²»½¬·±²

Ü·¹·¬¿´ ß«¼·± Ñ«¬°«¬

°«¬

Ý¿¾´» -¿³°´»

Î»³±ª·²¹ ¬¸» ¬¿¾´» -¬¿²¼ ¿²¼ ·²-¬¿´´·²¹ ¿ ©¿´´ ³±«²¬ ¾®¿½µ»¬

Ì«®²·²¹ ±² §±«® ÌÊ º±® ¬¸» º·®-¬ ¬·³»

ÍßÐ Þ®±¿¼½¿-¬- Í»¬«°

ß«¬±³¿¬·½¿´´§ -½¿²²·²¹ º±® ½¸¿²²»´-

Í»¬¬·²¹ «° ¿ º¿ª±®·¬» ½¸¿²²»´ ´·-¬

ß¼¼·²¹ ±® ½¸¿²¹·²¹ ¿ ½¸¿²²»´ ´¿¾»´

Ý¸»½µ·²¹ ¬¸» ÜÌÊ -·¹²¿´ -¬®»²¹¬¸

Ì«®²·²¹ ±² ß«¬± Æ±±³

ß¼¶«-¬·²¹ ¬·³» -»¬¬·²¹-

Í»¬¬·²¹ ¬¸» -´»»° ¬·³»®

ß¼¶«-¬·²¹ ³»²« -»¬¬·²¹-

Ô¿¾»´·²¹ ¿² ·²°«¬ -±«®½»

Ý±³°«¬»® ±® Í»¬¬·²¹-

Ó¿·²¬»²¿²½»

ÜÊÜ ½±²²»½¬·±²

ÊÙß

ß¼¼·²¹ ±®

-µ·°°·²¹ ½¸¿²²»´-

V component

1.POWER: Press to turn on and off the TV.

3.INPUT: Press to access the input source mode.In the MENU/INPUT screen, these buttons serve as OK buttons.

2.MENU: Menu display.

4.VOL+/- : Press to adjust the volume .In the MENU screen, these buttons serve as left/right buttons.

5.CH+/- : Press to scan through channels. To scan quickly through channels, press and hold down either +/- . In the

MENU screen, these buttons serve as up/down buttons.

6.Power indicator

7.Remote Sensor: Receives IR signals from the remote control. Do not put anything near the sensor, which may

block the remote control signal.

Back

Front and side panels

ENU INPUT VOL+ VOL- CH+ CH- POWE

DC IN

VIDEO

AV IN

COMPONENT

Y Pb Pr

USB

PC/DVI

AUDIO IN

PC IN

L -AUDIO- R

L R

L -AUDIO- R

HDMI IN

ANT IN

DIGITAL OUT

(COAXIAL)

1.DC IN:Direct current input.

2.Headphone jack:Headphone audio output terminal.

3.USB input:Connect a USB flash drive to view MPEG2 videos, JPEG images or listen to MP3 songs.

4.Digital Out:Connect various types of digital audio equipment.

5.HDMI In:Connect a HDMI device to receive digital audio and uncompressed digital video.

6.VIDEO In:Connect the video signal from a video device to this jack.

7.Component Input:Connect a component video device to these jacks.

8.AUDIO In:Connect the audio L/R cables from the video signal source to these jacks.

9.AUDIO In:Connect the audio L/R cables from the video signal source to these jacks.

10.PC Audio In:Connect the audio L/R cables from a computer to this jack.

11.AUDIO OUT:Connect the audio L/R cables to your audio equipment.

12.PC Video In:Connect a video cable from a computer to this jack.

13.Antenna Input:Connect cable or antenna signals to the TV

, either directly or through your cable box.

×²¬®±¼«½¬·±²

Ì¸» ®»³±¬» ½±²¬®±´ ½¿²²±¬ ¾» ±°»®¿¬»¼ «²´»-- ¬¸» ¾¿¬¬»®·»- ¿®» °®±°»®´§ ´±¿¼»¼ò

É¸»² «-·²¹ ¬¸» ®»³±¬» ½±²¬®±´ô ¿·³ ·¬ ¿¬ ¬¸» ®»³±¬» ½±²¬®±´ -»²-±® ±² ¬¸» ÌÊò

Ú«²½¬·±² ·²¬®±¼«½¬·±²

Î»³±¬» Ý±²¬®±´

ïòÐ®»-- ¬± ¬«®² ±² ¿²¼ ±ºº ¬¸» ÌÊò

îòÐ®»-- ®»°»¿¬»¼´§ ¬± ½§½´» ¬¸®±«¹¸ ¬¸» ¿ª¿·´¿¾´» °·½¬«®» ³±¼»-ò

íòÐ®»-- ¬± ½¸¿²¹» ¬¸» ¿-°»½¬ ®¿¬·±ò

ìòÍ»´»½¬ ¿ ½´±-»¼ ½¿°¬·±² ±°¬·±²ò

ëòÍ¸±© ¬¸» ·²°«¬ -±«®½»ò

êòÐ®»-- ¬± ±°»² ¬¸» ±²ó-½®»»² ³»²«ò

éò

èòÛ¨·¬ Ñ² Í½®»»² Ü·-°´¿§ò

çò

ïðòÐ®»-- ¬± ¼·-°´¿§ ¬¸» ÌÊ -¬¿¬«- ·²º±®³¿¬·±² ±² ¬¸» ¬±° ±º ¬¸» ÌÊ

-½®»»²ò

ïïòÍ¸±©- °®±¹®¿³ -½¸»¼«´» ·² ÌÊò

ïîòÐ®»-- ¬± ½§½´» ¬¸®±«¹¸ ¼·ºº»®»²¬ -±«²¼ -»¬¬·²¹-ò

ïíòÐ®»-- ¬± ¼·-°´¿§ ¬¸» -´»»° ¬·³»® ±°¬·±²ò

ïìòÍ»´»½¬ ÓÑÒÑô ÍÌÛÎÛÑô ÍßÐ ·² ÒÌÍÝ -§-¬»³ò

ïëòÐ®»-- ¬± ½¸¿²¹» ¿ ½¸¿²²»´ò

ïêòÐ®»-- ¬± -»´»½¬ ¼·¹·¬¿´ ½¸¿²²»´-ò Ú±® »¨¿³°´»ô ¬± »²¬»® •ëìóíŒô

°®»-- •ëìŒô •ó Œ ¿²¼ •íŒò

ïéòÍ©·¬½¸»- ¬¸» ÌÊ -±«²¼ ±² ±® ±ººò

ïèò

îðòÑ°»² ¬¸» ½¸¿²²»´ ´·-¬ ·² ÌÊò

îïòÑ°»² ¬¸» º¿ª±®·¬» ½¸¿²²»´ ´·-¬ ·² ÌÊò

Ð®»-- ÝØõ ±® ÝØó ¬± ¹± ¬± ¬¸» ²»¨¬ ±® °®»ª·±«- ½¸¿²²»´ ·² ¬¸»

½¸¿²²»´ ´·-¬ò

Ð®»-- ÊÑÔõ ±® ÊÑÔó ¬± ·²½®»¿-» ±® ¼»½®»¿-» ¬¸» ª±´«³»ò

Ð®»-- ¬± ½±²º·®³ -»´»½¬·±²- ·² ¿² ±²ó-½®»»² ³»²« ±® ¬± ±°»²

¿ -«¾³»²«ò

ïçòÐ®»-- ¬± ¹± ¬± ¬¸» ´¿-¬ ª·»©»¼ ½¸¿²²»´ò

²± ¿ª¿·´¿¾´»ò

ïð

ïï

ïî

ïí

ïì

ïë

ïê

ïé

ïè

ïç

îð

îï

×²-¬¿´´¿¬·±²

Ù»²»®¿´´§ -°»¿µ·²¹ô ¬± »²¶±§ ¿ ½´»¿®»® °·½¬«®»ô ©» ®»½±³³»²¼ ¬¸¿¬ §±« «-» ¿ ÝßÌÊ -§-¬»³ ±® ¿²

±«¬¼±±® ¿²¬»²²¿ ò

Ñª»®ó¬¸»ó¿·® ÌÊ ®»½»°¬·±² ¯«¿´·¬§ ©·´´ ¼»°»²¼ ±² §±«® ¿²¬»²²¿ ¬§°»ô ¿²¬»²²¿

´±½¿¬·±² ¿²¼ ¿²¬»²²¿ °±-·¬·±²·²¹

Û¨¬»®²¿´ Û¯«·°³»²¬ Ý±²²»½¬·±²-

ß²¬»²²¿ Ý±²²»½¬·±²

Ó«´¬·óº¿³·´§ Ü©»´´·²¹-ñß°¿®¬³»²¬-

øÝ±²²»½¬ ¬± ©¿´´ ¿²¬»²²¿ -±½µ»¬÷

É¿´´ ß²¬»²²¿

Í±½µ»¬

Í·²¹´»óº¿³·´§ Ü©»´´·²¹- ñØ±«-»-

øÝ±²²»½¬ ¬± ©¿´´ ¶¿½µ º±® ±«¬¼±±® ¿²¬»²²¿÷

Ñ«¬¼±±®

ß²¬»²²¿

ÊØÚ ß²¬»²²¿

ËØÚ ß²¬»²²¿

Ì«®² ½´±½µ©·-» ¬± ¬·¹¸¬»²

ÎÚ Ý±¿¨·¿´ É·®» øéë ±¸³÷

Þ®±²¦» É·®»

Þ» ½¿®»º«´ ²±¬ ¬± ¾»²¼ ¬¸» ¾®±²¦» ©·®»

©¸»² ½±²²»½¬·²¹ ¬¸» ¿²¬»²²¿ò

Þ®±²¦» É·®»

Ì± ·³°®±ª» ¬¸» °·½¬«®» ¯«¿´·¬§ ·² ¿ °±±® -·¹²¿´ ¿®»¿ô

°´»¿-» °«®½¸¿-» ¿ -·¹²¿´ ¿³°´·º·»® ¿²¼ ·²-¬¿´´ °®±°»®´§ò

×º ¬¸» ¿²¬»²²¿ ²»»¼- ¬± ¾» -°´·¬ º±® ¬©± ÌÊÀ-ô ·²-¬¿´´

¿ îóÉ¿§ Í·¹²¿´ Í°´·¬¬»® ·² ¬¸» ½±²²»½¬·±²-ò

Ì± ·²-¬¿´´ ¬¸» ¿²¬»²²¿ °®±°»®´§ °´»¿-» ½±²¬¿½¬ ¿

°®±º»--·±²¿´ ·² §±«® ¿®»¿ò

ß½½»--±®·»-

Î»³±¬» ½±²¬®±´

Ñ©²»®À- ³¿²«¿´

ß´µ¿´·²» ¾¿¬¬»®§øßßß÷ î

Ð´» ¿-» ÎÛ ßÜ ¬¸·- ³ ¿²«¿´ ½ ¿®»º« ´´§ ¾»º ±®»

±°» ®¿¬·² ¹ §±«® Ì Êô¿ ²¼ ®»¬¿ ·² ·¬ º± ® º«¬«® »

®»º» ®»²½ »ò

ÌÚÌóÔÝÜ ÌÊ

ÑÉÒÛ Î Í ÓßÒËßÔù

Ý±²²»½¬·±² ×²-¬®«½¬·±²-

VCR connection

NOTE: All cables shown are not included with the TV.

There are several ways to connect your television, depending on the components you want to connect

and the quality of the signal you want to achieve. The following are examples of some different ways

to connect your TV with different input sources.

Choose Your Connection

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

Connection Option 1

Set VCR output switch to channel 3 or 4 and

then tune the TV to the same channel number.

Connection Option 2

1. Connect the audio and video cables from the

VCR's output jacks to the TV input jacks, as

shown in the figure.

When connecting the TV to VCR, match the

jack colors (Video = yellow, Audio Left = white,

and Audio Right = red).

If you connect an S-VIDEO output from VCR to

the S-VIDEO input, the picture quality is

improved; compared to connecting a regular

VCR to the Video input.

2. Insert a video tape into the VCR and press

PLAY on the VCR. (Refer to the VCR owner`s

manual.)

3. Select the input source with using the

INPUT button on the remote control, and

then press CH+/- button to select the source,

press the OK button to confirm.

Installation

Connection Instructions

How to connect

Connect the audio and video cables from the external

equipment's output jacks to the TV input jacks, as shown

in the figure. When connecting the TV to external equipment,

match the jack colors (Video = yellow, Audio Left = white,

and Audio Right = red).

How to use

1. Select the input source with using INPUT button on

the remote control.

2. Press CH+/- button to select the desired source.

3. Press OK button to confirm.

4. Operate the corresponding external equipment.

External A/V Source Setup

VIDEO

AV IN

L R

L -AUDIO- R

ANT IN

VIDEO

AV IN

L R

L -AUDIO- R

Installation

How to connect

1. Connect the DVD video outputs (COMPONENT) to

the Y Pb Pr jacks on the TV and connect the DVD audio

outputs to the Y Pb Pr Audio IN jacks on the TV, as

shown in the figure.

2. If your DVD only has an S-VIDEO output jack,

connect this to the S-VIDEO input on the TV. as shown

in the figure.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use INPUT button on the remote control to select

mode.

3. Press Play button on external equipment for program

play.

4. Refer to the DVD player's manual for operating

instructions.

Pb Pr

Component Input ports

To get better picture quality, connect a DVD player to the

component input ports as shown below.

Component ports

on the TV

Video output ports

on DVD player

Y Pb Pr

Y B-Y R-Y

Y Cb Cr

Y P P

B R

Component Setup

Connection Instructions

After subscribing to a cable TV service from a local provider

you can watch cable TV programming. The TV cannot

display TV programming unless a TV tuner device or cable

TV converter box is connected to the TV.

For further information regarding cable TV service, contact

your local cable TV service provider(s).

Connection Option 1

1. Select 3 or 4 with channel switch on cable box.

2.Tune the TV channel to the same selected output

channel on cable box.

3.Select channels at the cable box or with the cable box

remote control.

Connection Option 1

1. Connect the audio and video cables from the Cable

Box's output jacks to the TV input jacks, as shown in the

figure. When connecting the TV to a Cable Box, match the

jack colors (Video = yellow, Audio Left = white, and Audio

Right = red).

2. Select the input source by using the INPUT button on the

remote control or on the TV.

3.Select your desired channel with the remote control for

cable box.

Cable TV Setup

COMPONENT

Y Pb Pr L -AUDIO- R

VIDEO

AV IN

L R

L -AUDIO- R

ANT IN

Installation

How toconnect

1. To get the best picture quality, adjustthe PC graphics card to 1024

2. Use the TV`s VGA or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your

VGA connector.

If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of

either VGA r HDMI/DVI IN to display the PC on the TV.

If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to eithe VGA

DVI; (the other mode is set to Plug and Play automatically by the TV.)

3. Then,make the corresponding audioconnection. If using a sound card, adjust thePC soundas required.

How touse

1. Turn on the PC and the TV.

2. Turn on thedisplay by pressingthe POWER button on theTV's remotecontrol.

3. Use INPUT onthe remote control to select PCor HDMI source.

4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or

brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to

another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the

PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic

card.

Note

1.Use a HDMI to DVI cable.

2.Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become

permanently imprinted on the screen.

3. Thesynchronization input formfor Horizontal andVertical frequenciesis separate.

x768 .

IN o

r or

HDMI/

Resolution

Frame

frequency

(Hz)

VGA

SVGA

XGA

60Hz

800x600

1024x768

60Hz

Mode

Resolution

75Hz

Connecting a computer

Connection Instructions

640x480

1280x768

HDMI Input

How To Connect

How To Use

Connect the cables from the external equipment's output

jacks to the TV input jacks, as shown in the figure.

Select the input source by using INPUT button on the

remote control or on the TV.

2.Operate the corresponding external equipment.

Refer to external equipment operating guide.

PC/DVI AUDIO IN

PC IN

PC/DVI AUDIO IN

PC IN

HDMI IN

DIGITAL OUT

(COAXIAL)

HDM

Operation

In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an example to help

you with the TV operation.

There are several options you might need to set up in order for your TV to work properly. Read the instructions that

follow.

1. Choose the TV source and then press MENU button.

2. Press VOL+/- to select SETTINGS menu.

3. Press CH-/OK, then press CH+/- to select the

4. Press VOL+/OK, the opens.

5. Press CH+/- to select language you want.

You can select English

Settings

Menu Settings

Korea

Basic Operating Instructions

Turning on your TV for the first time

To turn on and configure your TV:

1 Make sure that you have inserted the batteries in the remote control, connected the antenna to the TV, and

connected the AC power.

2 Press POWER , then wait several seconds. The power indicator LED turns blue and the TV turns on.

Note

If the TV in power on , the screen show information according the type of input signal . the information will disappear.

If there is no signal , NO SIGNAL will display on the screen.

3 Select the signal source for your TV change the picture source so you can watch your TV, cable TV, VCR,

DVD, or any other devices that are connected to your TV.

1. Press INPUT to open the signal source menu and then press CH+/- button to select the s

2. Press VOL+/OK button to confirm .

4 Select the TV signal source for your TV and auto scan for channels

ource TV, Composite,

Component, , HDMI, USB .PC

1. Press MENU ,then press VOL+/- to select CHANNELS menu.

2. Press CH-/OK, the CHANNELS menu opens.

3. Press CH+/- to select the Auto Channels Search . Press

VOL+/OK the Auto Channels Search menu opens.

4. Press CH+/- to select Antenna or Cable , then press OK.

A checkmark appears in the circle next to your choice.

Press CH+/- to select START, then press VOL+/OK. The TV

automatically scans and memorizes all the active, available

channels in your area.

5 Set the volume of your TV by pressing VOL+ or VOL-.

6 Choose the Menu Language

7 Select the channel you want by pressing CH+/CH- to go to the next or previous channel, or directly by

pressing the number buttons.

Í©·¬½¸·²¹ ¬¸» ÌÊ Ñ² ±® Ñºº

ï Ú·®-¬ô ½±²²»½¬ °±©»® ½±®¼ ½±®®»½¬´§ò

î Ð®»-- °±©»® ¾«¬¬±²ò Ç±«® ÌÊ ¬«®²- ±²ò

í Ð®»-- ¿¹¿·² ¬± ¬«®² ±ºº §±«® ÌÊò É¸»² §±« ¬«®² ±ºº §±«® ÌÊô ·¬ ¹±»- ·²¬± -¬¿²¼¾§ ³±¼»ò

É¿®²·²¹æ É¸»² §±«® ÌÊ ·- ·² -¬¿²¼¾§ ³±¼»ô ·¬ ·- -¬·´´ ®»½»·ª·²¹ °±©»®ò Ì± ½±³°´»¬»´§ ¼·-½±²²»½¬ °±©»®ô «²°´«¹ ¬¸»

°±©»® ½±®¼ò

Ò±¬»æ ×º §±«® ÌÊ ¼±»- ²±¬ ®»½»·ª» ¿² ·²°«¬ -·¹²¿´ º±® -»ª»®¿´ ³·²«¬»-ô ·¬ ¿«¬±³¿¬·½¿´´§ ¹±»- ·²¬± -¬¿²¼¾§ ³±¼»ò

Ó«¬»

ïòÐ®»-- ÓËÌÛ ¾«¬¬±² ¬± ³«¬» ¬¸» -±«²¼ ¬»³°±®¿®·´§ò ß ³«¬» ·½±² ¿°°»¿®- ±² ¬¸» -½®»»²ò

îòÐ®»-- ÓËÌÛ ¾«¬¬±² ±® ÊÑÔõ ¿¹¿·² ¬± ®»-¬±®» ¬¸» -±«²¼ò

Ì¸» ³«¬» ·½±² ¼·-¿°°»¿®-ò

Í´»»° ¾«¬¬±²

Ð®»-- ÍÔÛÛÐ ¾«¬¬±² ¬± -»¬ ¬¸» ¬·³» æ Ñººóë ³·²óïð ³·²óïë ³·²óíð ³·²óìë³·²óêð ³·²óçð ³·²óïîð ³·²óïèð ³·²óîìð³·²ò

Ì¸·- º»¿¬«®» ¿´´±©- §±« ¬± ¬«®² ±ºº ¬¸» ¬»´»ª·-·±² ¿º¬»® ¿ °®»ó-»´»½¬»¼ ²«³¾»® ±º ³·²«¬»-

ó Þ«¬¬±²

Ð®»-- ¬± -»´»½¬ ¿¼¼·¬·±²¿´ ½¸¿²²»´- ø¼·¹·¬¿´ ¿²¼ ¿²¿´±¹÷ ¾»·²¹ ¾®±¿¼½¿-¬ ¾§ ¬¸» -¿³» -¬¿¬·±²ò Ú±® »¨¿³°´»ô ¬± -»´»½¬

¼·¹·¬¿´ ½¸¿²²»´ •ïïóïŒô °®»-- •ïïŒô ¬¸»² °®»-- • ó Œ ¿²¼ •ïŒò

ÝØòÔ×ÍÌ ¾«¬¬±²

Ð®»-- ¬± ¼·-°´¿§ ¬¸» °®±¹®¿³ ´·-¬ò Ð®»-- ÝØõñó ¬± -»´»½¬ ¬¸» ·¬»³ ¿²¼ ÑÕ ¾«¬¬±² ¬± -»´»½¬ ¬¸» ½¸¿²²»´ §±« ¼»-·®»¼ò

ÚßÊÑÎ×ÌÛ ¾«¬¬±²

ß¼¼·²¹ º¿ª±®·¬» ½¸¿²²»´-

Ð®»--

ÝØòÔ×ÍÌò Ì¸» ½¸¿²²»´ ´·-¬ ±°»²-ò Ð®»-- ÝØõñó ¬± -»´»½¬ ¿ ½¸¿²²»´ò

Ð®»-- ÚßÊÑÎ×ÌÛ ¬± ¿¼¼ ¬¸» ½¸¿²²»´ ¬± ¬¸» º¿ª±®·¬»- ½¸¿²²»´ ´·-¬ò

Ì± ®»³±ª» ¿ º¿ª±®·¬» ½¸¿²²»´ô ±°»² ¬¸» ½¸¿²²»´ ´·-¬ô -»´»½¬ ¬¸» ½¸¿²²»´ §±« ©¿²¬ ¬± ®»³±ª»ô ¬¸»² °®»-- ÚßÊÑÎ×ÌÛò

Ì«²·²¹ ¬± ¿ º¿ª±®·¬» ½¸¿²²»´

Ð®»-- ÚßÊÑÎ×ÌÛ Ì¸» º¿ª±®·¬» ½¸¿²²»´ ´·-¬ ±°»²-ò

Ð®»-- ÝØõñó ¬± -»´»½¬ ¬¸» ½¸¿²²»´ò

Ç±«® ÔÝÜ ÌÊ ¿«¬±³¿¬·½¿´´§ ¬«²»- ¬± ¬¸» ½¸¿²²»´ §±« -»´»½¬»¼ò

ÍßÐ Þ®±¿¼½¿-¬- Í»¬«°

Ì¸·- ÌÊ ½¿² ®»½»·ª» ÓÌÍ -¬»®»± °®±¹®¿³- ¿²¼ ÍßÐ øÍ»½±²¼¿®§ ß«¼·± Ð®±¹®¿³÷ ¬¸¿¬ ¿½½±³°¿²·»- ¬¸» -¬»®»±

°®±¹®¿³å ·º ¬¸» -¬¿¬·±² ¬®¿²-³·¬- ¿² ¿¼¼·¬·±²¿´ -±«²¼ -·¹²¿´ ¿- ©»´´ ¿- ¬¸» ±®·¹·²¿´ ±²»ò

É¸»² ¸¿ª·²¹ -»´»½¬»¼ ÍßÐ ¾«¬¬±² ±² ¬¸» ®»³±¬» ½±²¬®±´ô ¬¸·- ÌÊ ½¿² ±²´§ ®»½»·ª» ¬¸» -·¹²¿´ ©¸»² ¬¸» ÌÊ -¬¿¬·±²

¬®¿²-³·¬- ¬¸» °®±°»® -·¹²¿´-ò

Ó±²± -±«²¼ ·- ¿«¬±³¿¬·½¿´´§ ®»½»·ª»¼ ·º ¬¸» ¾®±¿¼½¿-¬ ·- ±²´§ ·² Ó±²±å »ª»² ¬¸±«¹¸ Í¬»®»± ±® ÍßÐ ¸¿- ¾»»² -»´»½¬»¼ò

Í»´»½¬ Ó±²± ·º §±« ©¿²¬ ¬± ´·-¬»² ¬± ³±²± -±«²¼ ¼«®·²¹ -¬»®»±ñÍßÐ ¾®±¿¼½¿-¬·²¹ò

Í¬»®»± ±® ÍßÐ ½¿² ¾» ®»½»·ª»¼ ·² ¿ ß²¿´±¹ ½¸¿²²»´ò

ïò Ë-» ÓÌÍñÍßÐ ¬± -»´»½¬ §±«® ¼»-·®»¼ ÓÌÍ ³±¼» ·² ¿ ¿²¿´±¹ -·¹²¿´ò Û¿½¸ ¬·³» §±« °®»-- ÓÌÍñÍßÐô Ó±²±ô

Í¬»®»±ô ¼«¿´ï ±® ¼«¿´î ¿°°»¿®ò ×º ±¬¸»® ´¿²¹«¿¹»- ¿®» ¿ª¿·´¿¾´» ±² ¬¸» ¼·¹·¬¿´ -·¹²¿´ô -»´»½¬ ¬¸»³ ©·¬¸ ¬¸»

ÓÌÍñÍßÐ ¾«¬¬±²ò

îò Ð®»-- ÛÈ×Ì ¬± -¿ª» ¿²¼ ®»¬«®² ¬± ÌÊ ª·»©·²¹ò

ßÎÝ ¾«¬¬±²

Í»´»½¬- ¬¸» ß-°»½¬ Î¿¬·±ò Ç±« ½¿² -»´»½¬ Æ±±³ô É·¼»ô Ý·²»³¿ ±® ²±®³¿´ò

Æ±±³ Ý¸±±-» Æ±±³ ©¸»² §±« ©¿²¬ ¬± ª·»© ¬¸» °·½¬«®» ©·¬¸±«¬ ¿²§ ¿´¬»®¿¬·±²ò Ø±©»ª»®ô ¬¸» ¬±° ¿²¼ ¾±¬¬±³

°±®¬·±²- ±º ¬¸» °·½¬«®» ©·´´ ¾» ½®±°°»¼ò

É·¼» Ý¸±±-» ©·¼» ©¸»² §±« ©¿²¬ ¬± ¿¼¶«-¬ ¬¸» °·½¬«®» ¸±®·¦±²¬¿´´§ô ·² ¿ ´·²»¿® °®±°±®¬·±² ¬± º·´´ ¬¸» »²¬·®» -½®»»²ò

Ý·²»³¿ Ú±® ´»¬¬»®¾±¨ °·½¬«®»-ô ¾¿®- ³¿§ ¿°°»¿® ±² ¬¸» ¬±° ¿²¼ ¾±¬¬±³ ±² -±³» °®±¹®¿³-ò

Ò±®³¿´ Ý¸±±-» ²±®³¿´ ©¸»² §±« ©¿²¬ ¬± ª·»© ¬¸» °·½¬«®» ©·¬¸ ±®·¹·²¿´ ¿-°»½¬ ®¿¬·± ±º ¬¸» ·²°«¬ -·¹²¿´ò

Þ¿-·½ Ñ°»®¿¬·²¹ ×²-¬®«½¬·±²-

Operation

Menu Operations

In this manual, the OSD (On Screen Display) may be differ from your TV .

These are examples to illustrate the TV's operation.

Press INPUT to select the input source. The menu for each source may be different .

1 Press MENU button to display the main menu, and VOL+/- to select the main menu .

2 Press CH-/OK button to enter the menu and CH+/- to go up and down to select the desired option .

3 Press VOL+/OK button to confirm and VOL+/- to make changes to the parameters.

4 Press EXIT/MENU button to exit the menu.

Picture Menu Options

How to customize your own picture status

CH+/-

VOL+/OK enu VOL+/-

The TV menu gives you an overview of the menus you can select.

Note

Depending on the input signal, one or more menu items may not

be selectable.

1 Press MENU ,then press VOL+/- to select PICTURE menu.

2 Press CH-/OK, then press to select an option.

3 Press , the m opens. then press to

adjust the option.

Mode

Select the picture mode. You can select Vivid/Standard/Energy Savings/Theater/Sports/Custom.

You can also press PICTURE on the remote control to select the picture Mode.

Brightness

Contrast

Color

Tint

Sharpness

Reset to Default Re

Adjusts the brightness.

Adjusts the contrast.

Adjusts the color saturation.

Adjusts the image tint.

Adjusts the sharpness.

Lets you set the following:

• Aspect Ratio Select Normal, Zoom, Wide, Cinema

• Overscan Turn this On to adjust the picture’s reproduction rate when receiving DVI signals in VIDEO format.

Availablewhen the signal uses EIA timing(480i/480p/720p/1080i).

• Color Temperature Select Cool (increased blue), Normal, or Warm (increased red).

• Backlight Adjusts the overall brilliance of the screen.

• Noise Reduction Selects the noise reduction mode to reduce picture noise (snow). Choose Off, Low, Middle or

High.

• Advanced Contrast Turn this On to optimize the picture display for a more vivid image.

sets all picture settings to factory default.

Advanced Video

Menu Operations

Audio Menu Options

Equalizer Mode

Selects the sound mode. You can select :

Standard, Theater (for movies), Music (for musical programs), News (for news programs), Custom for a customized

sound mode).

You can also press AUDIO one or more times to cycle through the available sound modes.

Equalizer Setting

Lets you set custom audio settings when you select Custom

This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening

position

Digital Audio/SPDIF

The TV can output Digital audio via the optical connector to an external amplifier or receiver.

Audio Language

Korea, English, Japan.

Balance

You can select RAW or PCM.

(DTV channels only)

Selects an alternate audio language, if available. You can select

Auto Volume Equalizes the overall volume levels for all channels.

Reset Audio Setting Resets all audio settings to factory default.

How to Customize your own audio status

1 Press MENU ,then press VOL+/- to select AUDIO menu.

2 Press CH-/OK ,then press CH+/- to select the desired items.

3 Press VOL+/OK, then press VOL+/- to adjust the setting.

4 When you are satisfied with your choice, press MENU

button to return to the previous menu or press EXIT button

to return to TV viewing.

Operation

1 Press MENU ,then press VOL+/- to select CHANNELS menu.

2 Press CH-/OK, then press CH+/- one or more times to select

the Auto Channels Search .

3 Press VOL+/OK. The Auto Channels Search opens.

4 Press CH+/- to select Antenna or Cable , then press OK.

A checkmark appears in the circle next to your choice.

5 Press CH+/- to select START, then press VOL+/OK.

The TV automatically scans and memorizes all the active,

available channels in your area.

All available channels are automatically preset in order. After

the search is completed, the first channel number displays on

the screen. This search automatically adds only the active

channels in your area to the TV's memory.

It deletes any channels on which there is no broadcast or a poor

signal. The channels found are automatically saved.

6 To cancel searching, press EXIT button.

Adding or skipping channels

You can delete channels from the channel list so that your TV

skips the channels when you press CH+/-. You can still tune to

the hidden channel by using the number buttons.

the Add/Skip Channels option, your LCD TV scans for channels

starting at 21.

CHANNELS

Add/Skip Channels

VOL+/OK. T Add/Skip Channels menu opens

1 Press MENU ,then press VOL+/- to select menu.

2 Press CH-/OK ,then press CH+/- one or more times to select

the .

3 Press he .

4 Press CH+/-or VOL+/- to highlight the channel you want to

skip (the default is to show the channel), then press

ENTER to remove the check mark from the channel.

Notes:

To add a channel that is being skipped, repeat Steps 1 to 4 and

press ENTER to return the checkmark to the channel.

5 To cancel searching, press EXIT button.

Menu Operations

Channels Menu Options

1 Press INPUT ,then press to select TV option.

2 Press OK, to select the TV signal source.

Automatically scanning for channels

Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the All

Channel List.

CH+/-

VOL+/

To select the TV signal source:

Operation

Menu Operations

Channels Menu Options

Setting up a favorite channel list

You can create a favorite channel list so you can quickly browse

through your favorite channels by pressing FAVORITE, then

selecting a channel from the favorite channel list.

1 Press MENU ,then press VOL+/- to select menu.

2 Press CH-/OK ,then press CH+/- one or more times to select

the Favorite .

3 Press he Favorite .

4 Press CH+/- to select the channel you want to add or remove,

then press OK to add or remove the channel from the list.

5 P close the menu.

6 To select a channel in your favorites list, press FAVORITE on

the remote control, press CH+/- to select the channel.

CHANNELS

VOL+/OK. T menu opens

ress EXIT .

1 Press MENU ,then press VOL+/- to select menu.

2 Press CH-/OK ,then press CH+/- one or more times to select

the .

3 Press he .

4 Press CH+/- to select the channel you want to label,

press VOL+/- to go to the channel label field.

5 Press CH+/- to select the number or symbol you want,

then press VOL+ to go to the next character. You can use as many

as ten characters to label a channel.

6 When you have finished entering a label, press OK to

confirm.

Notes:

To change a character, press VOL+/- to go to the character you

want to change, then press CH+/- to select a new character.

Repeat Steps 4 to 6 to label additional channels.

7 Press MENU to exit to the previous menu or EXIT to close the

menu.

CHANNELS

VOL+/OK. T menu opens

Channel Labels

Adding or changing a channel label

If a channel is not already labeled, you can label the channel to

make it easier to identify. You can also relabel a channel that is

already labeled.

2.0

Press he

Checking the DTV signal strength

You can check the DTV signal strength to determine if you need to

adjust your antenna or digital cable input. The signal strength, the

less likely you are to experience picture degradation.

1 Press MENU ,then press VOL+/- to select menu.

2 Press CH-/OK ,then press CH+/- one or more times to select

the .

3 Press he displaying the

signal strength of the channel.

4 P close the menu.

CHANNELS

VOL+/OK. T menu opens

Channel Strength

ress EXIT

Operation

Menu Operations

Channels Menu Options

Closed Caption

SETTINGS

Closed Caption

VOL+/OK. T Closed Caption menu opens

VOL+/OK

Caption m

Lets you turn closed captioning on or off. Also lets you set

closed caption options.

