Cambridge Casual HQ-14776 Installation guide

White Oak Backless Bench

HQ-14776

D. 1 1/4" Bolt E. 2 3/4" Bolt

QTY: 2 pcs

F. Nut

QTY: 2 pcs QTY: 8 pcs

G. Washer

QTY: 1 pc

A1. Right side frame

B. Seat C. Support

H. Nut I. Wrench

QTY: 1 pc

J. Allen Key

QTY: 1 pc QTY: 2 pcs

QTY: 2 pcs

A2. Left side frame

QTY: 1 pc

THE TABLE IS NOW READY FOR USE.

Insert 3 1/2" Bolt (E) into Right Side Frame (A1).

Reversed the Right Side Frame (A1) and attach the

Support (C), position as shown. Insert nut (H), Washer(G)

and nut (F) into 3 1/2" bolt (E) and tighten using Wrench (I).

Insert 3 1/2" Bolt (E) into Left Side Frame (A2).

Reversed the Left Side Frame (A2) and attach into Support

(C), position as shown. Insert nut (H), Washer(G) and nut

(F) into 3 1/2" bolt (E) and tighten using Wrench (I).

Make sure all parts are correctly connected and

tighten all bolts and nuts completely using

Allen key and Wrench.

Attach the seat (B) into pre-assembling frame.

And secure with 1 1/4" bolts (D) as shown.

Tighten the bolts using Allen key (J).

Download PDF