2. C2G
  3. OverheadCablePathways
OverheadCablePathways

C2G OverheadCablePathways Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the C2G OverheadCablePathways Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NOTES
MAXIMUM MOUNTED PATCH PANEL LOAD SHALL NOT EXCEED 50 LBS.1.
SEE SHEET 2 FOR MOUNTING OPTIONS TO CABLE TRAYS.2.
TITLE:
INSTRUCTION SHEET #: REV: ECN #: SHEET: DWN BY: DATE: CHK BY: DATE: APP. BY: DATE:
2/15/2017
ASSEMBLY INSTRUCTIONS
OR-71601927 00 1 of 2 JS 2/10/2017 JQ 2/10/2017 CV
Q-SERIES OVERHEAD RACK SYSTEM
WWW.LEGRAND.US
(2) CABLOFIL CABLE
TRAY MOUNTING
BRACKETS
SCREWS
MOUNTING
WASHERS
(8) SPLIT LOCK (8) PAN HEAD
MAIN BRACKET WELDMENT
2 POST OVERHEAD RACK
SYSTEM (2RU - 8RU SIZES)
TITLE:
INSTRUCTION SHEET #: REV: ECN #: SHEET: DWN BY: DATE: CHK BY: DATE: APP. BY: DATE:
Q-SERIES OVERHEAD RACK SYSTEM
ASSEMBLY INSTRUCTIONS
OR-71601927 00 2 of 3 JPS JQ 2/10/2017 CV 2/15/2017
WWW.LEGRAND.US
CABLE TRAY
TOP MOUNTING
STEP 2
DETERMINE THE MOUNTING POSITION OF THE UNIT. THE MOUNTING OPTIONS ARE: REAR TOP,
REAR MIDDLE, REAR BOTTOM, UNDERNEATH PARALLEL, UNDERNEATH PERPENDICULAR.
STEP 1
DETERMINE IF THE MOUNTING EQUIPMENT WILL MOUNT TO
EITHER A CABLE TRAY OR CEILING MOUNT
(THREADED RODS OR HANGERS NOT SUPPLIED).
CABLE TRAY
MIDDLE MOUNTING
CABLE TRAY
BOTTOM MOUNTING
UNDERNEATH PARALLEL
UNDERNEATH PERPENDICULAR
CABLE TRAY BRACKET
STEP 3
ONCE THE MOUNTING LOCATION IS DETERMINED, MOUNT 2 CABLE TRAY BRACKETS USING (8)
SPLIT LOCK WASHERS AND (8) PAN HEAD SCREWS.
CABLE TRAY BRACKETS
STEP 4
HANG ASSEMBLY ONTO CABLE TRAY WHERE REQUIRED.
INSTALLATION IS NOW COMPLETE.
TITLE:
INSTRUCTION SHEET #: REV: ECN #: SHEET: DWN BY: DATE: CHK BY: DATE: APP. BY: DATE:
Q-SERIES OVERHEAD RACK SYSTEM
ASSEMBLY INSTRUCTIONS
OR-71601927 00 3 of 3 JPS JQ 2/10/2017 CV 2/15/2017
WWW.LEGRAND.US
/