1 Press MENU ,then press VOL+/- to select menu.

2 Press CH-/OK ,then press CH+/- one or more times to select

the .

3 .

Press CH+/- to select the option, press to

open the sub-menu, then press CH+/-to set up. Options include:

ode Select CC Off , CC On, or CC On Mute .

Analog Caption For analog programming. Options

include: Automatic , English , or Korea .

Digital Caption For digital programming. Select

Automatic , CS1,CS2, CS3, CS4, Cs5, or Cs6.

Digital CC Settings To change digital closed caption

settings. Options include:

• Style Select either Automatic or Custom. When you

select automatic, the others are disabled and cannot be

adjusted.

• Size To select the size of the caption displayed.

• Text Color To select the text color or the opacity of the

text box of caption display. Select a color and one of the

opacity options.

• Text Opacity To specify the opacity for the text color.

• Background Color To select a background color.

• Background Opacity To select the opacity for the

background color.

4 Press MENU to return to the previous menu, or press EXIT to

close the menu.

You can also press CCD to turn closed captioning on or off.

Settings Menu Options

Korean

Operation

Menu Operations

Adjusting time settings

Lets you set the clock.

1 Press MENU ,then press VOL+/- to select SETTINGS menu.

2 Press CH-/OK ,then press CH+/- one or more times to select

the Time .

3 Press VOL+/OK. The Time menu opens.

Press CH+/- to enter the option. Options include:

Mode Press VOL+/OK toopen the sub-menu, then

press CH+/- to select Manual or Auto. To set the time

manually, select Manual. When Auto is selected, the time is

set automatically and cannot be adjusted.

Clock

Off Time

On Time

Settings Menu Options

ress EXIT

Setting the sleep timer

Lets you set the sleep timer.

You can specify the amount of time you want your TV to wait before it

automatically turns off.

1 Press MENU ,then press VOL+/- to select menu.

2 Press CH-/OK ,then press CH+/- one or more times to select

the Time .

3 Press he Time .

Press CH+/- to select Sleep Timer , then press .

The Sleep Timer menu opens.

4 Press CH+/- to select the time interval that you want your

TV to remain on, then press OK to confirm the setting. A

checkmark appears next to the setting you selected.

Note: To turn off the sleep timer, select Off.

6 Press EXIT to close the menu.

Note: You can also press SLEEP on the remote control to

set the sleep timer.

Adjusting menu settings

Lets you set menu language and menu transparency.

1 Press MENU button, then press VOL+/- to select

SETTINGS menu.

2 Press CH-/OK, then press CH+/- to select the

3 Press VOL+/OK, the menu opens.

4 Press CH+/- to select language you want.

Options include:

Transparency Press VOL+/-to adjust how transparent

the TV menu appears.

Language Press VOL+/OK to enter the sub-menu,

then press CH+/- to select the menu language from

English .

5 P close the menu.

SETTINGS

VOL+/OK. T menu opens

VOL+/OK

Settings

Menu Settings

Korea

120

180

240

Language

Menu Operations

Labeling an input source

Lets you label a device connected to your TV’s input jacks.

1 Press MENU button, then press VOL+/- to select

SETTINGS menu.

2 Press CH-/OK, then press CH+/- to select the

3 Press VOL+/OK, the menu opens.

4 Press CH+/- to select the option, then press VOL+/- to

change the setting.

Options include:

Input To select the input to label.

Label To select the label. Options include:

• Custom Select this option to input your own label.

• VCR

• DVD

• Set Top Box

• Satellite

• Cable Box

• Game

• PC

Custom To enter a custom label. Press VOL+/- to

move between fields and press CH+/- to select the

number of symbol you want (up to ten) to label the input.

Press OK to confirm.

Reset Input Labels To reset all input labels to factory

default.

5 Repeat Step 4 to enter additional labels.

6 Press MENU to return to the previous menu, or press EXIT to

close the menu.

Computer or Settings

Lets you adjust picture settings to optimize a computer display.

1 Press MENU button, then press VOL+/- to select

SETTINGS menu.

2 Press CH-/OK, then press CH+/- to select the Computer Settings .

3 Press VOL+/OK, the Computer Settings menu opens.

4 Press CH+/- to select the option, then press VOL+/OK to adjust.

You can select:

Auto Adjust Automatically adjusts the image settings,

such as position and phase

H-Position Moves the image right or left

V-Position Moves the image up or down

Clock Adjust the clock setting of the picture

Phase Adjusts the focus of stable images

Reset Computer Settings Resets computer settings to

factory default

sets all picture settings to factory default.

Input Labels

Component

Reset to Default Re

Settings Menu Options

Page is loading ...

Haier HE24D4MFA User manual

Brand: Haier

Model: HE24D4MFA

Category: LCD TVs

Type: User manual

Download PDF

report

in other languages

italiano: Haier HE24D4MFA Manuale utente

Haier HE24D4MFA User manual

Haier HE24D4MFA User manual

in other languages

Related papers

Other documents