MORLEY M2M2 Owner's manual

MORLEY
Brand
MORLEY
Model
M2M2
Category
Guitar accessories
Type
Owner's manual

MORLEY M2M2 is a slide pot wah pedal, designed to be durable and easy to use. The slide pot design uses a monofilament cable to move the internal slide pot when the foot treadle is moved, which is more durable than traditional rotary pots. It also has a special lubricant to extend the slide pot life and prevent static and scratchiness. The M2M2 has a boost knob that can increase the wah level up to 20dB. It is powered by a 9V battery or a 9VDC 300mA regulated adapter (center polarity is negative). The M2M2 is switchless, so you simply step on to engage Wah and step off to go to bypass.

MORLEY M2M2 is a slide pot wah pedal, designed to be durable and easy to use. The slide pot design uses a monofilament cable to move the internal slide pot when the foot treadle is moved, which is more durable than traditional rotary pots. It also has a special lubricant to extend the slide pot life and prevent static and scratchiness. The M2M2 has a boost knob that can increase the wah level up to 20dB. It is powered by a 9V battery or a 9VDC 300mA regulated adapter (center polarity is negative). The M2M2 is switchless, so you simply step on to engage Wah and step off to go to bypass.

THANK YOU FOR CHOOSING A MORLEY PEDAL.
YOU NOW OWN THE BEST PEDAL MADE!
Please take a few minutes to familiarize yourself with the features of your new pedal. We hope you enjoy
using it as much as we enjoyed building it.
ABOUT OUR M2 SLIDE POT:
The M2M2 Tremonti Wah is designed to use a slide pot to control the Wah. A durable Monofilament
cable is used to move the internal slide pot when the foot treadle is moved. We have developed a special
lubricant to extend the slide pot life and prevent static and scratchiness of typical rotary pots. The M2M2
is only available in Europe.
ABOUT THE CONNECTIONS:
9V: To ensure noise free operation, ONLY Morley's 9VDC 300 mA regulated adapter should be used
(center polarity is negative)
IN: Input jack. Plug instrument into this jack using 1/4" guitar cable.
OUT: Connect amplifier to this jack using a 1/4" guitar cable.
USING AN AC ADAPTER:
All Morley pedals use Morley's 9VDC 300 milliamp regulated adapter. Center pin polarity is negative.
Using a non-regulated adapter could cause a low frequency hum in your amplifier.
Using an adapter with the wrong polarity may damage the pedal.
USING A BATTERY:
All Morley pedals are designed to use one 9V battery when not using an adapter. We suggest you use a
good quality alkaline battery. To prolong battery life, unplug your cord completely from the input jack
when not using the pedal. When the pedal is not used for extended periods, remove the battery from the
pedal. Our Quick Clip battery door allows for easy access to battery compartment.
ONE YEAR WARRANTY
All Morley® pedals are warranted for one year from date of purchase with a copy of dated purchase
receipt. To obtain warranty service, contact dealer where pedal was purchased.
M2 TREMONTI WAH (MODEL M2M2) FEATURES:
·
·
Switchless: Simply step on to engage Wah, step off to go to bypass.
·
·
Slide Pot: Internal slide pot and durable monofilament control Wah function.
·
·
Boost Knob: Increase Wah Level up to 20dB
M2M2 SPECIFICATIONS:
Power: 9V Battery or 9VDC 300mA regulated
(polarity: center negative)
Indicator: Right LED on = Wah on
Dimensions: 9.13" L x 5.88" W x 2.75" H
Current Draw: 14 mA @ 9VDC
Slide Pot: 100K Audio Taper
Weight: 3.7 lb./ 1.68 kg
www.morleyproducts.com
  • Page 1 1

MORLEY M2M2 Owner's manual

MORLEY
Brand
MORLEY
Model
M2M2
Category
Guitar accessories
Type
Owner's manual

MORLEY M2M2 is a slide pot wah pedal, designed to be durable and easy to use. The slide pot design uses a monofilament cable to move the internal slide pot when the foot treadle is moved, which is more durable than traditional rotary pots. It also has a special lubricant to extend the slide pot life and prevent static and scratchiness. The M2M2 has a boost knob that can increase the wah level up to 20dB. It is powered by a 9V battery or a 9VDC 300mA regulated adapter (center polarity is negative). The M2M2 is switchless, so you simply step on to engage Wah and step off to go to bypass.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents