TC Electronic VISCOUS VIBE Quick start guide

Type
Quick start guide
(1) (6)
(2)
(3)
(5)
(8)
(4) (9)
(7)
Quick Start Guide
VISCOUS VIBE
Visit musictribe.com to download the full manual
V 1.0
2 3VISCOUS VIBE VISCOUS VIBE
(EN) Controls
(1)
USB - Connects to your computer for rmware updates
and TonePrint editing.
(2)
Type - Choose between Chorus, TonePrint and
Vibrato settings.
(3)
Intensity - Controls the depth of the modulation eect.
(4)
Output
(5)
Footswitch - Turns the eect on and o.
(6)
Power Input - Connect a 9 V / >100 mA power supply.
(7)
Speed - Controls the time between the peaks of the
modulation eect.
(8)
Volume - Controls the level of the modulation eect.
(9)
Input
(ES) Controles
(1)
USB - Se conecta a su computadora para actualizaciones
de rmware y edición de TonePrint.
(2)
Type - Elija entre los ajustes de Chorus, TonePrint y Vibrato.
(3)
Intensity - Controla la profundidad del efecto de
modulación.
(4)
Output
(5)
Footswitch - Activa y desactiva el efecto.
(6)
Power Input - Conecte una fuente de alimentación
de 9 V /> 100 mA.
(7)
Speed - Controla el tiempo entre los picos del efecto
de modulación.
(8)
Volume - Controla el nivel del efecto de modulación.
(9)
Input
(FR) Réglages
(1)
USB - Se connecte à votre ordinateur pour les mises à jour du
micrologiciel et l’édition TonePrint.
(2)
Type - Choisissez entre les paramètres Chorus, TonePrint
et Vibrato.
(3)
Intensity - Contrôle la profondeur de l’eet de modulation.
(4)
Output
(5)
Footswitch - Active et désactive leet.
(6)
Power Input - Connectez une alimentation 9 V /> 100 mA.
(7)
Speed - Contrôle le temps entre les pics de leet de
modulation.
(8)
Volume - Contle le niveau de leet de modulation.
(9)
Input
(DE) Bedienelemente
(1)
USB - Stellt eine Verbindung zu Ihrem Computer für
Firmware-Updates und TonePrint-Bearbeitung her.
(2)
Type - Wählen Sie zwischen den Einstellungen für Chorus,
TonePrint und Vibrato.
(3)
Intensity - Steuert die Tiefe des Modulationseekts.
(4)
Output
(5)
Footswitch - Schaltet den Eekt ein und aus.
(6)
Power Input - Schließen Sie eine 9 V /> 100 mA
Stromversorgung an.
(7)
Speed - Steuert die Zeit zwischen den Spitzen
des Modulationseekts.
(8)
Volume - Steuert den Pegel des Modulationseekts.
(9)
Input
4 5VISCOUS VIBE VISCOUS VIBE
(PT) Controles
(1)
USB - Conecta-se ao seu computador para atualizações
de rmware e edição de TonePrint.
(2)
Type - Escolha entre as congurações de Chorus,
TonePrint e Vibrato.
(3)
Intensity - Controla a profundidade do efeito
de modulação.
(4)
Output
(5)
Footswitch - Liga e desliga o efeito.
(6)
Power Input - Conecte uma fonte de alimentação
de 9 V /> 100 mA.
(7)
Speed - Controla o tempo entre os picos do efeito
de modulação.
(8)
Volume - Controls the level of the modulation eect.
(9)
Input
(IT) Controlli
(1)
USB - Si collega al computer per gli aggiornamenti
del rmware e la modica del TonePrint.
(2)
Type - Scegli tra le impostazioni Chorus, TonePrint e Vibrato.
(3)
Intensity - Controlla la profondità dell’eetto di modulazione.
(4)
Output
(5)
Footswitch - Attiva e disattiva l’eetto.
(6)
Power Input - Collegare un alimentatore da 9 V /> 100 mA.
(7)
Speed - Controlla il tempo tra i picchi dell’eetto
di modulazione.
(8)
Volume - Controlla il livello dell’eetto di modulazione.
(9)
Input
(NL) Bediening
(1)
USB - Regelt het niveau van het modulatie-eect.
(2)
Type - Kies tussen de instellingen Chorus,
TonePrint en Vibrato.
(3)
Intensity - Regelt de diepte van het modulatie-eect.
(4)
Output
(5)
Footswitch - Zet het eect aan en uit.
(6)
Power Input - Sluit een 9 V /> 100 mA voeding aan.
(7)
Speed - Regelt de tijd tussen de pieken
van het modulatie-eect.
(8)
Volume - Regelt het niveau van het modulatie-eect.
(9)
Input
(SE) Kontroller
(1)
USB - Ansluts till din dator för rmwareuppdateringar
och TonePrint-redigering.
(2)
Type - Välj mellan insllningar för Chorus,
TonePrint och Vibrato.
(3)
Intensity - Styr djupet på moduleringseekten.
(4)
Output
(5)
Footswitch - Slår på och av eekten.
(6)
Power Input - Anslut en 9 V /> 100 mA strömrsörjning.
(7)
Speed - Styr tiden mellan topparna för
moduleringseekten.
(8)
Volume - Styr nivån på moduleringseekten.
(9)
Input
6 7VISCOUS VIBE VISCOUS VIBE
(PL) Sterownica
(1)
USB - Łączy się z komputerem w celu aktualizacji
oprogramowania sprzętowego i edycji TonePrint.
(2)
Type - Wybierz między ustawieniami Chorus,
TonePrint i Vibrato.
(3)
Intensity - Steruje głębią efektu modulacji.
(4)
Output
(5)
Footswitch - Włącza i wyłącza efekt.
(6)
Power Input - Poącz zasilanie 9 V /> 100 mA.
(7)
Speed - Kontroluje czas między szczytami efektu modulacji.
(8)
Volume - Kontroluje poziom efektu modulacji.
(9)
Input
8 9VISCOUS VIBE VISCOUS VIBE
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Important information:
Changes or modications to the equipment not expressly approved
by Music Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance
with Directive 2014/30/EU, Directive 2011/65/EU and Amendment
2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH
SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street,
Las Vegas NV 89118,
United States
Phone Number: +1 702 800 8290
VISCOUS VIBE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
VISCOUS VIBE
10 11VISCOUS VIBE VISCOUS VIBE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

TC Electronic VISCOUS VIBE Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI